2025 National 5 Physics marking instructions

Source: Scottish Qualifications Authority (SQA) / Qualifications Scotland. This is a StemInteract HTML companion, not an official HTML edition. Selectable text is supplied alongside original page images. Use the images or original PDF for equations, powers, fractions, vector notation, tables and diagrams; text extraction cannot fully preserve mathematical layout.

Jump to a question

PDF page 1

Original 2025 National 5 Physics marking instructions, PDF page 1; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
National

                   Qualifications
                   2025

                            2025  Physics

                             National   5

         Question   Paper  Finalised  Marking   Instructions

© Scottish Qualifications Authority 2025

These marking instructions have been prepared by examination teams for use by SQA appointed
markers when marking external course assessments.

The information in this document may be reproduced in support of SQA qualifications only on a non-
commercial basis. If it is reproduced, SQA must be clearly acknowledged as the source. If it is to be
reproduced for any other purpose, written permission must be obtained from permissions@sqa.org.uk.

PDF page 2

Original 2025 National 5 Physics marking instructions, PDF page 2; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
General marking principles for National 5 Physics

This information is provided to help you understand the general principles you must apply when
marking candidate responses to questions in this paper. These principles must be read in conjunction
with the detailed marking instructions, which identify the key features required in candidate
responses.

(a) Marks for each candidate response must always be assigned in line with these marking
    principles, the Physics: general marking principles (GMPs) (Physics: general marking principles -
    National 3 to Advanced Higher (sqa.org.uk)) and the detailed marking instructions for this
    assessment.

(b) Marking should always be positive. This means that, for each candidate response, marks are
    accumulated for the demonstration of relevant skills, knowledge and understanding: they are
    not deducted from a maximum on the basis of errors or omissions.

(c) If a specific candidate response does not seem to be covered by either the principles or detailed
    marking instructions, and you are uncertain how to assess it, you must seek guidance from your
    team leader.

(d) Where a candidate answers part of a question incorrectly and carries the incorrect answer
    forward in the following part, award marks if the incorrect answer has then been used correctly
    in the subsequent part or ‘follow-on’. (GMP 16)

(e) Award marks for non-standard symbols where the symbols are defined and the relationship is
    correct, or where the substitution shows that the relationship used is correct. This must be clear
    and unambiguous. (GMP 20)

(f) Award full marks for a correct final answer (including units if required) on its own, unless a
    numerical question specifically requires evidence of working to be shown, eg in a ‘show’
    question. (GMP 1)

(g) Award marks where a diagram or sketch conveys correctly the response required by the
    question. It will usually require clear and correct labels (or the use of standard symbols). (GMP
    19)

(h) Marks are allocated for knowledge of relevant relationships alone. Do not award a mark when a
    candidate writes down several relationships and does not select the correct one to continue
    with, for example by substituting values. (GMP 1c)

(i) Do not award marks if a ‘magic triangle’, eg , is the only statement in a candidate’s
    response.
                                                       V
    To gain the mark, the correct relationship must be stated eg V = IR or R= , etc. (GMP 2)
                                                       I
(j) In rounding to an expected number of significant figures, award the mark for correct answers
    which have up to two figures more or one figure less than the number in the data with the
    fewest significant figures. (GMP 6)
    (Note: the use of a recurrence dot, eg 0.6, would imply an infinite number of significant figures
    and would therefore not be acceptable.)

                               page 02

PDF page 3

Original 2025 National 5 Physics marking instructions, PDF page 3; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(k) The incorrect spelling of technical terms should usually be ignored and candidates should be
    awarded the relevant mark, provided that answers can be interpreted and understood without
    any doubt as to the meaning.
    Where there is ambiguity, do not award the mark. Two specific examples of this would be when
    the candidate uses a term:
       • that might be interpreted as reflection, refraction or diffraction, eg ‘defraction’
       • that might be interpreted as either fission or fusion, eg ‘fussion’
    The spelling of these words is similar, but the words have totally different meanings. If the
    spelling (or handwriting) in an answer makes it difficult for you to interpret a candidate’s
    intention, then do not award the mark. (GMP 22)

(l) Marks are awarded only for a valid response to the question asked. For example, in response to
    questions that ask candidates to:

    •  identify, name, give, or state, they need only name or present in brief form.
    •  describe, they must provide a statement or structure of characteristics and/or features.
    •  explain, they must relate cause and effect and/or make relationships between things clear.
    •  determine or calculate, they must determine a number from given facts, figures or
       information.

    •  estimate, they must determine an approximate value for something.
    •  justify, they must give reasons to support their suggestions or conclusions, eg this might be
       by identifying an appropriate relationship and the effect of changing variables.
    •  show that, they must use physics (and mathematics) to prove something, eg a given value.
       All steps, including the stated answer, must be shown
    •  predict, they must suggest what may happen based on available information.

    •  suggest, they must apply their knowledge and understanding of physics to a new situation. A
       number of responses are acceptable: award marks for any suggestions that are supported by
       knowledge and understanding of physics.
    •  use your knowledge of physics or aspect of physics to comment on, they must apply their
       skills, knowledge and understanding to respond appropriately to the problem/situation
       presented, for example by making a statement of principle(s) involved and/or a relationship
       or equation, and applying these to respond to the problem/situation. They will gain credit
       for the breadth and/or depth of their conceptual understanding.

                               page 03

PDF page 4

Original 2025 National 5 Physics marking instructions, PDF page 4; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Common issues with candidate responses

When marking National 5 Physics, there are some common issues that arise when considering
candidates’ answers.

There is often a range of acceptable responses which would sensibly answer a particular question.
However, it is often difficult to anticipate all correct or partially correct responses to questions.

The detailed marking instructions contain ideal answers, and examples of other acceptable answers
which offer guidance for interpreting candidates’ responses. They may also contain advice on answers
which are not acceptable, or only attract partial marks.

Units

Do not penalise use of upper/lower case when the abbreviated version is given, as long as it can be
clearly identified, eg DB, sV, hZ, bq.

However, take care to ensure the unit has the correct prefix, eg for an answer t = 0.005 seconds,
t = 5 ms is acceptable but t = 5 Ms is not.

Where a candidate makes multiple unit errors or conversion errors/omissions in any part of a question,
penalise once only. For example, when calculating speed from distance and time, and the answer is
required to be in ms⁻¹.

If  d = 4 km and t = 2 minutes

                       d
                     v=         (1)
                        t
                       4000000
                     v=         (1)
                          2
                     v=2000000  (0)
Although the candidate has made three unit errors, (not correctly converted distance or time and has
omitted the final unit), do not award the final mark only.

Some common units often attract incorrect abbreviations in answers to numerical questions.
When the abbreviation can be confused with a different unit then the final mark cannot be awarded,
eg sec or secs as an abbreviation for seconds is not acceptable.

 Common units and abbreviations
 Acceptable unit and abbreviation unacceptable version
 second, s                       sec, secs
 hours, h                        hr, hrs
 ampere, amp, amps, A, a
 metres per second, m/s, m s⁻¹   mps, m/s⁻¹
 metres per second per second, m/s², m s⁻² m/s/s, mpsps, m/s⁻²
 joules per kilogram per degree celsius,
                                 J/kg/ºC
 J kg⁻¹ ºC⁻¹, J/kg ºC

                               page 04

PDF page 5

Original 2025 National 5 Physics marking instructions, PDF page 5; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Standard form

Where a candidate fails to express an answer in standard form correctly, treat it as an arithmetic
error and do not award the final mark. For example:

For an answer t = 400 000 s, then t = 4×10⁵ s would be correct but t = 4⁵ s would be treated as an
arithmetic error. (GMP 10)

Incorrect answer carried forward (GMP 16)

Do not apply a further penalty where a candidate carries forward an incorrect answer to part of a
question, and uses that incorrect answer correctly:
  •  within that part of the question, eg from (a)(i) to (a)(ii)
  •  or to the next part of the question, eg from (a) to (b).

Similarly, if a candidate has selected the wrong value in a question which requires a data value, then
award full marks in the subsequent answer for a correct response that uses either the candidate’s
wrong value or the correct data value. For example:
(a)  State the speed of microwaves in air.
     Candidate’s answer: 240 m s⁻¹. This answer would attract zero marks.

(b)  Calculate the distance travelled by these microwaves in 0.34 seconds.
     The candidate may use either the value given in part (a) or the correct value for the speed,
     and could gain full marks if correctly completed.

Where an incorrect answer may be carried forward, this is indicated in the additional guidance column
of the detailed marking instructions by the comment ‘or consistent with part...’.

Standard three marker

The examples below set out how to apportion marks to answers requiring calculations. These are the
‘standard three marker’ type of questions.

Award full marks for a correct answer to a numerical question, even if the steps are not shown
explicitly, unless it specifically requires evidence of working to be shown.

For some questions requiring numerical calculations, there may be alternative methods
(eg alternative relationships) that would lead to a correct answer.

Sometimes, a question requires a calculation which does not fit into the ‘standard three marker’ type
of response. In these cases, the detailed marking instructions will contain guidance for marking the
question.

When marking partially correct answers, apportion individual marks as shown over the page.

                               page 05

PDF page 6

Original 2025 National 5 Physics marking instructions, PDF page 6; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Example of a ‘standard three marker’ question

The current in a resistor is 1.5 amperes when the potential difference across it is 7.5 volts.
Calculate the resistance of the resistor. (3 marks)

        Example response Mark and comment

     1. V = IR          1 mark: relationship
        7.5 = 1.5R      1 mark: substitution

        R = 5.0 Ω       1 mark: correct answer

     2. 5.0 Ω           3 marks: correct answer
     3. 5.0             2 marks: unit missing

     4. 4.0 Ω           0 marks: no evidence, wrong answer

     5. __ Ω            0 marks: no working or final answer
     6.    V  7.5
        R = =    =4.0 Ω 2 marks: arithmetic error
           I  1.5
     7.    V
        R =  =4.0 Ω     1 mark: relationship only
           I
     8.   V
        R= =__Ω         1 mark: relationship only
          I
     9.    V  7.5
        R = =    = __Ω  2 marks: relationship and substitution, no final answer
           I  1.5
    10.   V  7.5
        R=  =   =4.0    2 marks: relationship and substitution, wrong answer
           I 1.5
    11.   V   1.5
        R=  =   =5.0 Ω  1 mark: relationship but wrong substitution
           I  7.5
    12.    V  75
        R=  =   =5.0 Ω  1 mark: relationship but wrong substitution
           I  1.5
    13.    I  1.5
        R=  =   =5.0 Ω  0 marks: wrong relationship
          V   7.5
    14. V = IR
        7.5 = 1.5 × R
        R = 0.2 Ω       2 marks: relationship and substitution, arithmetic error
    15. V = IR

           I  1.5
        R=  =   =0.2 Ω  1 mark: relationship correct but wrong rearrangement of
          V   7.5
                               symbols

                               page 06

PDF page 7

Section 1, Question 1Section 1, Question 2Section 1, Question 3Section 1, Question 4Section 1, Question 5Section 1, Question 6Section 1, Question 7Section 1, Question 8Section 1, Question 9Section 1, Question 10Section 1, Question 11Section 1, Question 12Section 1, Question 13Section 1, Question 14Section 1, Question 15Section 1, Question 16Section 1, Question 17Section 1, Question 18Section 1, Question 19Section 1, Question 20Section 1, Question 21Section 1, Question 22Section 1, Question 23Section 1, Question 24Section 1, Question 25
Original 2025 National 5 Physics marking instructions, PDF page 7; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Marking instructions for each question

Section 1

  Question   Answer      Mark

     1.         B         1

     2.         A         1
     3.         D         1

     4.         A         1

     5.         E         1

     6.         D         1
     7.         C         1

     8.         C         1

     9.         E         1

    10.         C         1

    11.         E         1
    12.         A         1

    13.         D         1

    14.         D         1

    15.         A         1

    16.         B         1
    17.         C         1

    18.         C         1

    19.         D         1

    20.         D         1
    21.         B         1

    22.         B         1

    23.         E         1

    24.         A         1

    25.         B         1

                               page 07

PDF page 8

Section 2, Question 1
Original 2025 National 5 Physics marking instructions, PDF page 8; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Section 2

                                        Max
  Question        Expected response               Additional guidance
                                        mark
1.  (a) (i) Using Pythagoras:            2   Ignore any direction stated in the
                                             final answer in this part.
            Resultant² = 36² + 15² (1)
            Resultant = 39 m       (1)       If clear arithmetic error shown in
                                             32 + 4 = 36 then MAX (1) mark for
                                             substitution consistent with
            Using scale diagram:             arithmetic error.
                                             No requirement for arrows to be
                                             shown on diagram to calculate the
                                             magnitude of displacement.

                                             Regardless of method, if a
                                             candidate shows a vector diagram
                                             (or a representation of a vector
                                             diagram ie a triangle with no
                                             arrows) and the vectors have been
                                             added incorrectly, eg head-to-head
                                             then MAX (1).

                                             Accept:
                                             40
                                             39.0
                                             39.00

            Vectors to scale       (1)
            Resultant = 39 m       (1)
            (allow ± 1 m tolerance)

                               page 08

PDF page 9

Original 2025 National 5 Physics marking instructions, PDF page 9; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                        mark
1.  (a) (ii) Using trigonometry:         2   Or use of resultant value (and
                 15                          appropriate trigonometry)
            tanθ=
                                   (1)       consistent with (a)(i).
                 36
            (θ=23 )
                                             Regardless of method, if a
                                             candidate shows a vector diagram
            direction = 337        (1)
                                             (or a representation of a vector
                                             diagram ie a triangle with no
                                             arrows) and the vectors have been
            Using scale diagram:
                                             added incorrectly, eg head-to-head
                                             then MAX (1).
                                             Alternative methods:
                                                  36
                                             tanθ =      (1)
                                                  15
                                             (θ =67 )
                                             direction = 337 (1)
                                             OR
                                             Can also do using other trig
                                             functions, eg
                                                  15          36
                                             sinθ =  OR  cosθ =
                                                  39          39
                                             Ignore the degree symbol if the
                                             direction is stated as a bearing.
                                             Accept:
                                             23º West of North
                                             67º North of West
                                             Can obtain first mark for scale
            Vectors to scale       (1)       diagram method from suitable
                                             diagram in part (a)(i) if not drawn
            Direction = 337        (1)
                                             in this part. However, the
            (allow ±2º tolerance)
                                             candidate must attempt an answer
                                             in this part.
                                             Ignore any magnitude stated in the
                                             final answer in this part.
                                             Do not accept incorrect statements
                                             of trig functions at substitution
                                             stage, eg
                                                 15
                                             tan =
                                                 36
                                             Accept:
                                             20º W of N 340
                                             22·6º W of N 337.4
                                             22·62º W of N 337.38

                               page 09

PDF page 10

Original 2025 National 5 Physics marking instructions, PDF page 10; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                        mark
1.  (b)      s =vt                 (1)   3   Or consistent with (a)(i) and/or
                                             (a)(ii).
            39=v ×55               (1)
             v =0.71 ms⁻¹ at 337   (1)       Bar not required above v
                                             Accept d = vt provided it is
                                             followed by a substitution of the
                                             value for displacement.

                                             Direction required for final mark.

                                             Accept:
                                             0.7
                                             0.709
                                             0.7091

    (c)     E_{w} = Fd             (1)   3   If clear arithmetic error in
                                             calculation of total distance, then
            E_{w} =68×(32+15+4)    (1)
                                             MAX (2).
            E_{w} =3500 J          (1)
                                             Accept:
                                             3000
                                             3470
                                             3468

                               page 10

PDF page 11

Section 2, Question 2
Original 2025 National 5 Physics marking instructions, PDF page 11; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                       mark
2.  (a) (i) W =mg                  (1)   3   Accept:
                                             1 × 10⁷
            W =1.43×10⁶×9.8        (1)
                                             1.40 × 10⁷
            W =1.4×10⁷ N           (1)       1.401 × 10⁷
        (ii) F = 2.28×10⁷−1.4×10⁷  (1)   4   Or consistent with (a)(i).
                                   (1)       Calculation of unbalanced force
                F =ma
                                             may be implied by correct
            (            )         (1)
             2.28×10⁷−1.4×10⁷ =1.43×10⁶×a    substitution.
                                   (1)
                a= 6.2 ms⁻²
                                             If no attempt to calculate the
                                             unbalanced force, then MAX (1) for
                                             the relationship.
                                             If clear arithmetic error in
                                             calculation of unbalanced force,
                                             then MAX (3).
                                             Accept:
                                             6
                                             6.15
                                             6.154
    (b) (i)                              2   (1) for each force correctly labelled
                               (1)           with corresponding direction.
                                             Accept if arrows do not touch the
                                             section.

                                             Accept:
                                             ‘force due to gravity’.
                                             ‘gravitational pull’.
                                             ‘pull of gravity’.

                                             Do not accept:
                                             ‘upward force’ alone.
                                             ‘upthrust’.
                                             ‘wind resistance’.
                                             ‘gravitational field strength’ alone.
                                             ‘gravity’ alone.
                                             ‘gravity/weight’.

                                             Ignore horizontal forces.
                              (1)
                                             Where a candidate has identified
                                             more than two vertical forces,
                                             apply +/- rule for other vertical
                                             forces.

                               page 11

PDF page 12

Original 2025 National 5 Physics marking instructions, PDF page 12; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                       mark
2.  (b) (ii) Air resistance/friction is increased 2 Independent marks.
            (by parachute).        (1)
                                             Accept:
                                             ‘upward force increases’.
                                             ‘drag increases’.
            producing an unbalanced force    Accept:
            (upwards).              (1)      ‘upward force is greater than
                                             downward force’.
                                             ‘friction is greater than weight’.

        (iii) 9300 N                (1)  2   MUST JUSTIFY

            Constant velocity                Accept:
            (means that forces must be       ‘constant speed’.
            balanced/equal and opposite). (1) ‘it has reached terminal velocity’.

                               page 12

PDF page 13

Section 2, Question 3
Original 2025 National 5 Physics marking instructions, PDF page 13; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                        mark
3.          Award 3 marks where the candidate 3 Candidates may use a variety of
            has demonstrated a good          physics arguments to answer this
            understanding of the physics involved. question.
            They show a good comprehension of
            the physics of the situation and Award marks based on candidates
            provide a logically correct answer to demonstrating overall good,
            the question posed. This type of reasonable, limited, or no
            response might include a statement of understanding.
            the principles involved, a relationship
            or an equation, and the application of
            these to respond to the problem. The
            answer does not need to be
            ‘excellent’ or ‘complete’ for the
            candidate to gain full marks.

            Award 2 marks where the candidate
            has demonstrated a reasonable
            understanding of the physics involved.
            They make some statement(s) that are
            relevant to the situation, showing that
            they have understood the problem.
            Award 1 mark where the candidate
            has demonstrated a limited
            understanding of the physics involved.
            They make some statement(s) that are
            relevant to the situation, showing that
            they have understood at least a little
            of the physics within the problem.
            Award 0 marks where the candidate
            has not demonstrated an
            understanding of the physics involved.
            There is no evidence that they have
            recognised the area of physics
            involved, or they have not given any
            statement of a relevant physics
            principle. Award this mark also if the
            candidate merely restates the physics
            given in the question.

                               page 13

PDF page 14

Section 2, Question 4
Original 2025 National 5 Physics marking instructions, PDF page 14; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                       mark
4.  (a)     It experiences a (gravitational) 2 Independent marks.
            slingshot/catapult (from Mars) (1)
                                             Accept a description of the
                                             gravitational slingshot/catapult.

            (causing) an increase in its     Accept: (causing it to) accelerate.
            speed/velocity/kinetic energy. (1)

    (b) (i) (The unbalanced force) is applied 1
            over an extended/long period of
            time.

        (ii) (As the spacecraft moves away from 1 Accept:
            the Sun the solar cells) receive less ‘receives less solar energy’.
            light/energy (from the Sun).     ‘receives less solar power’.
                                             ‘less power from the Sun’.

                                             Accept:
                                             in case the spacecraft is in the
                                             shade of/behind planets/moons.

                                             Do not accept an indication that
                                             there is no light/energy (from the
                                             Sun).

                                             Do not accept a response in terms
                                             of ‘greater distance from the Sun’
                                             alone.
    (c) (i)       56                   1   Accept:
            period=                        1 day.
                  41
                                             1.37 days.
            period=1.4 days                  1.366 days.
                                             Accept correct answer given in
                                             other units of time.

        (ii) (The orbital period) decreases. 1 Do not accept answers in terms of
                                             speed alone.

                                             Ignore any extraneous information.

                               page 14

PDF page 15

Section 2, Question 5
Original 2025 National 5 Physics marking instructions, PDF page 15; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                       mark
5.  (a)     The metal dishes become positively 1
            charged/have the same charge (as
            the dome).
            OR

            Like/similar/same charges repel.

    (b) (i) Q= It                  (1)   3   Accept:
                                             3 × 10⁻³
            2.50×10⁻⁶ = I×0.80×10⁻³ (1)
                                             3.13 × 10⁻³
            I =3.1×10⁻³ A          (1)       3.125 × 10⁻³
        (ii)             2.50×10⁻⁶     1   Accept:
              number of electrons= 1.60×10⁻¹⁹   1.6 × 10¹³
                                             1.563 × 10¹³
                         =1.56×10¹³ (1)
                                             1.5625 × 10¹³

                               page 15

PDF page 16

Section 2, Question 6
Original 2025 National 5 Physics marking instructions, PDF page 16; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                        mark
6.  (a)     ammeter in series with resistor R (1) 2 MAX (1) mark if circuit is not a
                                             functioning circuit (eg not
            voltmeter in parallel with resistor R
                                             complete, connections would not
                                   (1)
                                             allow correct measurements to be
                                             taken, or open switch).
                                             Accept multiple
                                             ammeters/voltmeters, providing
                                             they are positioned appropriately.
    (b)              3.0−0.2             2   Can use any other points on the
             gradient=             (1)
                                             line.
                     0.05−0
                    (=56)
                                             Substitution of any valid pair of
            resistance=56 Ω        (1)       points from the line into gradient
                                             formula.              (1)
                                             Value for resistance. (1)
                                             Do not accept a value calculated
                                             using a single point on the line (0)
                                             For any value for resistance stated
                                             on its own, without any working,
                                             accept a value within the range:
                                             54.5 – 57.5 Ω.
                                             Accept 1-4 significant figures in
                                             final answer.

    (c)     (Resistance is) changing/    1   Accept: ‘non-ohmic’.
            not constant/increasing.

                               page 16

PDF page 17

Section 2, Question 7
Original 2025 National 5 Physics marking instructions, PDF page 17; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                       mark
7.  (a)     If one of the spotlights develops a 1 Accept:
            fault, the rest will stay on. (1) ‘LED’ or ‘light’.
            OR                               Do not accept:
                                             ‘independent switching’.
            So, all the spotlights operate at the ‘same voltage’ alone.
            correct voltage/voltage across each ‘same brightness’ alone.
            branch (of the circuit) is 12 V. (1) ‘same current’.

    (b)          P = IV            (1)  3    Accept:
                                             2
            (4.8×4)= I×12          (1)
                                             1.60
                 I =1.6 A          (1)       1.600
                                             Alternative method 1:
                                               P= IV     (1)
                                             4.8= I×12

                                               I =0.4 A
                                             Iₜₒₜₐₗ =0.4×4 (1)
                                             Iₜₒₜₐₗ =1.6 A (1)

                                             Alternative method 2:
                                                   V²
                                                P=
                                                   R
                                                   12²
                                             (4.8×4)=
                                                   R
                                                R=7.5 Ω
                                                V =IR    (1) both relationships
                                                12=I×7.5 (1) all substitutions
                                                 I =1.6 A (1)
                                             Alternative method 3:
                                                   V²
                                                P=
                                                   R
                                                   12²
                                             (4.8×4)=
                                                   R
                                                R=7.5 Ω
                                                P=I²R    (1) both relationships
                                             (4.8×4)=I²×7.5 (1) all substitutions
                                                 I =1.6 A (1)
    (c) (i) M OSFET                     1    Accept: ‘transistor’ in place of
                                             MOSFET.
                                             Do not accept: ‘npn transistor’ or
                                             ‘pnp transistor’.

                               page 17

PDF page 18

Original 2025 National 5 Physics marking instructions, PDF page 18; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                       mark
7.  (c) (ii) (As light level decreases), the 3 Independent marks.
            resistance of the LDRincreases. (1)
                                             Accept ‘X’ or ‘transistor’ in place of
            The voltage across the LDR       MOSFET.
            increases.             (1)
                                             Accept naming of component X
            (When voltage across the LDR     consistent with part (c)(i).
            reaches a certain value) the MOSFET
            switches on.           (1)       Accept MOSFET
                                             conducts/saturates/activates.
                                             Ignore any value for switching
                                             voltage stated.

                               page 18

PDF page 19

Section 2, Question 8
Original 2025 National 5 Physics marking instructions, PDF page 19; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                        mark
8.          Award 3 marks where the candidate 3 Candidates may use a variety of
            has demonstrated a good          physics arguments to answer this
            understanding of the physics involved. question.
            They show a good comprehension of
            the physics of the situation and Award marks based on candidates
            provide a logically correct answer to demonstrating overall good,
            the question posed. This type of reasonable, limited, or no
            response might include a statement of understanding.
            the principles involved, a relationship
            or an equation, and the application of
            these to respond to the problem. The
            answer does not need to be
            ‘excellent’ or ‘complete’ for the
            candidate to gain full marks.

            Award 2 marks where the candidate
            has demonstrated a reasonable
            understanding of the physics involved.
            They make some statement(s) that are
            relevant to the situation, showing that
            they have understood the problem.
            Award 1 mark where the candidate
            has demonstrated a limited
            understanding of the physics involved.
            They make some statement(s) that are
            relevant to the situation, showing that
            they have understood at least a little
            of the physics within the problem.
            Award 0 marks where the candidate
            has not demonstrated an
            understanding of the physics involved.
            There is no evidence that they have
            recognised the area of physics
            involved, or they have not given any
            statement of a relevant physics
            principle. Award this mark also if the
            candidate merely restates the physics
            given in the question.

                               page 19

PDF page 20

Section 2, Question 9
Original 2025 National 5 Physics marking instructions, PDF page 20; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question            Answer                      Additional guidance
                                       mark
9.  (a) (i) Eₕ =cmΔT               (1)   3   Calculation of temperature change
                                             may be implied by correct
              =4180×0.38×(22−0)    (1)
                                             substitution of 22.
              =35000 J             (1)
                                             Accept: (0 – 22) for temperature
                                             change.
                                             Ignore minus sign in final answer.
                                             Accept:
                                             30 000
                                             34 900
                                             34 940

        (ii)    E                        3   Or consistent with a(i).
              P=                   (1)
                 t
                                             Ignore negative value in
                35000
            120=                   (1)       substitution of energy, but not in
                  t
                                             final value of time.
              t =290 s             (1)
                                             Accept:
                                             300
                                             292
                                             291.7
        (iii) P ut a lid on/insulate (the machine). 1 Do not accept:
                                             ‘use a heat shield’.
                                             ‘place it in a colder environment’.
                                             Do not accept if candidate states
                                             that improvement would reduce
                                             heat loss to the surroundings.
    (b)          Eₕ =ml            (1)   3   Accept:
                                             0.046
            15.3×10³ =m×3.34×10⁵   (1)
                                             0.045 81
                  m=0.0458 kg      (1)       0.045 808

                               page 20

PDF page 21

Section 2, Question 10
Original 2025 National 5 Physics marking instructions, PDF page 21; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                        mark
10. (a)     The (air) particles collide with the 1 Ignore any extraneous information.
            walls (of the syringe).
                                             Accept ‘atoms’/’molecules’ in
                                             place of ‘particles’.
    (b) (i) Suitable scales, labels, and units. (1) 3 A non-linear scale on either axis
                                             prevents access to any marks. (0)
            All points plotted accurately to
            ±half a division.      (1)       Allow broken axes from origin (with
                                             or without symbol), but scale must
            Best fit straight line. (1)      be linear across data range.

                                             Axes can be transposed.

                                             A bar chart/histogram can obtain
                                             MAX (1) for scales, labels, and
                                             units.

        (ii) (Pressure is) inversely proportional 1 Must be consistent with line
            (to volume).                     candidate has drawn.
            OR                               If the candidate has not shown a
                                             best fit straight line in (b)(i) this
            Pressure is directly proportional to mark cannot be accessed.
            1 /volume.
                                             If the candidate has used a non-
                                             linear scale in (b)(i) this mark
                                             cannot be accessed.

                                             Accept:
                                                 1
                                              p∝    OR  pV = constant
                                                 V
                                             Pressure is proportional to ¹
                                                                V
                                             There is a linear relationship
                                             between pressure and ¹
                                                             V
                                             Allow ±one division tolerance for
                                             line passing through origin (or
                                             would pass through origin if
                                             extrapolated) for a statement of
                                             inverse or direct proportion.

                                             Do not accept:
                                             ‘as volume decreases pressure
                                             increases’.

                               page 21

PDF page 22

Original 2025 National 5 Physics marking instructions, PDF page 22; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response                Additional guidance
                                        mark
10. (b) (iii)         1                  2   Must be consistent with the line
            From graph: ( =) 0.23  (1)
                                             the candidate has drawn.
                      V
                                             Ignore any units after the selected
            volume = 4.3 ml        (1)
                                             value of 1/V
                                             If the candidate has not shown a
                                             curve or line in (b)(i) these marks
                                             cannot be accessed.
                                             If the candidate has used a non-
                                             linear scale in (b)(i) these marks
                                             cannot be accessed.
                                             Accept 1-4 significant figures.

    (c)     Repeat (measurements) and    1   Do not accept:
            average.                         ‘repeat measurements’ alone.
                                             ‘more readings’ alone.
            OR
                                             Do not accept responses in terms
            Repeat (measurements) to identify of accuracy or precision.
            outliers/rogue points.

            OR
                                             Apply +/- rule for surplus answers.
            Increase the range of volumes.
            OR

            Increase the number of different
            volumes.

                               page 22

PDF page 23

Section 2, Question 11
Original 2025 National 5 Physics marking instructions, PDF page 23; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                       mark
11. (a)     (Particle) vibrations/oscillations are 1 Accept:
            at 90º/right angles/perpendicular to ‘particles move up and down’ to
            the direction of energy transfer. indicate a vibration/oscillation
                                             ‘disturbance’ to indicate a
            OR                               vibration/oscillation.
            (Particle) vibrations/oscillations are Do not accept:
            at 90º/right angles/perpendicular to ‘ particles move perpendicular…’.
            the direction the wave is travelling.

    (b) (i)    N                         2   ‘Show’ question
            f =                    (1)
               t                             Must state relationship or (0)
                500                          marks.
            f =
                                   (1)
               (30×60)
                                             Calculation can be carried out in
            f =0.28 Hz                       steps, but all steps must be shown
                                             for the substitution mark to be
                                             awarded (ie 30 × 60).
                                             Final answer of 0.28 Hz, including
                                             unit, must be shown or MAX (1).
                                             Alternative method:
                                                1
                                              f =           (1)
                                                T
                                                  1
                                              f = ₍         (1)
                                                 30×60)
                                                 500
                                              f =0.28 Hz
                                             For the second mark to be awarded
                                             it must be shown how the period is
                                             calculated.
        (ii)  d =vt                (1)   3   Bar not required above v.
            160=v×32               (1)
                                             Accept:
              v =5.0 ms⁻¹          (1)       5
                                             5.00
                                             5.000
        (iii) v= fλ                (1)   3   Or consistent with (b)(ii)
            5.0 =0.28×λ            (1)
                                             Accept:
             λ=18 m                (1)       20
                                             17.9
                                             17.86

                               page 23

PDF page 24

Section 2, Question 12
Original 2025 National 5 Physics marking instructions, PDF page 24; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                       mark
12. (a) (i)        d =vt           (1)   2   ‘Show’ question.
            20200×10³ =3.0×10⁸×t   (1)       Must state relationship or (0)
                                             marks.
                    t =0.067 s
                                             Final answer of 0.067 s, including
                                             unit, must be shown or MAX (1).
                                             Accept use of D=ST relationship,
                                             provided use of S for speed is
                                             clarified by substitutions.

        (ii) It is not geostationary. (1) 2  MUST JUSTIFY.

            It does not have an (orbital) period Accept converse justification (eg
            of 24 hours.                     geostationary satellites have an
                                             orbital period of 24 hours).
            OR

            It is not at an (orbital) altitude of
            36 000 km.             (1)

    (b) (i) CCD                          1   Accept:
                                             LDR.
            OR                               thermistor.
                                             thermocouple.
            photodiode
                                             Do not accept:
            OR                               IR/infrared camera.
                                             photographic film.
            phototransistor                  (black-bulb) thermometer.
                                             thermogram.
                                             Apply +/- rule for surplus answers.

        (ii)     v= fλ             (1)   3   Accept:
                                             3 × 10¹⁴
            3.0×10⁸ = f ×904×10⁻⁹  (1)
                                             3.32 × 10¹⁴
                 f = 3.3×10¹⁴ Hz   (1)       3.319 × 10¹⁴
        (iii) d =vt                (1)   4   Accept:
                                             200
              d =3.0×10⁸×1.2×10⁻⁶  (1)
                                             180.0
                                             Alternative method:
                    3.0×10⁸×1.2×10⁻⁶
            distance=              (1)            1.2×10⁻⁶
                          2                  time=            (1)
                                                     2
                  =180 m           (1)
                                             d =vt            (1)
                                                       1.2×10⁻⁶
                                             d =3.0×10⁸×      (1)
                                                          2
                                             d =180 m         (1)

                               page 24

PDF page 25

Section 2, Question 13
Original 2025 National 5 Physics marking instructions, PDF page 25; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response               Additional guidance
                                        mark
13.  (a)     X: (angle of) incidence     1    Both required.
             Y: (angle of) refraction
                                              Do not accept:
                                              ‘ray of incidence’.
                                              ‘ ray of refraction’.

     (b)     Refraction takes place.     2    Independent marks.

             OR                               Accept:
                                              There is a change in wavelength.
             There is a change in speed.
                                              Do not award first mark if candidate
             OR                               states there is a change in
                                              frequency.
             The ray is moving from a less
             (optically) dense into a more    Do not award first mark if candidate
             (optically) dense medium. (1)    indicates there is an increase in
                                              speed.

                                              Accept: ‘The incident ray is not
                                              along the normal’ for the second
             The angle of incidence is greater mark.
             t han 0º               (1)

     (c)     Appropriate change in direction 1 L ine must be passably straight.
             away from normal.

                               page 25

PDF page 26

Section 2, Question 14
Original 2025 National 5 Physics marking instructions, PDF page 26; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                       mark
14. (a)     Alpha and beta are unable to reach 1 Accept response in terms of ability
            the detector.                    to penetrate the ground/layers/
                                             etc.
            OR
                                             Accept response in terms of what
            (Only) gamma will reach the      would/would not be absorbed by
            detector.                        ground/layers/etc.
    (b) (i) Time for activity to (decrease by) 1 Do not accept:
            half.                            Time for radiation/radioactivity/
                                             count rate to half.
            OR

            Time for half the nuclei to decay.

        ( ii) sodium-24            (1)   2   MUST JUSTIFY.

            it is a gamma emitter and has a  Accept for justification:
            suitable half-life     (1)       bismuth-204 is a beta emitter only.
                                             barium-133 half-life too long.
                                             barium-137m half-life too short.
                                             Must have all three.
    (c) (i) 150 s                        1   ±10 s

        (ii) 50 kBq                      1   Accept any single value between
                                             40 kBq and 60 kBq inclusive.

                               page 26

PDF page 27

Section 2, Question 15
Original 2025 National 5 Physics marking instructions, PDF page 27; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                       mark
15. (a) (i) H =Dwᵣ                 (1)   3   Accept:
                                             3 × 10⁻⁷
            0.25×10⁻⁶ = D×1        (1)
                                             2.50 × 10⁻⁷
            D=2.5×10⁻⁷ Gy          (1)       2.500 × 10⁻⁷
        (ii)       E                     3   Or consistent with (a)(i).
                D=                 (1)
                   m
                                             Accept:
                   E
            2.5×10⁻⁷ =             (1)       2 × 10⁻⁵
                   64
                                             1.60 × 10⁻⁵
                E=1.6×10⁻⁵J        (1)
                                             1.600 × 10⁻⁵
    (b)     When an (uncharged) atom gains or 1
            loses/gains/loses an electron/
            electrons.
    (c)     Limit the time near machine. 1   Do not accept:
                                             ‘wear a film badge’.
            OR
                                             Only accept protective clothing if
            Keep distance from machine.      clarified (eg lead apron).
            OR                               Apply +/- rule for surplus answers.
            Stand behind shielding.

                       [END OF MARKING INSTRUCTIONS]

                               page 27