2025 Higher Physics - Paper 2 marking instructions

Source: Scottish Qualifications Authority (SQA) / Qualifications Scotland. This is a StemInteract HTML companion, not an official HTML edition. Selectable text is supplied alongside original page images. Use the images or original PDF for equations, powers, fractions, vector notation, tables and diagrams; text extraction cannot fully preserve mathematical layout.

Jump to a question

PDF page 1

Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 1; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
National
                  Qualifications

                  2025

                            2025  Physics

                          Higher   Paper  2

         Question   Paper  Finalised  Marking   Instructions

© Scottish Qualifications Authority 2025

These marking instructions have been prepared by examination teams for use by SQA appointed
markers when marking external course assessments.

The information in this document may be reproduced in support of SQA qualifications only on a non-
commercial basis. If it is reproduced, SQA must be clearly acknowledged as the source. If it is to be
reproduced for any other purpose, written permission must be obtained from permissions@sqa.org.uk.

PDF page 2

Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 2; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
General marking principles for Physics Higher

This information is provided to help you understand the general principles you must apply when
marking candidate responses to questions in this paper. These principles must be read in conjunction
with the detailed marking instructions, which identify the key features required in candidate
responses.

(a) Marks for each candidate response must always be assigned in line with these marking principles,
    the Physics: general marking principles (GMPs) (Physics: general marking principles - National 3
    to Advanced Higher (sqa.org.uk)) and the detailed marking instructions for this assessment.

(b) Marking should always be positive. This means that, for each candidate response, marks are
    accumulated for the demonstration of relevant skills, knowledge and understanding: they are
    not deducted from a maximum on the basis of errors or omissions.

(c) If a specific candidate response does not seem to be covered by either the principles or detailed
    marking instructions, and you are uncertain how to assess it, you must seek guidance from your
    team leader.

(d) Where a candidate answers part of a question incorrectly and carries the incorrect answer
    forward in the following part, award marks if the incorrect answer has then been used correctly
    in the subsequent part or ‘follow-on’. (GMP 16)

(e) Award marks for non-standard symbols where the symbols are defined and the relationship is
    correct, or where the substitution shows that the relationship used is correct. This must be clear
    and unambiguous. (GMP 20)

(f) Award full marks for a correct final answer (including units if required) on its own, unless a
    numerical question specifically requires evidence of working to be shown, eg in a ‘show’
    question. (GMP 1)

(g) Award marks where a diagram or sketch conveys correctly the response required by the
    question. It will usually require clear and correct labels (or the use of standard symbols). (GMP
    19)

(h) Marks are allocated for knowledge of relevant relationships alone. Do not award a mark when a
    candidate writes down several relationships and does not select the correct one to continue
    with, for example by substituting values. (GMP 1c)

(i) Do not award marks if a ‘magic triangle’ (eg) is the only statement in a candidate’s

    response. To gain the mark, the correct relationship must be stated, for example V = IR or
       V
    R =  . (GMP 2)
       I
(j) In rounding to an expected number of significant figures, award the mark for responses that have
    up to two figures more or one figure less than the number in the data with the fewest significant
    figures. (GMP 6)
    (Note: the use of a recurrence dot, eg 0.6, would imply an infinite number of significant figures
    and would therefore not be acceptable.)

                                page 02

PDF page 3

Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 3; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(k) The incorrect spelling of technical terms should usually be ignored and candidates should be

    awarded the relevant mark, provided that answers can be interpreted and understood without
    any doubt as to the meaning.
    Where there is ambiguity, do not award the mark. Two specific examples of this would be when
    the candidate uses a term:

     • that might be interpreted as reflection, refraction or diffraction, eg ‘defraction’
     • that might be interpreted as either fission or fusion, eg ‘fussion’

    The spelling of these words is similar, but the words have totally different meanings. If the
    spelling (or handwriting) in an answer makes it difficult for you to interpret a candidate’s
    intention, then do not award the mark. (GMP 22)

(l) Marks are awarded only for a valid response to the question asked. For example, in response to
    questions that ask candidates to:
    • identify, name, give, or state, they need only name or present in brief form.

    • describe, they must provide a statement or structure of characteristics and/or features.
    • explain, they must relate cause and effect and/or make relationships between things clear.

    • determine or calculate, they must determine a number from given facts, figures or
      information.
    • estimate, they must determine an approximate value for something.

    • justify, they must give reasons to support their suggestions or conclusions. For example this
      might be by identifying an appropriate relationship and the effect of changing variables.
    • show that, they must use physics [and mathematics] to prove something, for example a given
      value – all steps, including the stated answer, must be shown.

    • predict, they must suggest what may happen based on available information.
    • suggest, they must apply their knowledge and understanding of physics to a new situation. A
      number of responses are acceptable: award marks for any suggestions that are supported by
      knowledge and understanding of physics.

    • use their knowledge of physics or aspect of physics to comment on, they must apply their
      skills, knowledge and understanding to respond appropriately to the problem/
      situation presented (for example by making a statement of principle(s) involved and/or a
      relationship or equation, and applying these to respond to the problem/situation). Candidates
      are given credit for the breadth and/or depth of their conceptual understanding.

Standard three marker
The examples over the page set out how to apportion marks to answers requiring calculations. These
are the ‘standard three marker’ type of questions.
Award full marks for a correct answer to a numerical question, even if the steps are not shown
explicitly, unless it specifically requires evidence of working to be shown.
For some questions requiring numerical calculations, there may be alternative methods
(eg alternative relationships) that would lead to a correct answer.

Sometimes, a question requires a calculation that does not fit into the ‘standard three marker’ type of
response. In these cases, the detailed marking instructions will contain guidance for marking the
question.
When marking partially correct answers, apportion individual marks as shown over the page.

                                page 03

PDF page 4

Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 4; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(l) Marking in calculations

    Example question
    The current in a resistor is 1·5 amperes when the potential difference across it is 7·5 volts.
    Calculate the resistance of the resistor. (3 marks)

       Example response Mark and comment

     1. V = IR          1 mark: relationship
       7.5 = 1.5R       1 mark: substitution

       R = 5.0 Ω        1 mark: correct answer

     2. 5.0 Ω           3 marks: correct answer
     3. 5.0             2 marks: unit missing

     4. 4.0 Ω           0 marks: no evidence, wrong answer

     5. __ Ω            0 marks: no working or final answer
     6.    V  7.5
        R = =    =4.0 Ω 2 marks: arithmetic error
           I  1.5
     7.    V
        R = =4.0 Ω      1 mark: relationship only
           I
     8.   V
        R= =__Ω         1 mark: relationship only
          I
     9.    V  7.5
        R = =    = __Ω  2 marks: relationship and substitution, no final answer
           I  1.5
    10.   V  7.5
        R=  =   =4.0    2 marks: relationship and substitution, wrong answer
           I 1.5
    11.   V   1.5
        R=  =   =5.0 Ω  1 mark: relationship but wrong substitution
           I  7.5
    12.   V   75
        R=  =   =5.0 Ω  1 mark: relationship but wrong substitution
           I 1.5
    13.    I  1.5
        R=  =   =5.0 Ω  0 marks: wrong relationship
          V   7.5
    14. V = IR
       7.5 = 1.5 × R
       R = 0.2 Ω        2 marks: relationship and substitution, arithmetic error
    15. V = IR
           I  1.5
        R=  =   =0.2 Ω  1 mark: relationship correct but wrong rearrangement of
          V   7.5
                               symbols

                                page 04

PDF page 5

Paper 2, Question 1
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 5; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Marking instructions for each question

                                        Max
   Question       Expected response               Additional guidance
                                       mark
1.  (a) (i) The velocity increases by 1.45 m s⁻¹ 1 Accept:
            every second                    Speed increases by 1.45 m s⁻¹ every
                                            second.

                                            Velocity/speed changes by 1.45 m s⁻¹
                                            every second.

                                            Rate of change of velocity/speed is
                                            1.45 m s⁻¹ every second.
        (ii) v² =u² +2as           (1)   3  Accept: 27, 27.07, 27.069

            8.86² =0² +(2×1.45×s)  (1)
                                            Alternative methods using two
             s=27.1 m              (1)      relationships:
                                            1 mark for both relationships.
                                            1 mark for both substitutions.
                                            1 mark for final answer.

                                page 05

PDF page 6

Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 6; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
1.   (b)    (W =mg)                      4  Accept: 400, 365, 365.3
            W =31×9.8               (1)
                                            1 mark for quartering
                                            mass/weight/tension/force
            Each cable supports             anywhere.
             31×9.8
                                    (1)
              4
                                            Alternative methods:
                   31×9.8
            Tsin12=                 (1)     Each cable supports
                     4
                                             31
            T =370 N                (1)                          (1)
                                             4
                                            (W =mg)
                                                31
                                            W =   ×9.8           (1)
                                                4
                                                   31
                                            Tsin12=  ×9.8        (1)
                                                    4
                                            T =370 N             (1)
                                            OR
                                            (W =mg)
                                            W =31×9.8            (1)
                                            Tsin12=31×9.8        (1)
                                               31×9.8
                                             T =
                                                    
                                                sin12 
                                             Tension in each cable
                                             31×9.8
                                                  
                                              sin12 
                                                                 (1)
                                                4
                                            T =370 N             (1)
                                            Accept methods using cos78
                                            Do not accept:
                                             F =ma

                                             F =mgsinθ
                                            Max 1 mark for quartering.

                                page 06

PDF page 7

Paper 2, Question 2
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 7; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
2.  (a)     Total momentum before (a collision) 1 Do not accept: TMB = TMA.
            is equal to the total momentum
            after (a collision) in the absence of ‘An isolated system’ is equivalent to
            external forces.                the absence of external forces.
    (b)     (total momentum before = total momentum after) 3 Accept 0.8, 0.830, 0.8300
            m_{P}u_{P}+m_{Q}u_{Q}=m_{P}v_{P}+m_{Q}v_{Q} (1)
            (0.18×1.20)+(0.24×−0.64)=(0.18×−0.76)+(0.24×v_{Q}) (1) Equating the total momenta before

            v_{Q}=0.83 ms⁻¹         (1)     and after.            (1)
                                            All substitutions.    (1)
                                            Final answer.         (1)

                                            If a direction is stated it must be ‘to
                                            the right’ otherwise MAX 2 marks.

    (c)        1                         4  Or consistent with (b).
            Eₖ = mv²
               2
                                            1 mark for relationship anywhere.
            before
                                            1 mark for all substitutions.
            Eₖ _{b}ₑ_{f}ₒᵣ ₑ =   2 1 ×0.18×1.20²    +   2 1 ×0.24×0.64²    1 E n m er a g r i k e s fo . r both total kinetic
            Eₖ ₑ =0.18 J
              _{b}ₑ_{f}ₒᵣ                   1 mark for correct final statement.
            after                           Suspend significant figure rule for
                 1        1             calculated values of total kinetic
            Eₖ
              ₐ_{f}ₜₑᵣ
                =
                 2
                  ×0.18×0.76²
                          
                           +
                            2
                             ×0.24×0.83²
                                           energies in this question.
            Eₖ
              ₐ_{f}ₜₑᵣ
                =0.13 J
            The collision is inelastic.     Final statement mark only available
                                            if calculation for total Eₖ is
                                            attempted.

                                page 07

PDF page 8

Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 8; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
2.  (d) (i)        v                   3  Accept: 1.6, 1.602, 1.6019
             fₒ = fₛ              (1)
                   v±vₛ
                      
                                                         v  
                       3.40×10²           Accept: fₒ = fₛ 
            849=845×             (1)                  v−vₛ 
                      3.40×10² −vₛ
                                
            vₛ =1.60 ms⁻¹          (1)
        (ii) Statement that there are more 1 Look for reference to wavefronts/
            wavefronts per second (arriving at wavelengths/waves/crests first,
            the microphone).                otherwise 0 marks.
            OR
                                            The wavefronts in front of the
            The wavefronts (arriving at the
                                            vehicle/buzzer are closer together.
            microphone) are closer together.
            OR
                                            Do not accept:
            Diagram showing wavefronts closer
                                            Any answer that implies that the
            together ahead of the vehicle and
                                            frequency/wavelength of the sound
            further apart behind it.
                                            produced by the buzzer itself is
                                            changing.
            Or any similar response.
                                            OR
                                            wavelengths are decreasing on its
                                            own.
        (iii) Move the vehicle/buzzer with a 1 Do not accept:
            greater speed (towards the student). Moving the microphone.
            OR                              OR
                                            Changing the frequency of the
            Student stands at the middle of the
                                            buzzer.
            air track (so the vehicle passes the
            student).
                                            OR
                                            Visual interpretations e.g. use
                                            computer software.

                                page 08

PDF page 9

Paper 2, Question 3
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 9; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
3.          Award 3 marks where the candidate 3 Candidates may use a variety of
            has demonstrated a good         physics arguments to answer this
            understanding of the physics    question.
            involved. They show a good      Award marks based on candidates
            comprehension of the physics of the demonstrating overall good,
            situation and provide a logically reasonable, limited, or no
            correct answer to the question  understanding.
            posed. This type of response might
            include a statement of the principles
            involved, a relationship or an
            equation, and the application of
            these to respond to the problem.
            The answer does not need to be
            ‘excellent’ or ‘complete’ for the
            candidate to gain full marks.
            Award 2 marks where the candidate
            has demonstrated a reasonable
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood the problem.

            Award 1 mark where the candidate
            has demonstrated a limited
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood at least a little of the
            physics within the problem.

            Award 0 marks where the candidate
            has not demonstrated an
            understanding of the physics
            involved. There is no evidence that
            they have recognised the area of
            physics involved, or they have not
            given any statement of a relevant
            physics principle. Award this mark
            also if the candidate merely restates
            the physics given in the question.

                                page 09

PDF page 10

Paper 2, Question 4
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 10; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
4.  (a)     Time dilation                1
    (b)           t                      3  Accept: 380, 379.3, 379.25
            t′=                     (1)
                  v²
                1−
                   
                  c                       Accept:
                                                  245
                    245                     t′=
            t′=                     (1)
                                                  2.29²
                  2.29×10⁸ ²                  1−
                                                      
                1−                              3.00
                   3.00×10⁸
                        
            t′=379 s                (1)
    (c)     The student is incorrect. (1) 2 JUSTIFY
            The train does not travel at    Accept:
            relativistic speeds.   (1)      Time dilation is negligible/
                                            insignificant.
                                            OR
                                            No time dilation takes place.
                                            Accept:
                                            The train is not travelling at a speed
                                            close to the speed of light.
                                            The effects of special relativity only
                                            become significant when the speed
                                            ≥ 0.1c. The train will not reach
                                            speeds of this magnitude.

                                            Can be justified by calculation.

                                            Allow for responses that identify
                                            that time dilation does take place
                                            but is insignificant, so statement is
                                            correct in one aspect.

                                page 10

PDF page 11

Paper 2, Question 5
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 11; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
5.  (a)     210000                     2  Accept:
            
             2290
                   
                   
                    =92             (1)
                                             2.1×10⁵ 
                                                    =92
                                            
                                             2.29×10³
                                                     
                                            OR
                                            10⁵ 
                                               =10²              (1)
            (Surface temperature of Star 2 is) 2  10³ 
            (orders of magnitude) greater.
            OR                              Accept:
                                            ‘2 greater’ on its own. (2)
            Surface temperature of Star 1 is
            2 orders of magnitude smaller. (1) Do not accept:
                                            ‘2 times greater’ on its own. (0)
                                            Care should be taken where
                                            candidates answer by the reciprocal
                                            method – 2 marks are still available.
                                             2.29×10³ 
                                                    =0.011       (1)
                                              2.1×10⁵
                                                    
                                            Comparison statement.   (1)
    (b) (i)                              2  Peak wavelength less.   (1)

                                            Line added should always be above
                                            original line.         (1)

        (ii) Lower (surface) temperature. 1 Accept:
                                            Less hot or cooler.
            OR

            (The radiation from star 1)     Accept:
            has a longer peak wavelength    A peak wavelength closer to red.
            (than the Sun).

                                page 11

PDF page 12

Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 12; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
5.  (c) (i)     m₁m₂                     3  Accept: 2.2, 2.195, 2.1946
            F =G                    (1)
                 r²
                      6.09×10²⁴×1.77×10²⁹
            F =6.67×10⁻¹¹×          (1)
                         (     )
                         1.81×10¹¹ ²
            F =2.19×10²¹ N          (1)
        (ii)                             3  JUSTIFY
                      3
            Force is less/         (1)
                                            Look for this statement first – if
                      4
                                            incorrect or missing then 0 marks.
                                            Correct statement.     (1)
                                                                3
                                            Do not accept: decrease by
            Three times the mass gives three                    4
            times the force.       (1)
                                            Numerator three times bigger. (1)
            Doubling the distance gives quarter
            of the force.          (1)      Denominator four times bigger. (1)

                                            Can justify by calculation
                                            Correct substitution.  (1)

                                            Correct numerical final answer (1)
                                            (         )
                                             1.65×10²¹ N
                                            Accept: 1.6, 1.646, 1.6460

        (iii)                            2  INDEPENDENT MARKS

                                            Drop from same initial brightness is
                                            greater.               (1)

                                            Transit time is shorter. (1)

                                            Accept “double or multiple dips”;
                                            however if multiple dips are shown,
                                            transit times and dips must look
                                            consistent.

                                page 12

PDF page 13

Paper 2, Question 6
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 13; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
6.  (a) (i) (Some) mass (is lost and) converted 1 There must be an indication of mass
            to energy.                      being converted (or an equivalent
                                            term) to energy eg transformed,
                                            becomes, changed to.
                                            Do not accept: transferred.

                                            Mass is lost on its own (0)
                                            Mass defect is wrong physics (0)

        (ii) Mass before=4.0028×10⁻²⁵ (kg) 4 Accept: 4.8, 4.770, 4.7700
            Mass after=3.9363×10⁻²⁵+6.6447×10⁻²⁷
                                            Check for correct substitutions of
            Mass after=4.002747×10⁻²⁵ (kg)
                                            values in calculation of mass lost. If
                                            values are incorrect, maximum 1
            Mass lost=5.3×10⁻³⁰ (kg) (1)    mark for relationship, even if final
                                            answer is correct.
            E=mc²                   (1)      E =mc² anywhere, 1 mark.
            E=5.3×10⁻³⁰× ( 3.00×10⁸ ) ² (1) If masses before and after not
                                            substituted to full significant figures
            E=4.77×10⁻¹³ J          (1)
                                            as given in the table, then maximum
                                            1 mark for relationship.
                                            Ignore inappropriate reference to
                                            mass defect.
                                            Arithmetic mistake can be carried
                                            forward through the response.

    (b) (i) Nitrogen                     1           14N
                                            Accept: N or
                                                      7
        (ii) An (anti)neutrino is emitted. 1 Accept:
                                            Beta decay is evidence for (the
            OR                              existence of) the neutrino.

            An extra particle is emitted.

                                page 13

PDF page 14

Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 14; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
6.  (c) (i) Fundamental particles are not 1 Accept:
            composed of other particles.    Fundamental particles cannot be
                                            ‘broken down’ into other/smaller
                                            particles.

                                            OR

                                            Fundamental particles cannot be
                                            ‘broken down’ any further.
        (ii) Baryon(s)                   1

        (iii) 2  1   2   2             2  Accept: 5.33 × 10⁻²⁰ C
            + (e)− (e)+ (e)− (e) +s=0 (1)
             3   3   3   3  
                                             −
                                              1
                                               on its own, maximum 1 mark.
               1                              3
            s=− e                   (1)
               3
                                            Allow imprecise working leading to a
                                            correct final answer for this
             2   1   2   2        question.
            + (e) +− (e) ++ (e) +− (e) +s=0 (1)
             3   3   3   3 
               1
            s=− e                   (1)
               3

                                page 14

PDF page 15

Paper 2, Question 7
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 15; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
7.  (a)     The power per unit area (incident on 1 Accept:
            a surface).                     power per square metre.
                                            power per metre squared.
                                            power per m².

                                            Do not accept:
                                            watts per square metre.
    (b)     198.4×0.200² =7.94          3  If only 3 sets of data used correctly

                                           then maximum 2 marks.
             49.6×0.400² =7.94
                                   (2)
             22.0×0.600² =7.92             If only 2 sets of data used correctly
                                            then maximum 1 mark (for
                           
             12.4×0.800² =7.94
                                           relationship).
                                            If only 1 set of data used correctly,
                                            award 0 marks.
            statement of                    Must be clear how the candidate has
                                            used the data to obtain the
             I×d² =constant
                                            relationship.
            OR
                                            Suspend significant figure rule for
                                            calculated values of constant in this
                1
             I ∝                    (1)     question.
               d²
                                            Accept: I×d² =7.9
                                            Unit is not required but if stated
                                            needs to be correct. In this case
                                            watts, W.
                                            The ‘statement’ mark is only
                                            available if consistent with the
                                            calculations shown.
                                             I₁d₁² = I₂d₂²is insufficient on its own

                                            for statement of relationship.
                                             I×d² =k is insufficient on its own

                                            for statement of relationship.
                                            Graphical method:
                                            Graph drawn correctly. (1)

                                            Line of best fit through origin. (1)
                                            Statement of relationship. (1)

                                            A sketch graph is not acceptable.

                                page 15

PDF page 16

Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 16; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
7.  (c)     Any two from:                2  Do not accept:
            Smaller lamp / use point source. ‘repeat measurements and calculate
                                            the mean’.
            Black cloth on bench / wear black
            clothing.                       Do not accept:
                                            do it in a darkened room.
            Greater range of distances.
                                            OR
            Smaller increments of distance.
                                            any suggestion about making the
            Account for background light level room darker.
            eg Subtract background light level,
            Tare/zero the light meter.      ± rule applies for surplus responses
                                            (GMP 21).

    (d) (i) ( r =5.00×10⁻⁴ )             4  Accept: 1.2, 1.186, 1.1860

            (A=πr²)                         The use of 3.14 is acceptable for π.
                                            For use of 3.14, accept: P = 1.185,
             A=π×(5.00×10⁻⁴)²       (1)
                                            1.1854
             I =
               P
                                    (1)
               A                               P
                                             I = anywhere, 1 mark.
                          P
                                               A
            1.51×10³ =              (1)
                    π×(5.00×10⁻⁴)²
                                            If no attempt to calculate area,
             P=1.19×10⁻³ W          (1)
                                            maximum 1 mark for irradiance
                                            relationship.
        (ii) Laser is not a point source. 1
            OR
            Light from the laser does not
            conform to the inverse square law.
            OR
            Laser beam does not diverge.    Accept:
                                            The beam of light does not spread
                                            out.

                                            OR

                                            The beam of light covers same area.

                                            Do not accept:
                                            ‘irradiance doesn’t change with
                                            distance’ on its own.

                                page 16

PDF page 17

Paper 2, Question 8
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 17; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
8.  (a)     Each photon has a fixed/discrete 1 Some indication of quantisation of
            amount of energy.               energy.

            OR

            Each photon removes one electron.
    (b) (i) The minimum energy required for 1 Accept:
            (photo)electron(s) to be        The minimum energy required for
            emitted/ejected.                photoemission (of electrons).

                                            Accept: least/lowest/smallest.

                                            Do not accept: minimum energy of

                                            light without mention of photon.
        (ii) Eₖ =hf −hf₀            (1)  3  Accept: 2.7, 2.729, 2.7290
               (            )
            Eₖ = 6.63×10⁻³⁴×1.30×10¹⁵ −5.89×10⁻¹⁹ (1)
            Eₖ =2.73×10⁻¹⁹ J        (1)
                                            Alternative method:
                                             E=hf                   (1)
                                             E=6.63×10⁻³⁴×1.30×10¹⁵

                                               (            )
                                             Eₖ = 6.63×10⁻³⁴×1.30×10¹⁵ −5.89×10⁻¹⁹ (1)
                                             Eₖ =2.73×10⁻¹⁹ J       (1)

                                             E =hf on its own (0) marks.

        (iii)                            2  MUST JUSTIFY

            No effect (on the maximum kinetic Accept: no change (to the maximum
            energy).               (1)      kinetic energy).

                                            Accept:
            Each photon incident on the metal
                                             E =hf is unchanged.
            plate has the same energy as before.
                                   (1)

                                page 17

PDF page 18

Paper 2, Question 9
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 18; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
9.  (a)                                  2  INDEPENDENT MARKS
                                            Accept:

            Path difference (at the central Path difference (at the central
            maximum) is zero for each       maximum) is the same for all
            wavelength.            (1)      wavelengths.

            All wavelengths combine (to give Accept: frequency/colour for
            white light).                   wavelength, for this question.

            OR

            Constructive interference occurs for
            each wavelength.       (1)

    (b)     dsinθ= mλ               (1)  3  Accept: 24, 24.33, 24.331
               1
                   ×sinθ=1×412×10⁻⁹ (1)     Accept:
            1000000
                                             dsinθ= mλ              (1)
            θ =24.3°                (1)
                                             1×10⁻³
                                                  ×sinθ=1×412×10⁻⁹  (1)
                                             1000
                                            θ =24.3°               (1)
    (c)                                  2  INDEPENDENT MARKS
            Greater (%) absorption at red and Smaller (%) transmission at red and
            blue/violet ends of the spectrum. blue/violet ends of the spectrum.
                                   (1)                             (1)

            Smaller (%) absorption of green Greater (%) green light is
            light.                 (1)      transmitted/passes through. (1)

                                            Effect on red and blue light. (1)

                                            Effect on green light.  (1)

                                            Do not accept: any discussion of
                                            appearing green due to reflection,
                                            on its own. The question is asking
                                            about the transmitted light.

                                            Do not accept: any implication of
                                            total absorption or total
                                            transmission.

                                page 18

PDF page 19

Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 19; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
9.  (d)                                  2  INDEPENDENT MARKS

            Slit separation d of new grating Do not accept:
            is greater than the previous    fewer lines per millimetre on its
            grating.               (1)      own.

            Spectrum is narrower.           Accept:
                                            angle of dispersion is smaller.
            OR
                                            Do not accept:
            Colours in the spectrum are closer sinθor θ is smaller on its own.
            together.
                                            OR
            OR
                                            maxima less spaced out on its own.
            It is more difficult to place the
            spectrophotometer in one colour of May be answered with the aid of a
            light.                 (1)      labelled diagram.

                                page 19

PDF page 20

Paper 2, Question 10
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 20; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
10. (a)     Photons of particular/some/certain 2 Accept:
            energies/frequencies/wavelengths Particular/some/certain
            are absorbed.           (1)     frequencies/wavelengths of
                                            light/radiation are absorbed.

            in its/the Sun’s (upper/outer)  Accept:
            atmosphere/outer layers. (1)    gases or suitable named gases in
                                            place of atmosphere, but not
                                            elements or atoms on their own.

                                            Do not accept:
                                            ‘in the atmosphere’ – it is too vague.
    (b) (i) 486 nm                       1  Accept:

                                            4.86 × 10⁻⁷ m
                                            486 × 10⁻⁹ m
        (ii) v= fλ                  (1)  3  Or consistent with b(i)

            3.00×10⁸ = f ×486×10⁻⁹  (1)
                                            Accept: 6.2, 6.173, 6.1728
             f =6.17×10¹⁴ Hz        (1)
        (iii) E =hf                 (1)  3  Or consistent with b(ii)
        (A)
             E =6.63×10⁻³⁴×6.17×10¹⁴ (1)
                                            Accept: 4.1, 4.091, 4.0907
             E =4.09×10⁻¹⁹ J        (1)
                                            Accept:
                                             E₂ −E₁=hf
                                             ∆E =hf

        (iii) E to E                     1  Or consistent with (b)(iii)(A).
             1   3
        (B)
                                            Accept: (Electron transition) to E
                                                                   3
                                            Accept:
                                            E → E
                                            B¹etwee³n E and E
                                            Direction m¹ust be³ correct.
                                            Accept: correct transition indicated
                                            on energy level diagram.

                                            Do not accept:
                                            E – E
                                             1
                                            ‘E an³d E ’ on its own.
                                            Be¹tween ³E and E
                                                   3    1

                                page 20

PDF page 21

Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 21; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
10. (c) (i)                              5  Accept: 7.3, 7.317, 7.3171

               λ −λ                            λ −λ
             z = o                  (1)      z = o  anywhere, 1 mark.
                λ  ^{r}                         λ  ^{r}
                 r                               r
               672×10⁻⁹−656×10⁻⁹
             z =                    (1)
                                            Accept: 672 and 656
                   656×10⁻⁹
               v
             z =                    (1)        v
                                             z = anywhere, 1 mark
               c
                                               c
             672×10⁻⁹−656×10⁻⁹ v            substitution of 3.00 × 10⁸ (1)
                           =        (1)
                656×10⁻⁹    3.00×10⁸
            v=7.32×10⁶ ms⁻¹         (1)
                                            Alternative method:
                                             λ −λ  v
                                              o  =
                                              λ ^{r} c
                                               r
                                             672−656   v
                                                   =
                                               656   3.00×10⁸
                                             v=7.32×10⁶ ms⁻¹
                                            Equating formula,     (2)
                                            Substitution of λ and λₒ (1)
                                            Substitution of c^{r}  (1)
                                            Final answer           (1)
        (ii)                             1  Or consistent with (c)(i).
                                            Line drawn should be between the
                                            Sun and distant galaxy lines.
                                            (667 nm).
                                            Note: If value to (c)(i) is less than
                                            4.88 × 10⁶ m s⁻¹ then line can be
                                            anywhere to the right of distant
                                            galaxy line.

    (d)     Dark energy                  1

                                page 21

PDF page 22

Paper 2, Question 11
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 22; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
11. (a)     V =IR                  (1)   4  Accept: 1, 1.20, 1.200
            6.0=2.0×10⁻³×R_{T}     (1)
                                            Alternative method using V = IR
                                            twice:
                 6.0                      Relationship           (1)
             R=        −1.8×10³     (1)
                                          Substitution to find voltage across
               2.0×10⁻³ 
                                            1.8 kΩ                 (1)
             R=1.2×10³ Ω           (1)      Substitution to find R (1)
                                            Correct final answer   (1)
    (b)                                  3  SHOW question
            T =4×5.0×10⁻³ (s)       (1)
                                            Accept:
               1
            T =                     (1)         N
                f
                                             f =
                                                t
                       1
            4×5.0×10⁻³ =            (1)
                       f
                                            Accept:
             f =50 Hz
                                               1
                                            T =                     (1)
                                                f
                                                       1
                                             4×5.0×10⁻³ =           (2)
                                                       f
                                             f =50 Hz
    (c)     (Amplitude) increases   (1)  3  MUST JUSTIFY.
            Total resistance of the circuit Resistance of parallel part of circuit
            decreases.                      decreases.
            OR                              OR
            Current (in R) increases. (1)   voltage across parallel part of circuit
                                            decreases.

            Voltage across R increases. (1)
                                            Do not accept:
                                            Voltage through/in …
                                            Current across …
                                            0 marks

                                page 22

PDF page 23

Paper 2, Question 12
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 23; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
12. (a)                                  3  Accept: 1, 1.07, 1.071
            1.1 × 10⁻⁴ on the y-axis (1)
                                            Line crossing x-axis – maximum (2)
            Graph shape             (1)
                                            Line crossing y-axis – maximum (2)
            Reaches zero at 6.2     (1)
                                            Line must be a curve to award the
                                            second mark.
                                            If an acceptable value for initial
                                            current is shown, then the line must
                                            start at this value to be awarded the
                                            ‘graph shape’ mark.

                                            Line must tend towards the time axis
                                            to gain the second mark.

    (b) (i)                              2  JUSTIFY

                                            Accept:
            Decreasing (the resistance). (1) The voltage across R would decrease
                                            during charging so the resistance
                                            must be decreased to compensate.

            The current would decrease during 2ⁿ^{d} mark is for indicating what would
            charging so the resistance must be happen if you didn’t adjust the
            decreased to compensate. (1)    resistance.
                                            eg to prevent the current from
                                            decreasing

        (ii) Q= It                  (1)  3  Accept: 4, 4.20, 4.200

            Q=15×10⁻⁶×28            (1)
            Q=4.2×10⁻⁴ C            (1)

        (iii)  Q                         3  Or consistent with (b)(ii)
            C =                     (1)
               V
                                            Accept:
               4.2×10⁻⁴
                                            5, 4.67, 4.667
            C =                     (1)
                  9.0
            C =4.7×10⁻⁵ F           (1)

                                page 23

PDF page 24

Paper 2, Question 13
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 24; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
13.         Award 3 marks where the candidate 3 Candidates may use a variety of
            has demonstrated a good         physics arguments to answer this
            understanding of the physics    question.
            involved. They show a good      Award marks based on candidates
            comprehension of the physics of the demonstrating overall good,
            situation and provide a logically reasonable, limited, or no
            correct answer to the question  understanding.
            posed. This type of response might
            include a statement of the principles
            involved, a relationship or an
            equation, and the application of
            these to respond to the problem.
            The answer does not need to be
            ‘excellent’ or ‘complete’ for the
            candidate to gain full marks.
            Award 2 marks where the candidate
            has demonstrated a reasonable
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood the problem.

            Award 1 mark where the candidate
            has demonstrated a limited
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood at least a little of the
            physics within the problem.

            Award 0 marks where the candidate
            has not demonstrated an
            understanding of the physics
            involved. There is no evidence that
            they have recognised the area of
            physics involved, or they have not
            given any statement of a relevant
            physics principle. Award this mark
            also if the candidate merely restates
            the physics given in the question.

                                page 24

PDF page 25

Paper 2, Question 14
Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 25; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
14. (a) (i) Axes appropriately labelled (quantity 3 If the origin is shown the scale must
            and units) and axes linearly scaled. either be continuous, or the axis
                                    (1)     must be ‘broken’.
                                            Otherwise, maximum 2 marks.
            [Allow for axes starting at zero or
            broken axes or an appropriate
                                            If non-linear scale is used over the
            value].
                                            range of the data on either axis eg
                                            values from the table are used as
            Data points plotted accurately. (1)
                                            the scale points, (0) marks.
            Appropriate line of best-fit. (1)
                                            Do not penalise if candidates plot e
                                            against F.
                                            Accuracy of plotting should be easily
                                            checkable with the scale chosen.
                                            An appropriate scale to allow the
                                            accuracy of plotting to be checked
                                            must be linear over the range of the
                                            data.

                                page 25

PDF page 26

Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 26; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
14. (a) (ii) Choosing 2 points on their line. (1) 2 Must be consistent with graph drawn
                                            for (a)(i).
            Calculate gradient.     (1)
                                            Candidates are asked to calculate
            (min 1 sig fig, max 4 sig figs).
                                            the gradient of their line of best fit.
                                            If relationship to calculate gradient
                                            is stated incorrectly (0) marks, eg

                                                  .

            (Gradient works out as approx.
            3.3 × 10³).
                                            If candidates use values from the
                                            table, these points must lie on their
                                            line.

                                            If (×10⁻³) is not accounted for in the
                                            final answer, maximum 1 mark
                                            unless this being omitted is
                                            consistent with the graph drawn in
                                            (a)(i).

                                            A unit is not required in the final
                                            answer, but if stated it must be
                                            correct.

                                            If candidate has a non-linear scale
                                            over the range of the values used in
                                            the substitution, (0) marks.

                                            If candidate has drawn a ‘dot to dot’
                                            graph or no line, (0) marks.

                                page 26

PDF page 27

Original 2025 Higher Physics - Paper 2 marking instructions, PDF page 27; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
14. (a) (iii)       EA                 2  Must be consistent with (a)(ii).
             gradient =
                      
                    L 
                                            Must substitute the gradient of their
                    E×5.9×10⁻⁸              line of best fit, and not a single data
            3.3×10³ =               (1)
                      1.500                 point.
             E =8.4×10¹⁰ Pa         (1)
                                            If a single data point is substituted
                                            into in the calculation, award (0)
                                            marks.
                                            Accept: correct alternative units.
                                            If candidate has plotted extension
                                            against force, the formula becomes
                                                    L 
                                             gradient =
                                                      
                                                    EA
                                                       1.500
                                            3.3×10⁻⁴ =             (1)
                                                     E×5.9×10⁻⁸
                                             E =8.4×10¹⁰ Pa        (1)
    (b)     There is (a non-zero) y-intercept. 1
            OR

            the line of best fit does not go
            through the origin.

                       [END OF MARKING INSTRUCTIONS]

                                page 27