2024 National 5 Physics marking instructions

Source: Scottish Qualifications Authority (SQA) / Qualifications Scotland. This is a StemInteract HTML companion, not an official HTML edition. Selectable text is supplied alongside original page images. Use the images or original PDF for equations, powers, fractions, vector notation, tables and diagrams; text extraction cannot fully preserve mathematical layout.

Jump to a question

PDF page 1

Original 2024 National 5 Physics marking instructions, PDF page 1; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
National

                   Qualifications
                   2024

                           2024   Physics

                            National    5

      Question    Paper   Finalised    Marking   Instructions

 Scottish Qualifications Authority 2024

These marking instructions have been prepared by examination teams for use by SQA appointed
markers when marking external course assessments.

The information in this document may be reproduced in support of SQA qualifications only on a non-
commercial basis. If it is reproduced, SQA must be clearly acknowledged as the source. If it is to be
reproduced for any other purpose, written permission must be obtained from permissions@sqa.org.uk.

PDF page 2

Original 2024 National 5 Physics marking instructions, PDF page 2; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
General marking principles for National 5 Physics

This information is provided to help you understand the general principles you must apply when
marking candidate responses to questions in this paper. These principles must be read in conjunction
with the detailed marking instructions, which identify the key features required in candidate
responses.

(a) Marks for each candidate response must always be assigned in line with these marking
    principles, the Physics: general marking principles (GMPs) (Physics: general marking principles -
    National 3 to Advanced Higher (sqa.org.uk)) and the detailed marking instructions for this
    assessment.

(b) Marking should always be positive. This means that, for each candidate response, marks are
    accumulated for the demonstration of relevant skills, knowledge and understanding: they are
    not deducted from a maximum on the basis of errors or omissions.

(c) If a specific candidate response does not seem to be covered by either the principles or detailed
    marking instructions, and you are uncertain how to assess it, you must seek guidance from your
    team leader.

(d) Where a candidate answers part of a question incorrectly and carries the incorrect answer
    forward in the following part, award marks if the incorrect answer has then been used correctly
    in the subsequent part or ‘follow-on’. (GMP 16)

(e) Award marks for non-standard symbols where the symbols are defined and the relationship is
    correct, or where the substitution shows that the relationship used is correct. This must be clear
    and unambiguous. (GMP 20)

(f) Award full marks for a correct final answer (including units if required) on its own, unless a
    numerical question specifically requires evidence of working to be shown, eg in a ‘show’
    question. (GMP 1)

(g) Award marks where a diagram or sketch conveys correctly the response required by the
    question. It will usually require clear and correct labels (or the use of standard symbols). (GMP
    19)

(h) Marks are allocated for knowledge of relevant relationships alone. Do not award a mark when a
    candidate writes down several relationships and does not select the correct one to continue
    with, for example by substituting values. (GMP 1c)

(i) Do not award marks if a ‘magic triangle’, eg , is the only statement in a candidate’s
    response.
                                                       V
    To gain the mark, the correct relationship must be stated eg V = IR or R = . (GMP 2)
                                                        I

(j) In rounding to an expected number of significant figures, award the mark for correct answers
    which have up to two figures more or one figure less than the number in the data with the
    fewest significant figures. (GMP 6)
                                
    (Note: the use of a recurrence dot, eg 0.6, would imply an infinite number of significant figures
    and would therefore not be acceptable.)

                               page 02

PDF page 3

Original 2024 National 5 Physics marking instructions, PDF page 3; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(k) The incorrect spelling of technical terms should usually be ignored and candidates should be
    awarded the relevant mark, provided that answers can be interpreted and understood without
    any doubt as to the meaning.
    Where there is ambiguity, do not award the mark. Two specific examples of this would be when
    the candidate uses a term:
       • that might be interpreted as reflection, refraction or diffraction, eg ‘defraction’
       • that might be interpreted as either fission or fusion, eg ‘fussion’
    The spelling of these words is similar, but the words have totally different meanings. If the
    spelling (or handwriting) in an answer makes it difficult for you to interpret a candidate’s
    intention, then do not award the mark. (GMP 22)

(l) Marks are awarded only for a valid response to the question asked. For example, in response to
    questions that ask candidates to:

    •  identify, name, give, or state, they need only name or present in brief form.
    •  describe, they must provide a statement or structure of characteristics and/or features.
    •  explain, they must relate cause and effect and/or make relationships between things clear.
    •  determine or calculate, they must determine a number from given facts, figures or
       information.

    •  estimate, they must determine an approximate value for something.
    •  justify, they must give reasons to support their suggestions or conclusions, eg this might be
       by identifying an appropriate relationship and the effect of changing variables.
    •  show that, they must use physics (and mathematics) to prove something, eg a given value.
       All steps, including the stated answer, must be shown.
    •  predict, they must suggest what may happen based on available information.

    •  suggest, they must apply their knowledge and understanding of physics to a new situation. A
       number of responses are acceptable: award marks for any suggestions that are supported by
       knowledge and understanding of physics.
    •  use your knowledge of physics or aspect of physics to comment on, they must apply their
       skills, knowledge and understanding to respond appropriately to the problem/situation
       presented, for example by making a statement of principle(s) involved and/or a relationship
       or equation, and applying these to respond to the problem/situation. Candidates are given
       credit for the breadth and/or depth of their conceptual understanding.

                               page 03

PDF page 4

Original 2024 National 5 Physics marking instructions, PDF page 4; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Common issues with candidate responses

When marking National 5 Physics, there are some common issues that arise when considering
candidates’ answers.

There is often a range of acceptable responses which would sensibly answer a particular question.
However, it is often difficult to anticipate all correct or partially correct responses to questions.

The detailed marking instructions contain ideal answers, and examples of other acceptable answers
which offer guidance for interpreting candidates’ responses. They may also contain advice on answers
which are not acceptable, or only attract partial marks.

Units

Do not penalise use of upper/lower case when the abbreviated version is given, as long as it can be
clearly identified, eg DB, sV, hZ, bq.

However, take care to ensure the unit has the correct prefix, eg for an answer t = 0.005 seconds,
t = 5 ms is acceptable but t = 5 Ms is not.

Where a candidate makes multiple unit errors or conversion errors/omissions in any part of a question,
penalise once only. For example, when calculating speed from distance and time, and the answer is
required to be in ms⁻¹.

If  d = 4 km and t = 2 minutes

                       d
                     v=         (1)
                       t
                       4000000
                     v=         (1)
                          2
                     v=2000000  (0)
Although the candidate has made three unit errors, (not correctly converted distance or time and has
omitted the final unit), do not award the final mark only.

Some common units often attract incorrect abbreviations in answers to numerical questions.
When the abbreviation can be confused with a different unit then the final mark cannot be awarded,
eg sec or secs as an abbreviation for seconds is not acceptable.

 Common units and abbreviations
 Acceptable unit and abbreviation unacceptable version
 second, s                       sec, secs
 hours, h                        hr, hrs
 ampere, amp, amps, A, a
 metres per second, m s⁻¹, m/s   mps, m/s⁻¹
 metres per second per second, m s⁻², m/s² m/s/s, mpsps, m/s⁻²
 joules per kilogram per degree celsius,
                                 J/kg/ºC
 J kg⁻¹ ºC⁻¹, J/kg ºC

                               page 04

PDF page 5

Original 2024 National 5 Physics marking instructions, PDF page 5; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Standard form

Where a candidate fails to express an answer in standard form correctly, treat it as an arithmetic
error and do not award the final mark. For example:

For an answer t = 400 000 s, then t = 4×10⁵ s would be correct but t = 4⁵ s would be treated as an
arithmetic error. (GMP 10)

Incorrect answer carried forward (GMP 16)
Do not apply a further penalty where a candidate carries forward an incorrect answer to part of a
question, and uses that incorrect answer correctly:
  •  within that part of the question, eg from (a)(i) to (a)(ii)
  •  or to the next part of the question, eg from (a) to (b).

Similarly, if a candidate has selected the wrong value in a question which requires a data value, then
award full marks in the subsequent answer for a correct response that uses either the candidate’s
wrong value or the correct data value. For example:

(a)  State the speed of microwaves in air.
     Candidate’s answer: 240 m s⁻¹. This answer would attract zero marks.

(b)  Calculate the distance travelled by these microwaves in 0·34 seconds.
     The candidate may use either the value given in part (a) or the correct value for the speed,
     and could gain full marks if correctly completed.

Where an incorrect answer may be carried forward, this is indicated in the additional guidance column
of the detailed marking instructions by the comment ‘or consistent with part...’.

Standard three marker

The examples over the page set out how to apportion marks to answers requiring calculations. These
are the ‘standard three marker’ type of questions.

Award full marks for a correct answer to a numerical question, even if the steps are not shown
explicitly, unless it specifically requires evidence of working to be shown.

For some questions requiring numerical calculations, there may be alternative methods
(eg alternative relationships) that would lead to a correct answer.
Sometimes, a question requires a calculation which does not fit into the ‘standard three marker’ type
of response. In these cases, the detailed marking instructions will contain guidance for marking the
question.

When marking partially correct answers, apportion individual marks as shown over the page.

                               page 05

PDF page 6

Original 2024 National 5 Physics marking instructions, PDF page 6; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Example of a ‘standard three marker’ question

The current in a resistor is 1.5 amperes when the potential difference across it is 7.5 volts.
Calculate the resistance of the resistor. (3 marks)

        Example response Mark and comment

     1. V = IR          1 mark: relationship
        7.5 = 1.5R      1 mark: substitution

        R = 5.0 Ω       1 mark: correct answer

     2. 5.0 Ω           3 marks: correct answer
     3. 5.0             2 marks: unit missing

     4. 4.0 Ω           0 marks: no evidence, wrong answer

     5. __ Ω            0 marks: no working or final answer
     6.    V  7.5
        R =  =   =4.0 Ω 2 marks: arithmetic error
           I  1.5
     7.    V
        R =  =4.0 Ω     1 mark: relationship only
           I
     8.   V
        R= =__Ω         1 mark: relationship only
          I
     9.    V  7.5
        R = =    = __Ω  2 marks: relationship and substitution, no final answer
           I  1.5
    10.   V  7.5
        R=  =   =4.0    2 marks: relationship and substitution, wrong answer
           I 1.5
    11.    V  1.5
        R=  =   =5.0 Ω  1 mark: relationship but wrong substitution
           I  7.5
    12.    V  75
        R=  =   =5.0 Ω  1 mark: relationship but wrong substitution
           I  1.5
    13.    I  1.5
        R=  =   =5.0 Ω  0 marks: wrong relationship
           V  7.5
    14. V = IR
        7.5 = 1.5 × R
        R = 0.2 Ω       2 marks: relationship and substitution, arithmetic error
    15. V = IR

           I  1.5
        R=  =   =0.2 Ω  1 mark: relationship correct but wrong rearrangement of
           V  7.5
                               symbols

                               page 06

PDF page 7

Section 1, Question 1Section 1, Question 2Section 1, Question 3Section 1, Question 4Section 1, Question 5Section 1, Question 6Section 1, Question 7Section 1, Question 8Section 1, Question 9Section 1, Question 10Section 1, Question 11Section 1, Question 12Section 1, Question 13Section 1, Question 14Section 1, Question 15Section 1, Question 16Section 1, Question 17Section 1, Question 18Section 1, Question 19Section 1, Question 20Section 1, Question 21Section 1, Question 22Section 1, Question 23Section 1, Question 24Section 1, Question 25
Original 2024 National 5 Physics marking instructions, PDF page 7; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Marking instructions for each question

Section 1

  Question   Answer      Mark

     1.         E         1

     2.         B         1
     3.         E         1

     4.         B         1

     5.         A         1

     6.         D         1

     7.         C         1
     8.         D         1

     9.         A         1

    10.         B         1

    11.         E         1
    12.         A         1

    13.         B         1

    14.         C         1

    15.         B         1

    16.         D         1
    17.         D         1

    18.         A         1

    19.         C         1

    20.         C         1
    21.         A         1

    22.         B         1

    23.         E         1

    24.         C         1

    25.         B         1

                               page 07

PDF page 8

Section 2, Question 1
Original 2024 National 5 Physics marking instructions, PDF page 8; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Section 2

                                        Max
   Question       Expected response               Additional guidance
                                       mark
1.  (a) (i) Constant acceleration        1  Accept:
                                            uniform acceleration
                                            accelerating at 0.45 m s⁻²
                                            a = 0.45 m s⁻²
                                            Do not accept:
                                            acceleration alone
                                            accelerating alone
                                            increasing speed alone

        (ii) Constant speed              1  Accept:
                                            ‘velocity’ in place of ‘speed’
                                            steady speed
                                            zero acceleration
                                            v = 9.0 m s⁻¹

    (b)        v−u                       3  Accept:
            a=
                                   (1)         ∆v
                t                            a=
               0−9.0                            t
            a=                     (1)
                12
                                            Do not accept a response starting
            a=−0.75 ms⁻²           (1)      with:
                                                       v       u
                                             v=at or a =  or a =
                                                       t       t
                                            Alternative method:
                                            a=gradient (1)
                                               0−9
                                            a=       (1) or other correct points
                                               72−60
                                            a=−0.75 ms⁻² (1)
                                            Accept:
                                            −0.8
                                            −0.750
                                            −0.7500
    (c)     d =area under graph    (1)   3  If incorrect substitution then MAX (1)
                                   (1)      for (implied) relationship
            d
              =( ₂¹×20×9)+(40×9)+(₂¹×12×9)
                                   (1)
                                            Any attempt to use s =vt or d =vt
            d =504 m
                                            applied to the whole graph is wrong
                                            physics, award (0) marks.
                                            If s =vt or d =vt is used for each
                                            section of the graph and the results
                                            added to give the correct total
                                            distance then full marks can be
                                            awarded.
                                            Accept:
                                            500
                                            504.0
                               page 08

PDF page 9

Section 2, Question 2
Original 2024 National 5 Physics marking instructions, PDF page 9; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
2.  (a)  (i) Using Pythagoras:          2   Ignore any direction stated in
         (A)                                the final answer in this part.
            resultant² = 25² + 12² (1)
            resultant = 28 N       (1)      No requirement for arrows to be
                                            shown on diagram to calculate the
                                            magnitude of the resultant force.
            Using scale diagram:
                                            Regardless of method, if a candidate
                                            shows a vector diagram (or a
                                            representation of a vector diagram,
                                            eg a triangle with no arrows) and the
                                            vectors have been represented
                                            incorrectly, eg head-to-head then
            vectors to scale       (1)      MAX (1).
            resultant = 28 N       (1)
                                            Unless candidate reverts to a correct
            (allow ±0.5 N tolerance)
                                            vector diagram, if heads of the
                                            arrows are connected on the
                                            diagram provided in the question
                                            then MAX (1)
                                            Accept:
                                            30
                                            27.7
                                            27.73

                               page 09

PDF page 10

Original 2024 National 5 Physics marking instructions, PDF page 10; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
2.  (a)  (i) Using trigonometry:        2   Regardless of method, if a candidate
         (B)                                (re)draws a vector diagram (or a
                 12
            tanθ=                  (1)      representation of a vector diagram
                  25                        eg a triangle with no arrows) in this
            (θ=26º)                         part and the vectors have been
                                            represented incorrectly, eg head-to-
            direction = 116        (1)
                                            head then MAX (1)
                                            Unless candidate reverts to a correct
                                            vector diagram, if heads of the
                                            arrows are connected on the
                                            diagram provided in the question
            Using scale diagram:            then MAX (1)
                                            Alternative methods:
                                                  25
                                             tanθ=              (1)
                                                  12
                                            (θ=64º)
                                            direction = 116     (1)
            vectors to scale       (1)
                                            OR
            direction = 116        (1)
            (allow ±2º tolerance)           Use of resultant value (and
                                            appropriate trigonometry) consistent
                                            with (a)(i)(A), eg
                                                  12        25
                                             cosθ=   or sinθ=
                                                  28        28
                                            Ignore the degree symbol if the
                                            direction is stated as a bearing.
                                            Accept:
                                            26º South of East
                                            64º East of South
                                            Can obtain first mark for scale
                                            diagram method from suitable
                                            diagram in part (a)(i)(A) if not drawn
                                            in this part. However, the candidate
                                            must attempt an answer in this part.
                                            Ignore any magnitude stated in the
                                            final answer in this part.
                                            Do not accept incorrect statements
                                            of trig functions at substitution
                                            stage, eg
                                                12
                                             tan =
                                                25
                                            Accept:
                                            30º S of E  120
                                            25.6º S of E 115.6
                                            25.64º S of E 115.64

                               page 10

PDF page 11

Original 2024 National 5 Physics marking instructions, PDF page 11; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
2.  (a) (ii) F =ma                 (1)  3   Or consistent with (a)(i)(A) and/or
                                            (a)(i)(B)
            28=75×a                (1)
             a =0.37 ms⁻² at 116   (1)      Direction required for final mark.
                                            Accept:
                                            0.4
                                            0.373
                                            0.3733

    (b)     adopt a streamlined position 1  Or any other suitable suggestion.
            OR
                                            Ignore any reference to reduction of
            cycle behind another triathlete mass or weight.
            OR
                                            Do not accept anything to do with
            wear tight clothing/lycra       the road surface/course.
            OR
                                            Do not accept:
            solid wheels instead of spokes  ‘streamlining’ alone
                                            ‘more aerodynamic’ alone
                                            no friction/no air resistance

                                            Apply +/- rule for surplus answers.
    (c) (i)        d =vt           (1)  3   Bar not required above v

            4×2.5×10³ =v×(38×60)   (1)
                                            Accept division of time by 4 rather
                   v =4.4 ms⁻¹     (1)      than multiplication of distance by 4.
                                            Accept:
                                            4
                                            4.39
                                            4.386

                                            Accept use of other units of speed
                                            (eg km h⁻¹)

        (ii) 0 (m s⁻¹)                  1   Units not required, but if included
                                            must be a unit of velocity.

                               page 11

PDF page 12

Section 2, Question 3
Original 2024 National 5 Physics marking instructions, PDF page 12; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question       Expected response               Additional guidance
                                      mark
3. (a) (i)      Eₖ = ₂¹mv²        (1)   4  Accept:
                                           1000
           initial Eₖ = ₂¹×65×7.0² (1)
                  (=1592.5J)

            final Eₖ = ₂¹×65×3.0² (1)

                  (=292.5J)

               (∆Eₖ =1592.5−292.5)
               ∆Eₖ =1300J         (1)

       (ii)  E_{w} = Fd           (1)   3  Or consistent with (a)(i)

           1300= F×2.0            (1)
                                           Accept:
              F =650 N            (1)      700
                                           650.0
   (b)     C orrect curved path shown.  1  Do not accept indication of curve
                                           rising above horizontal.

                              page 12

PDF page 13

Section 2, Question 4
Original 2024 National 5 Physics marking instructions, PDF page 13; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question       Expected response               Additional guidance
                                      mark
4. (a)     W =mg                  (1)  3   Accept:
                                           90
           W =67×1.4              (1)
                                           93.8
           W =94 N                (1)      93.80
   (b)     exposure to radiation       1   Accept any other physics-related
                                           challenge.
           OR
           pressure differential           Ignore non-physics-related
                                           challenges, eg ‘lack of air/oxygen’,
           OR
                                           ‘lack of food/water’,
           lower gravitational field strength
                                           Apply +/- rule for surplus answers.
           OR
           extreme temperatures            Accept:
                                           Different gravitational field strength
                                           ‘g’ for ‘gravitational field strength’
                                           Do not accept:
                                           ‘gravity’ in place of ‘gravitational
                                           field strength’.

   (c)     Acceleration increases (1)  3   MUST JUSTIFY

           Justification:                  Ignore any reference to air
                                           resistance/friction.
           mass decreases (as fuel is used)
           OR
           gravitational field strength
           decreases (with altitude) (1)

           weight decreases
           OR
           unbalanced force increases (1)

                              page 13

PDF page 14

Section 2, Question 5
Original 2024 National 5 Physics marking instructions, PDF page 14; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question       Expected response               Additional guidance
                                      mark
5.         Award 3 marks where the candidate 3 Candidates may use a variety of
           has demonstrated a good         physics arguments to answer this
           understanding of the physics    question.
           involved. They show a good
           comprehension of the physics of the Award marks based on candidates
           situation and provide a logically demonstrating overall good,
           correct answer to the question  reasonable, limited, or no
           posed. This type of response might understanding.
           include a statement of the principles
           involved, a relationship or an
           equation, and the application of
           these to respond to the problem.
           The answer does not need to be
           ‘excellent’ or ‘complete’ for the
           candidate to gain full marks.
           Award 2 marks where the candidate
           has demonstrated a reasonable
           understanding of the physics
           involved. They make some
           statement(s) that are relevant to the
           situation, showing that they have
           understood the problem.
           Award 1 mark where the candidate
           has demonstrated a limited
           understanding of the physics
           involved. They make some
           statement(s) that are relevant to the
           situation, showing that they have
           understood at least a little of the
           physics within the problem.
           Award 0 marks where the candidate
           has not demonstrated an
           understanding of the physics
           involved. There is no evidence that
           they have recognised the area of
           physics involved, or they have not
           given any statement of a relevant
           physics principle. Award this mark
           also if the candidate merely restates
           the physics given in the question.

                              page 14

PDF page 15

Section 2, Question 6
Original 2024 National 5 Physics marking instructions, PDF page 15; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question       Expected response               Additional guidance
                                      mark
6. (a)     not affected by weather     1   Accept any other reasonable answer.
           OR
                                           Accept:
           no (distortion from) atmosphere ‘to see further’
                                           converse arguments describing
           OR
                                           disadvantages of Earth-based
           no light pollution              telescopes
           OR
                                           Do not accept:
           can use telescope during the day ‘clearer’ alone
                                           ‘closer’
           OR
                                           (neither would negate a correct
           full range of EM waves can be   response)
           observed
                                           Apply +/- rule for surplus answers
   (b) (i) A planet outside the Solar System. 1 Accept: ‘a planet that orbits a star
                                           other than the Sun’
       (ii) d =vt                 (1)  3   This is not a Standard Three Marker.
           d =3.0×10⁸                      Calculation can be carried out in
                                           steps, but all steps must be done for
              ×(41×365.25×24×60×60) (1)
                                           the substitution mark to be
           d =3.9×10¹⁷(m)         (1)      awarded, eg calculation of distance
                                           for one light-year, followed by
                                           multiplying this by 41.
                                           Unit in final answer not required,
                                           but if stated, must be correct.
                                           Accept:
                                           4 × 10¹⁷
                                           3.88 × 10¹⁷
                                           3.882 × 10¹⁷

                                           Also accept, if using 365 days:
                                           3.879 × 10¹⁷

   (c)     helium and nitrogen         1   Must have both
                                           Any additional elements (0) marks.

                                           Accept correct chemical symbols.
                                           Accept clear indication of elements
                                           present on diagram

                              page 15

PDF page 16

Section 2, Question 7
Original 2024 National 5 Physics marking instructions, PDF page 16; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question       Expected response               Additional guidance
                                      mark
7.  (a)    Electrons move in one direction 1 Accept:
           (only).                         ‘they’ or ‘(negative) charges’ in
                                           place of ‘electrons’
                                           Do not accept:
                                           ‘current’ in place of ‘electrons’

    (b)    Q= It                  (1)  3   Accept:
           Q=2.5×(1.5×60×60)      (1)
                                           10 000
                                           13 500
           Q=14000 C              (1)
    (c)    (As the temperature increases) the 3 Independent marks
           voltage across the thermistor
           decreases              (1)      Accept: ‘transistor’ in place of
                                           MOSFET
           Voltage across the resistor increases
                                  (1)      Do not accept: npn transistor or pnp
                                           transistor in place of MOSFET
           MOSFET turns on        (1)
                                           Accept: MOSFET conducts
                                           Ignore any value for switching
                                           voltage stated.

                              page 16

PDF page 17

Original 2024 National 5 Physics marking instructions, PDF page 17; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
7.   (d)     V =5.0−2.2            (1)   4  If no attempt to calculate voltage
                                            across resistor then MAX (1).
             (V =2.8 V)
                                            If clear arithmetic error in
             V = IR                (1)      calculation of voltage then MAX (3)
            2.8=18×10⁻³×R          (1)      Alternative method 1:
              R=160 Ω              (1)        V_{S} =IR_{T} (1)

                                              5.0=18×10⁻³×R_{T}
                                             (R_{T} =277.8 Ω)

                                             V_{L}_{E}_{D} =IR_{L}_{E}_{D}
                                              2.2=18×10⁻³×R_{L}_{E}_{D} (1) all substitutions
                                            (R_{L}_{E}_{D} =122.2 Ω)

                                              (R=R_{T} −R_{L}_{E}_{D})
                                              R=277.8−122.2 (1)
                                              R=160 Ω     (1)
                                            For this method, if no attempt to
                                            determine resistance of resistor,
                                            MAX (1) for Ohm’s law relationship

                                            Alternative method 2:
                                             V_{S} =IR_{T}
                                             5.0=18×10⁻³×R_{T}

                                            (R_{T} =277.8 Ω)

                                             V₁ R₁
                                               =        (1) both relationships
                                             V₂ R₂
                                             2.2 R₁
                                               =        (1) all substitutions
                                             5.0 277.8
                                             (R₁=122.2 Ω)
                                             (R=R_{T} −R_{L}_{E}_{D})
                                              R=277.8−122.2 (1)
                                              R=160 Ω   (1)
                                            For this method, if no attempt to
                                            determine resistance of resistor,
                                            MAX (1) for both relationships
                                            Accept:
                                            200
                                            156
                                            155.6

                               page 17

PDF page 18

Section 2, Question 8
Original 2024 National 5 Physics marking instructions, PDF page 18; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question       Expected response               Additional guidance
                                      mark
8. (a) (i) Suitable scales, labels, and units (1) 3 A non-linear scale on either axis
                                           prevents access to any marks (0).
           All points plotted correctly to ± half
                                           Allow broken axes from origin (with
           a division             (1)
                                           or without symbol), but scale must
                                           be linear across data range.
           Best fit curve         (1)
                                           Axes can be transposed.
                                           A bar chart/histogram can obtain
                                           MAX (1) for scales, labels, and units.
       (ii) 6.6 V                      1   Must be consistent with the
                                           curve/line the candidate has drawn.
                                           If the candidate has used a nonlinear
                                           scale in (a)(i) this mark cannot be
                                           accessed.
                                           If the candidate has not shown a line
                                           in (a)(i) this mark cannot be
                                           accessed.
                                           If the candidate has shown multiple
                                           lines at this point in (a)(i) this mark
                                           cannot be accessed.

                                           ± half a division tolerance
                                           Unit must be stated.

       (iii) (The student) varied the resistance 1 Any reference to altering power
           of the variable resistor        supply (0) marks.

                                           Accept:
                                           ‘change the setting of the variable
                                           resistor’
                                           ‘change the reading on the variable
                                           resistor’

                                           Do not accept:
                                           ‘change the value of the variable
                                           resistor’ alone

   (b)                                 1   Ignore any numerical values.

                                           Accept:
                                           Any passably straight line that would
                                           extrapolate through the origin.

                              page 18

PDF page 19

Section 2, Question 9
Original 2024 National 5 Physics marking instructions, PDF page 19; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question       Expected response               Additional guidance
                                      mark
9. (a) (i)  Eₕ =cm∆T              (1)  3   Accept:
                                           8000
            Eₕ =4180×0.020×(100−6.3) (1)
                                           7830
            Eₕ =7800 J            (1)      7833
       (ii) Eₕ =ml                (1)  3   Accept:
                                           30 000
            Eₕ =0.014× 22.6×10⁵   (1)
                                           31 600
            Eₕ =32000 J           (1)      31 640
       (iii) 39 800 J                  1   Or consistent with (a)(i) and (a)(ii)
   (b) (i)      E                      3   Accept:
             P=                   (1)
                                           100 000
                t
                                           135 000
                 E
           750=
                                  (1)
                180
             E =140000 J          (1)
       (ii) Heat loss to the surroundings. 1 Do not accept ‘heat loss’ alone
           OR
                                           Accept:
           Not all the energy used by the  Some energy is used to turn the
           microwave is transferred to the turntable in the microwave
           water.                          Some energy is converted to sound.

                              page 19

PDF page 20

Section 2, Question 10
Original 2024 National 5 Physics marking instructions, PDF page 20; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question       Expected response               Additional guidance
                                      mark
10. (a) (i)  p₁ p₂                     3   If clear arithmetic error is shown in
               =                  (1)
                                           conversion of temperature to kelvin
             T₁ T₂
                                           then MAX (2) marks
            655  p₂
               =                  (1)
                                           Accept:
            294 287
                                           640
             p₂ =639 kPa          (1)
                                           639.4
                                           639.40
       (ii) (As the temperature decreases) the 3 Independent marks
           kinetic energy of the particles
           decreases/particles move slower (1) Accept: ‘atoms’/‘molecules’ in
                                           place of ‘particles’.
           Particles collide with the walls of
                                           Do not accept: ‘particles hit the
           the container less frequently/often
                                           walls of the container less’ alone.
           OR
           Particles collide with the walls of
           the container with less force (1)
           Pressure decreases     (1)
   (b)        F                   (1)  4   (1) mark for each relationship
            p=
              A                            (1) mark for all substitutions
                                           (1) mark for final answer
           1.02×10⁶ =
                     F
                  7.5 × 10⁻⁴
                                           Do not accept F =ma in place of
                                                              F
           W =mg                  (1)      W =mg, ie MAX (1) for p=
                                                              A
           1.02×10⁶×7.5 × 10⁻⁴ =m×9.8 (1)
           m=78 kg                (1)      Accept:
                                           80
                                           78.1
                                           78.06

                              page 20

PDF page 21

Section 2, Question 11
Original 2024 National 5 Physics marking instructions, PDF page 21; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question       Expected response               Additional guidance
                                      mark
11. (a)    (Particle) vibrations/oscillations are 1 Accept:
           at 90°/right angles/perpendicular to ‘particles move up and down’ to
           the direction of energy transfer. indicate a vibration.
                                           ‘disturbance’ as an indication of
           OR
                                           vibration/oscillation
           (Particle) vibrations/oscillations are
           at 90°/right angles/perpendicular to Do not accept:
           the direction the wave is travelling. ‘particles move perpendicular…’
   (b) (i)      1                      3            N
             T =                  (1)      Accept: f =
                f                                    t
                1
           7.4 =                  (1)      Accept:
                f
                                           0.1
             f =0.14 Hz           (1)      0.135
                                           0.1351
       (ii) measure (the time for) more waves 1 Do not accept answers relating to
           to pass                         precision eg a stopclock with
                                           more decimal places.
           OR
           count the number of waves in a
           longer period of time
           OR
           repeat (the measurement) and
           average

   (c)     480 kW                      1

   (d)     diffraction of waves into right 2 (0 marks) if no evidence of
           ‘shadow’ region of the harbour wall diffraction in shadow region (ie no
                                  (1)      curved sections), second mark is
                                           dependent on first mark.
           consistent wavelengths before and
           after the harbour wall (1)      (0 marks) if diagram represents
                                           diffraction through a gap (ie curved
                                           sections at top)

                                           Minimum of two waves for any marks
                                           to be awarded.

                              page 21

PDF page 22

Section 2, Question 12
Original 2024 National 5 Physics marking instructions, PDF page 22; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
12. (a)     The speed of sound (in air) 1   Any extra additional information
                                            stated by the candidate would
                                            negate a correct response.
    (b) (i) Ray of light is incident at 90°/right 1 Accept:
            angles/perpendicular to the lens the angle of incidence is 0°
                                            the ray is at 0°to the normal
            OR
            Ray of light is travelling along the Any mention of the ray not
            normal                          refracting then (0 marks)

        (ii) equal to                   1   Accept ‘the same’

    (c)     (The amplitude of the second bang 2 MUST JUSTIFY
            is) less than (the amplitude of the
            first bang.)           (1)      Accept: ‘quieter’ in place of less
                                            amplitude
            (The reflected sound has travelled
            further so) the second bang has less Accept for justification: energy is
            energy than the first bang      lost on reflection
                                   (1)

                               page 22

PDF page 23

Section 2, Question 13
Original 2024 National 5 Physics marking instructions, PDF page 23; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question        Expected response               Additional guidance
                                       mark
13.         Award 3 marks where the candidate 3 Candidates may use a variety of
            has demonstrated a good         physics arguments to answer this
            understanding of the physics    question.
            involved. They show a good
            comprehension of the physics of the Award marks based on candidates
            situation and provide a logically demonstrating overall good,
            correct answer to the question  reasonable, limited, or no
            posed. This type of response might understanding.
            include a statement of the principles
            involved, a relationship or an
            equation, and the application of
            these to respond to the problem.
            The answer does not need to be
            ‘excellent’ or ‘complete’ for the
            candidate to gain full marks.
            Award 2 marks where the candidate
            has demonstrated a reasonable
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood the problem.
            Award 1 mark where the candidate
            has demonstrated a limited
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood at least a little of the
            physics within the problem.
            Award 0 marks where the candidate
            has not demonstrated an
            understanding of the physics
            involved. There is no evidence that
            they have recognised the area of
            physics involved, or they have not
            given any statement of a relevant
            physics principle. Award this mark
            also if the candidate merely restates
            the physics given in the question.

                              page 23

PDF page 24

Section 2, Question 14
Original 2024 National 5 Physics marking instructions, PDF page 24; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question       Expected response               Additional guidance
                                      mark
14. (a)    21.2                       3
                =4half-lives    (1)
            5.3 
           Any evidence of halving activity (1)

           (848 000424 000212 000
           106 00053 000)

           final activity = 53 000 GBq (1)

   (b) (i) 25×10³                     1  Unit not required, but, if stated,
                 =50000 (s)              must be seconds.
            0.50 
       (ii)        E                    3  Accept:
                D=                (1)
                                           60
                   m
                                           55.0
                     E
           25×10³ =               (1)      55.00
                   2.2×10⁻³
                E =55 J           (1)

                              page 24

PDF page 25

Section 2, Question 15
Original 2024 National 5 Physics marking instructions, PDF page 25; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
15. (a)     less energy/power from the Sun (is 1 Accept:
            available at greater distance from In case the spacecraft is in the shade
            the Sun)                        of/behind planets/moons
            OR
                                            Do not accept:
            less light from the Sun (is available ‘it is too far away’ alone
            at greater distance from the Sun)
                                            Do not accept:
            OR
                                            indication that there is no light
            would need a (very) large area of (from the Sun)
            cells (to generate the same amount
            of power)                       Do not accept:
                                            responses in terms of light from stars
    (b)     (plutonium/large) nucleus splits 1 Do not accept: ‘atom’, ‘molecule’ or
            (into smaller nuclei)           ‘particle’ in place of ‘nucleus’
    (c)     The neutrons released from one 2 Independent marks
            reaction (1)
                                            Do not accept: ‘atoms’, ‘molecules’
            go on to split other nuclei/cause or ‘particles’ in place of ‘nuclei’
            further fissions (1)
    (d)     The activity (of plutonium) 1   Do not accept:
            decreases (with time)           ‘radioactivity’ in place of ‘activity’

                       [END OF MARKING INSTRUCTIONS]

                               page 25