2024 Higher Physics - Paper 2 marking instructions

Source: Scottish Qualifications Authority (SQA) / Qualifications Scotland. This is a StemInteract HTML companion, not an official HTML edition. Selectable text is supplied alongside original page images. Use the images or original PDF for equations, powers, fractions, vector notation, tables and diagrams; text extraction cannot fully preserve mathematical layout.

Jump to a question

PDF page 1

Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 1; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
National

                  Qualifications
                  2024

                           2024    Physics

                         Higher   – Paper   2

      Question    Paper    Finalised   Marking    Instructions

 Scottish Qualifications Authority 2024

These marking instructions have been prepared by examination teams for use by SQA appointed
markers when marking external course assessments.

The information in this document may be reproduced in support of SQA qualifications only on a non-
commercial basis. If it is reproduced, SQA must be clearly acknowledged as the source. If it is to be
reproduced for any other purpose, written permission must be obtained from permissions@sqa.org.uk.

PDF page 2

Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 2; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
General marking principles for Physics Higher

This information is provided to help you understand the general principles you must apply when
marking candidate responses to questions in this paper. These principles must be read in conjunction
with the detailed marking instructions, which identify the key features required in candidate
responses.

(a) Marks for each candidate response must always be assigned in line with these marking principles,
    the Physics: general marking principles (GMPs) (Physics: general marking principles - National 3
    to Advanced Higher (sqa.org.uk)) and the detailed marking instructions for this assessment.

(b) Marking should always be positive. This means that, for each candidate response, marks are
    accumulated for the demonstration of relevant skills, knowledge and understanding: they are
    not deducted from a maximum on the basis of errors or omissions.

(c) If a specific candidate response does not seem to be covered by either the principles or detailed
    marking instructions, and you are uncertain how to assess it, you must seek guidance from your
    team leader.

(d) Where a candidate answers part of a question incorrectly and carries the incorrect answer
    forward in the following part, award marks if the incorrect answer has then been used correctly
    in the subsequent part or ‘follow-on’. (GMP 16)

(e) Award marks for non-standard symbols where the symbols are defined and the relationship is
    correct, or where the substitution shows that the relationship used is correct. This must be clear
    and unambiguous. (GMP 20)

(f) Award full marks for a correct final answer (including units if required) on its own, unless a
    numerical question specifically requires evidence of working to be shown, eg in a ‘show’
    question. (GMP 1)

(g) Award marks where a diagram or sketch conveys correctly the response required by the
    question. It will usually require clear and correct labels (or the use of standard symbols). (GMP
    19)

(h) Marks are allocated for knowledge of relevant relationships alone. Do not award a mark when a
    candidate writes down several relationships and does not select the correct one to continue
    with, for example by substituting values. (GMP 1c)

(i) Do not award marks if a ‘magic triangle’ (eg) is the only statement in a candidate’s
    response. To gain the mark, the correct relationship must be stated, for example V = IR or
       V
    R =  . (GMP 2)
       I
(j) In rounding to an expected number of significant figures, award the mark for responses that have
    up to two figures more or one figure less than the number in the data with the fewest significant
    figures. (GMP 6)
                                
    (Note: the use of a recurrence dot, eg 0.6, would imply an infinite number of significant figures
    and would therefore not be acceptable.)

                                page 02

PDF page 3

Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 3; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(k) The incorrect spelling of technical terms should usually be ignored and candidates should be

    awarded the relevant mark, provided that answers can be interpreted and understood without
    any doubt as to the meaning.
    Where there is ambiguity, do not award the mark. Two specific examples of this would be when
    the candidate uses a term:

     • that might be interpreted as reflection, refraction or diffraction, eg ‘defraction’
     • that might be interpreted as either fission or fusion, eg ‘fussion’

    The spelling of these words is similar, but the words have totally different meanings. If the
    spelling (or handwriting) in an answer makes it difficult for you to interpret a candidate’s
    intention, then do not award the mark. (GMP 22)

(l) Marks are awarded only for a valid response to the question asked. For example, in response to
    questions that ask candidates to:
    • identify, name, give, or state, they need only name or present in brief form.

    • describe, they must provide a statement or structure of characteristics and/or features.
    • explain, they must relate cause and effect and/or make relationships between things clear.

    • determine or calculate, they must determine a number from given facts, figures or
      information.
    • estimate, they must determine an approximate value for something.

    • justify, they must give reasons to support their suggestions or conclusions. For example this
      might be by identifying an appropriate relationship and the effect of changing variables.
    • show that, they must use physics [and mathematics] to prove something, for example a given
      value – all steps, including the stated answer, must be shown.

    • predict, they must suggest what may happen based on available information.
    • suggest, they must apply their knowledge and understanding of physics to a new situation. A
      number of responses are acceptable: award marks for any suggestions that are supported by
      knowledge and understanding of physics.

    • use their knowledge of physics or aspect of physics to comment on, they must apply their
      skills, knowledge and understanding to respond appropriately to the problem/
      situation presented (for example by making a statement of principle(s) involved and/or a
      relationship or equation, and applying these to respond to the problem/situation). Candidates
      are given credit for the breadth and/or depth of their conceptual understanding.

Standard three marker
The examples over the page set out how to apportion marks to answers requiring calculations. These
are the ‘standard three marker’ type of questions.
Award full marks for a correct answer to a numerical question, even if the steps are not shown
explicitly, unless it specifically requires evidence of working to be shown.
For some questions requiring numerical calculations, there may be alternative methods
(eg alternative relationships) that would lead to a correct answer.

Sometimes, a question requires a calculation that does not fit into the ‘standard three marker’ type of
response. In these cases, the detailed marking instructions will contain guidance for marking the
question.
When marking partially correct answers, apportion individual marks as shown over the page.

                                page 03

PDF page 4

Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 4; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(l) Marking in calculations
    Example question
    The current in a resistor is 1·5 amperes when the potential difference across it is 7·5 volts.
    Calculate the resistance of the resistor. (3 marks)

       Example response Mark and comment

     1. V = IR          1 mark: relationship
       7.5 = 1.5R       1 mark: substitution

       R = 5.0 Ω        1 mark: correct answer

     2. 5.0 Ω           3 marks: correct answer
     3. 5.0             2 marks: unit missing

     4. 4.0 Ω           0 marks: no evidence, wrong answer

     5. __ Ω            0 marks: no working or final answer
     6.    V  7.5
        R = =    =4.0 Ω 2 marks: arithmetic error
           I  1.5
     7.    V
        R = =4.0 Ω      1 mark: relationship only
           I
     8.   V
        R= =__Ω         1 mark: relationship only
          I
     9.    V  7.5
        R = =   = __Ω   2 marks: relationship and substitution, no final answer
           I  1.5
    10.   V  7.5
        R=  =   =4.0    2 marks: relationship and substitution, wrong answer
           I 1.5
    11.   V   1.5
        R=  =   =5.0 Ω  1 mark: relationship but wrong substitution
           I  7.5
    12.   V   75
        R=  =   =5.0 Ω  1 mark: relationship but wrong substitution
           I 1.5
    13.    I  1.5
        R=  =   =5.0 Ω  0 marks: wrong relationship
          V   7.5
    14. V = IR
       7.5 = 1.5 × R
       R = 0.2 Ω        2 marks: relationship and substitution, arithmetic error
    15. V = IR
           I  1.5
        R=  =   =0.2 Ω  1 mark: relationship correct but wrong rearrangement of
          V   7.5              symbols

                                page 04

PDF page 5

Paper 2, Question 1
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 5; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Marking instructions for each question

                                        Max
   Question       Expected response               Additional guidance
                                       mark
1.  (a) (i) ( uₕ =ucosθ )                1  Accept: 8.9, 8.899, 8.8992
        (A)
            ( uₕ =11.0×cos36.0 )
            uₕ =8.90 ms⁻¹

        (B) ( uᵥ =usinθ )                1  Accept: 6.5, 6.466, 6.4656
            ( uᵥ =11.0×sin36.0 )

            uᵥ =6.47 ms⁻¹

        (ii) s =vt                  (1)  3  OR consistent with (a)(i)(A)
                                            Accept: 14, 13.62, 13.617
             s =8.90×1.53           (1)
             s =13.6 m              (1)     Accept:
                                             s =vt
                                            OR
                                             d =vt
                                            OR
                                             d =vt
                                            OR
                                               1
                                             s = (u+v)t
                                               2
                                            OR
                                                  1
                                             s=ut+ at²
                                                  2
        (iii)   1                        4  OR consistent with (a)(i)(B)
            s=ut+
                2
                at²                 (1)
                                            Accept: 1, 1.22, 1.224
            s =( 6.47×0.95 )+ ( 0.5×(−9.8 )×0.95² ) (1)
                                            u and a must have opposite signs
            h=1.60+ (( 6.47×0.95 )+ ( 0.5×(−9.8 )×0.95² )) −2.10 (1) Alternative methods eg using
                                            v² =u² +2as and v=u+at
            h=1.2 m                 (1)
                                            1 mark for both relationships
                                            1 mark for substitutions into both
                                            relationships
                                            1 mark for calculation to find h
                                            1 mark for final answer

                                page 05

PDF page 6

Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 6; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
1.  (b) (i)         v                  3  Accept: 640, 638.1, 638.14
             fₒ = fₛ v±vₛ 
                       
                                    (1)
                                            Accept: fₒ = fₛ
                                                       
                                                       
                                                         v  
                                                            
                       3.40×10² 
                                                       v−vₛ
                                                            
             fₒ = 622×           (1)
                     3.40×10² −8.60
             fₒ =638 Hz             (1)
        (ii) (The foam) increases the time of 2 INDEPENDENT MARKS
            contact (with the handles) (1)
                                            Accept: time/duration of collision
            The force (on the circuit board) is Accept: force on ball is less
            less                   (1)
                                            Accept: ‘rate of change of
                                            momentum’ for force

                                page 06

PDF page 7

Paper 2, Question 2
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 7; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
2.  (a) (i) F =mgsinθ               (1) 3   Accept: 5000, 4903
            F =( 1650+1350 )×9.8×sin9.6 (1)
                                            Do not accept: W =mgsinθ
            F =4900 N              (1)
                                            Accept:
                                            W_{c}ₒₘₚ =mgsinθ
                                            Wₚₐᵣₐₗₗ =mgsinθ
                                                 el
                                            W_{d}ₒ_{w}ₙ =mgsinθ
                                                 slope
                                            W_{/}_{/} =mgsinθ
        (ii) (1800+4900 =)6700 N        1   Must be consistent with (a)(i)

    (b) (i) v =u+at                (1)  2   SHOW question
            9.5=4.0+( a×250 )       (1)

            a =0.022 ms⁻²

        (ii) F =ma                  (1) 3   Or consistent with (a)(ii)
                                            Accept: 6800, 6770
            F =(1650+1350)×0.022    (1)

            ( F_{f}ₒᵣ_{w}ₐᵣ_{d} =( (1650+1350)×0.022 )+6700 )

            F_{f}ₒᵣ_{w}ₐᵣ_{d} =6766 N (1)

        (iii) The frictional force remains 1800 N/ 1 Accept:
            constant                        the slope does not change.
                                            OR
                                            mass does not change.
                                            OR
                                            air resistance does not change.

                                            Do not accept:
                                            acceleration is constant.
                                            OR
                                            friction/air resistance is negligible.

    (c)                                 3   Accept: 1000, 1420, 1416

             F =ma                 (1)       T =ma on its own – 0 marks
             F =1350×0.16           (1)
            ( Tension=( 1350×0.16 )+1200 )

            Tension=1400 N          (1)

                                page 07

PDF page 8

Paper 2, Question 3
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 8; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
3.          Award 3 marks where the candidate 3 Candidates may use a variety of
            has demonstrated a good         physics arguments to answer this
            understanding of the physics    question.
            involved. They show a good      Award marks based on candidates
            comprehension of the physics of the demonstrating overall good,
            situation and provide a logically reasonable, limited, or no
            correct answer to the question  understanding.
            posed. This type of response might
            include a statement of the principles
            involved, a relationship or an
            equation, and the application of
            these to respond to the problem.
            The answer does not need to be
            ‘excellent’ or ‘complete’ for the
            candidate to gain full marks.
            Award 2 marks where the candidate
            has demonstrated a reasonable
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood the problem.

            Award 1 mark where the candidate
            has demonstrated a limited
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood at least a little of the
            physics within the problem.

            Award 0 marks where the candidate
            has not demonstrated an
            understanding of the physics
            involved. There is no evidence that
            they have recognised the area of
            physics involved, or they have not
            given any statement of a relevant
            physics principle. Award this mark
            also if the candidate merely restates
            the physics given in the question.

                                page 08

PDF page 9

Paper 2, Question 4
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 9; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
4.  (a) (i) 6.0×10²⁴                   2  Accept:
            
             5.3×10¹¹
                    
                    
                     =1.1×10¹³      (1)
                                             
                                             
                                             10²⁴ 
                                                
                                                 =10¹³
                                             10¹¹ 
                                            OR
                                            (24-11) = 13        (1)
            (Mass of Earth is)              Do not accept:
            13 (orders of magnitude) greater ‘heavier’ for ‘greater’
            OR
            (mass of) Didymos is 13 (orders of Accept:
            magnitude) smaller     (1)      ‘13 greater’ on its own (2)
                                            Do not accept:
                                            ‘13 times greater’ on its own (0)
                                            Care should be taken where
                                            candidates answer by the
                                            reciprocal method – 2 marks are
                                            still available.
                                              5.3×10¹¹ 
                                                    =8.8×10⁻¹⁴   (1)
                                             6.0×10²⁴ 
                                            Comparison statement  (1)
        (ii)    m₁m₂                     3  Accept: 2, 1.75, 1.753
            F =G                    (1)
                 r²
                                
                      5.3×10¹¹×6.0×10²⁴
            F
              =6.67×10⁻¹¹×      
                                    (1)
                        (    )  
                         1.1×10¹⁰ ²
                                
            F =1.8×10⁶ N            (1)
    (b) (i)     1                        3  Accept: 1, 1.24, 1.241
            Eₖ = mv²               (1)
                2
                1     (     )
            Eₖ = ×570× 6.6×10³ ²   (1)
                2
            Eₖ =1.2×10¹⁰ J         (1)
        (ii) Force-time graph with bell-shaped 1
            curve or equivalent triangle

                                page 09

PDF page 10

Paper 2, Question 5
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 10; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
5.  (a)        1                       3  Accept: 5, 5.25, 5.250
             T =
                  
                f
                                          Accept:
                1                          d =vt                  (1)
             3.5=
                  
                f                          d =1.5×3.5             (1)
            v= fλ                   (1)      d =5.3 m               (1)
                 1
            1.5=   ×λ               (1)
                3.5                         Accept:
             λ=5.3 m               (1)       s = 1 (u+v)t for this method
                                               2
    (b)                                  2  MUST JUSTIFY
            (The star is moving) away (relative
            to the observer.)      (1)
                                            Accept: explanations about
            The (observed) wavelength has
                                            increased distance between
            increased.             (1)
                                            wavefronts/students
                                            Accept:
                                            fewer wavefronts/students passing
                                            (the observer) per second
                                            OR
                                            observed frequency has decreased
                                            Do not accept:
                                            the (observed) wavelength is
                                            increasing
                                            Do not accept:
                                            Any answer that implies that the
                                            frequency/wavelength of the ‘star’
                                            itself is changing.

                                page 10

PDF page 11

Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 11; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
5.  (c) (i)                              2  INDEPENDENT MARKS
            Statement of Olbers’ paradox (1) Olbers’ paradox states the darkness
                                            of the (night) sky disagrees with/is
                                            contrary to/conflicts with the idea
                                            of a non-expanding/static Universe

                                            OR
                                            If all stars/galaxies/celestial objects
                                            are (equally) bright at fixed
                                            distances from an observer on Earth,
                                            then we should see a bright night sky
                                            OR
                                            If the Universe had always existed
                                            the night sky would not be dark
                                            OR

                                            If the Universe is non-expanding /
                                            static/infinite the night sky would
                                            not be dark/would be bright (1)

                                            Many stars/galaxies/celestial objects
            Explanation of redshift of light to IR are moving away from an observer
                                            on Earth and so the light from these
            OR                              objects is redshifted to the IR region
                                            of the EM spectrum and
            time delay argument     (1)     undetectable with the naked eye,
                                            leaving the sky dark.

                                            OR
                                            Many stars/galaxies/celestial objects
                                            are moving away from an observer
                                            on Earth and so the light from these
                                            objects has yet to reach an observer
                                            on Earth, leaving the sky dark.
                                            OR
                                            Light would have had sufficient time
                                            to reach the observer (1)

                                page 11

PDF page 12

Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 12; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
5.  (c) (ii) Cosmic Microwave Background 1  Do not accept: the abbreviation
            Radiation                       ‘CMBR’ on its own.
                                            Accept:
                                            Abundance of hydrogen and helium
                                            (in the Universe)
                                            OR
                                            the abundance of light elements
                                            (in the Universe)
                                            OR
                                            Hubble-Lemaître Law/Hubble’s Law

                                            Do not accept:
                                            Redshift

                                            +/- rule applies (GMP 21)

                                page 12

PDF page 13

Paper 2, Question 6
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 13; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
6.  (a) (i)                              1  Direction must be correct.
                                            Field lines must be passably
                                            straight/spaced approximately
                                            uniformly.

                                            Field lines must start and end on the
                                            plates and be perpendicular.

                                            Minimum 3 approximately equally
                                            spaced lines that cover most of the
                                            vertical space between the plates
                                            (that is one near the top, one at the
                                            middle, and one near the bottom).

                                            Ignore end effects.

        (ii)    1                        3  Accept: 2.9, 2.903, 2.9035
             Eₖ = mv²               (1)
                2
                      1
            3.84×10⁻¹⁶ = ×9.11×10⁻³¹×v² (1)
                      2
            v=2.90×10⁷ ms⁻¹         (1)
        (iii) v² =u²+2as            (1)  3  Or consistent with (a)(ii)
                                            Accept: 9.3, 9.344, 9.3444
            (      )
             2.90×10⁷ ² =0²+2×a×45.0×10⁻³ (1)
                                            Alternative methods eg
            a=9.34×10¹⁵ ms⁻²        (1)
                                            W = Fd and F =ma
                                            1 for both relationships
                                            1 for both substitutions
                                            1 for final answer
                                            For this method accept: 9.4, 9.37,
                                            9.367, 9.3670
    (b)     Out of page                  1

                                page 13

PDF page 14

Paper 2, Question 7
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 14; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
7.          Award 3 marks where the candidate 3 Candidates may use a variety of
            has demonstrated a good         physics arguments to answer this
            understanding of the physics    question.
            involved. They show a good      Award marks based on candidates
            comprehension of the physics of the demonstrating overall good,
            situation and provide a logically reasonable, limited, or no
            correct answer to the question  understanding.
            posed. This type of response might
            include a statement of the principles
            involved, a relationship or an
            equation, and the application of
            these to respond to the problem.
            The answer does not need to be
            ‘excellent’ or ‘complete’ for the
            candidate to gain full marks.
            Award 2 marks where the candidate
            has demonstrated a reasonable
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood the problem.

            Award 1 mark where the candidate
            has demonstrated a limited
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood at least a little of the
            physics within the problem.

            Award 0 marks where the candidate
            has not demonstrated an
            understanding of the physics
            involved. There is no evidence that
            they have recognised the area of
            physics involved, or they have not
            given any statement of a relevant
            physics principle. Award this mark
            also if the candidate merely restates
            the physics given in the question.

                                page 14

PDF page 15

Paper 2, Question 8
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 15; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response               Additional guidance
                                        mark
8.  (a)      5.00                        3   If only 3 calculations completed
                  =40.8
                                             correctly then maximum 2 marks.
             0.350²
                                             If only 2 calculations completed
             10.00                           correctly then maximum 1 mark
                  =40.8
                                             (for relationship).
             0.495²
                                    (2)      If only 1 calculation completed
                                             correctly, award 0 marks.
             15.00
                  =40.8
             0.606²
                                             Must be clear how the candidate
                                             has used the data to establish the
                                             relationship.
             20.00
                  =40.8
             0.700²                          Accept:
                                              L
                                                =constant
                                              d²
            Therefore
                                              L
                                                =k
                                              d²
             L₂                               L
               =constant            (1)         =40.8
             d₂²                              d²
                                             Ignore inappropriate averaging in
                                             this case.
                                             The ‘conclusion’ mark is only
                                             available if consistent with the
                                             calculations shown.
                                             Graphical method:
                                             Graph drawn correctly (1)
                                             Line of best fit through origin (1)
                                             Statement of relationship. (1)
                                             A sketch graph is not acceptable.

                                page 15

PDF page 16

Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 16; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response               Additional guidance
                                        mark
8.  (b)     (Lamps can be considered as) point 1
            source(s of light.)
    (c) (i)    ( 0.88+0.86+0.90+0.89+0.86 ) 1 Accept: 0.9, 0.878, 0.8780
            d =                      
                         5           

            d =0.88 m
        (ii)    Rₘₐₓ −Rₘᵢₙ             2   Accept: 0.008
            ΔR=
                         
                   n    
                0.90−0.86                    Accept:
             Δd =                   (1)
                    5                         d =( 0.88±0.01 ) m
             Δd =(±)0.01 m          (1)      OR
                                              ΔR=(±)0.01 m
        (iii)  Lₗₐₘₚ L_{S}ᵤₙ           2   Or consistent with (c)(i)
                =    
             d²   D²                       Accept: 3, 2.91, 2.905
            1.0×10²    L_{S}ᵤₙ
                  =                 (1)
             0.88²  ( 1.5×10¹¹ ) ²

             L_{S}ᵤₙ =2.9×10²⁴ W    (1)

                                page 16

PDF page 17

Paper 2, Question 9
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 17; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response                Additional guidance
                                        mark
9.  (a) (i)  E =hf                 (1)   3   Accept: 8.3, 8.288, 8.2875
             E =6.63×10⁻³⁴×1.25×10¹⁵ (1)

             E =8.29×10⁻¹⁹ J       (1)

        (ii) Energy of photons is greater than 2 Must have first statement
            work function.                   otherwise 0 marks.

            OR                               Accept: for the first mark
                                             arguments about the threshold
            Energy of photons is high enough. frequency being less than the
                                             photon frequency.
            OR
            Frequency (of UV/photons/radiation)
            is greater than threshold frequency.

            OR
                                             For second mark
            Frequency (of UV/photons/radiation) Looking for an indication that the
            is high enough.         (1)      (photo)electrons are completing
                                             the circuit.

            The (photo)electrons are attracted Accept:
            to/move towards the (positive) wire The electrons are attracted/move
                                             to the positive terminal.
            mesh.                  (1)
    (b)     (Current) increases     (1)  2   MUST JUSTIFY

                                             Accept:
            More photons incident (on the zinc there are more (photo)electrons
            plate per second)       (1)      ejected (per second).

    (c)                                  2   JUSTIFY

            Current is zero         (1)      Accept:
                                             (Current) decreases   (1)

                                             Accept:
            No (photo)electrons reach wire mesh
                                             Zinc plate positively charged
                                   (1)
                                             OR
                                             (photo)electrons are attracted
                                             back to the zinc plate
                                             OR
                                             Fewer (photo)electrons reach wire
                                             mesh (per second)     (1)

                                page 17

PDF page 18

Paper 2, Question 10
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 18; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
10. (a)     v= fλ                   (1)  3  Accept: 0.2, 0.200, 0.2000
            3.40×10² =1700×λ        (1)

             λ=0.20 m               (1)

    (b)     path difference=mλ      (1)  4  Or consistent with (a)
            (1.80−1.50)=m×0.20      (1)
                                                     3
            m=1.5                   (1)     Accept: m= in this case.
                                                     2
            destructive (interference) (1)
                                            Accept:
                                                            1
                                            path difference=(m+ )λ (1)
                                                            2
                                                         1
                                            (1.80−1.50)=(m+ )×0.20 (1)
                                                         2
                                             m=1                   (1)
                                            destructive (interference) (1)
                                            Using either relationship, if m is not
                                            an integer multiple of ½ then final
                                            mark is not accessible.
    (c)                                  2  JUSTIFY

                                            Must be consistent with conclusion
                                            from (b)

                                            Accept: louder
            (The amplitude) increases. (1)
            (Destructive) interference no longer Second mark can be justified by
            takes place.            (1)     diagram.

                                page 18

PDF page 19

Paper 2, Question 11
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 19; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
11. (a) (i) 6                            1
        (ii) E to E                      1  Accept:
             3   0
                                            E  E
                                            B³etwee⁰n E and E
                                                   3    0
                                            Direction must be correct.
                                            Do not accept:
                                            E – E
                                             3
                                            ‘E an⁰d E ’ on its own
                                            Be³tween ⁰E and E
                                                   0    3

                                page 19

PDF page 20

Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 20; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
11. (b) (i) E₂−E₁=hf                     4  Accept: 4.9, 4.863, 4.8631
            −1.36×10⁻¹⁹−
                   (
                    −5.45×10⁻¹⁹
                          )
                           =6.63×10⁻³⁴×f (1)
                                            1 mark for both relationships
                                            (anywhere)
            v= fλ                   (1)
                                            1 mark for substitution into 1^{s}^{t}
            (for both relationships anywhere)
                                            relationship
                                            1 mark for substitution into 2ⁿ^{d}
                  −1.36×10⁻¹⁹− ( −5.45×10⁻¹⁹ ) relationship
            3.00×10⁸=           ×λ (1)
                      6.63×10⁻³⁴          1 mark for final answer
                                
            λ=4.86×10⁻⁷ m           (1)
                                            Accept:
                                             E₃−E₁=hf
                                            Do not accept:
                                             E₁−E₃ =hf
                                            Accept:
                                            5.45×10⁻¹⁹−1.36×10⁻¹⁹ =6.63×10⁻³⁴× f
                                            for 1^{s}^{t} substitution mark
                                            Note:
                                             ΔE =4.09×10⁻¹⁹ (J)
                                            Accept:
                                            (Δ)E =hf and v= fλ
                                            If 1 36×10⁻¹⁹ − 5 45×10⁻¹⁹ is shown
                                            for ΔE, maximum 1 mark for correct
                                            rela⋅tionships. ⋅
                                            Alternative methods:
                                                  hc
                                             (Δ)E =
                                                  λ
                                            OR
                                                   hc
                                             E₂ −E₁=
                                                    λ
                                            Combined relationship  (1)
                                            Substitution for h and ∆E (1)
                                            Substitution for c    (1)
                                            Final answer           (1)
        (ii) (emitted photon is) blue-green (1) 1 Must be consistent with (b)(i)

                                page 20

PDF page 21

Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 21; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
11. (c)                                  2  INDEPENDENT MARKS
            (For the red line) more electrons are Do not accept greater brightness due
            making this transition (per second). to greater frequency/energy of the
                                   (1)      photons.

            (Therefore), there are more photons ‘More electrons release more
            (per second) emitted (of that   photons’ on its own – MAX 1 mark
            specific energy and so produce a
            brighter line).        (1)

                                page 21

PDF page 22

Paper 2, Question 12
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 22; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
12. (a)     Plot a graph of sinθᵢ against sinθᵣ 2 Accept: sini and sinr
                                    (1)

                                            Accept: gradient of graph is n
            Calculate gradient of graph (1)
                                            Accept reciprocal method:
                                            Plot a graph of sinθᵣ against sinθᵢ
                                                                    (1)
                                            Calculate inverse of gradient of
                                            graph                  (1)

                                            Do not accept:
                                            Calculating n for each angle of
                                            incidence and averaging
                                            (as this is an example of invalid

                                            averaging)
    (b)           1                      3  Accept: 42, 41.81, 41.810
            sinθ_{c} =             (1)
                  n
                   1
            sinθ_{c} =              (1)
                  1.50
            θ_{c} =41.8°           (1)
    (c)                                  2  Must be consistent with (b)

            Total internal reflection (1)   Ray must be passably straight.

            50º reflected angle shown on    Any change in direction at curved
                                            Perspex-air boundary MAX 1 mark.
            diagram                 (1)
                                            If answer for (b) is greater than 50º,
                                            MAX 1 mark for a ray that refracts
                                            away from the normal.

                                page 22

PDF page 23

Paper 2, Question 13
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 23; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
13. (a)     (An alternating current) changes 1 Accept:
            direction and (instantaneous) value ‘magnitude’ for ‘value’
            with time.
    (b)         Vₚₑₐₖ                    3  Accept: 10, 10.6, 10.61
            Vᵣₘₛ =                 (1)
                  2
                (3×5.0)
            Vᵣₘₛ =                 (1)
                   2
            Vᵣₘₛ =11 V              (1)
    (c)         1                        3
            T =                     (1)
                f
                1
            T =                     (1)
               250
            (           )
             T =4.0×10⁻³ s
            ( λ=4 div)
             Timebase setting=
            4.0×10⁻³         
            
                     =1.0×10⁻³ =
                              
               4             
            1
              (ms/div)
                                    (1)
                                            Accept:
                                            1 ms
                                            OR
                                            1.0 × 10⁻³ s in this instance

                                page 23

PDF page 24

Paper 2, Question 14
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 24; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
14. (a) (i) 3.8 Ω                        1  Accept: 3.7 – 3.8
        (ii) ( gradient =E )             2  Or consistent with (a)(i)

                    0−(−3.8)
                                            substitution of any valid pair of
             gradient =             (1)
                    0.20−0                  points from line into gradient
                                            formula               (1)
             E =19 V                (1)
                                            value for E           (1)

                                            For any value for E stated on its
                                            own, without any working, accept a
                                            value within the range: 18.5 – 20 V

                                            Alternative methods:

                                               1     
                                             R =  ×E −r
                                                I    
                                            11.4 =0.8×E−3.8      (1)
                                             E =19 V             (1)

                                            OR

                                                E  
                                             R = −r
                                                I  
                                                   E
                                            11.4 =   −3.8        (1)
                                                 1.25
                                             E =19 V             (1)
                                            If using this method, must use data
                                            from the line and value of r

                                            consistent with (a)(i)

                                            Do not accept:
                                            Any implication that gradient ≠ E,
                                                       E
                                            eg gradient = , (0)
                                                       I

                                page 24

PDF page 25

Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 25; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
14. (a) (iii)      1                   2  Accept: 5, 5.00, 5.000
            Iₛ_{c} =   
                x intercept
                                            Alternative method:
                 1
                                                E  
             Iₛ_{c} =               (1)      R = −r
                0.20
                                                I  
             Iₛ_{c} =5.0 A          (1)
                                             ( Iₛ_{c} occurs when R =0 Ω )
                                               19
                                             0 =  −3.8             (1)
                                               Iₛ_{c}
                                             Iₛ_{c} =5.0 A         (1)
                                            OR
                                             ( E = Ir ) OR ( V = IR )
                                            19= I×3.8              (1)
                                             I =5.0 A               (1)
                                            OR consistent with (a)(i) and/or
                                            (a)(ii)
    (b)                                  2  JUSTIFY
            Same                    (1)

                 E
            I_{S}_{C} = 
                 r 
                                            Short circuit current is not affected
            E and r are unchanged.  (1)
                                            by load resistance/external
                                            resistance/R
                                            OR

                                            When a battery is short circuited the
                                            only resistance in the circuit is r (for
                                            the same E).           (1)

                                page 25

PDF page 26

Paper 2, Question 15
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 26; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
15. (a)      1  1   1                    3  Accept: 20, 22.0, 22.00
               =  +  +⋅⋅⋅           (1)
             R_{T} R₁ R₂
                                            If incorrect relationship used eg
             1   1     1
               =   +⋅⋅⋅+            (1)         1  1
             R_{T} 220 220                   R_{T} = + +⋅⋅⋅ then 0 marks
                                                R₁ R₂
             R_{T} =22 Ω            (1)
                                            Alternative method:
                                                R
                                             R_{T} =          (1)
                                                n
                                                220
                                             R_{T} =          (1)
                                                10
                                             R_{T} =22 Ω      (1)
    (b) (i) Photovoltaic (effect)        1
        (ii) Electrons gain/absorb energy from 3 Look for reference to both
            photons/light           (1)     conduction and valence band first,
                                            otherwise (0) marks.

            Electrons move from valence band to
                                            Bands must be named correctly, eg
            conduction band         (1)
                                            do not accept ‘valency’ or
                                            ‘conductive’.
            Electrons move towards n-type
                                            Third statement is dependent on
            (semiconductor producing a
                                            second statement.
            potential difference).  (1)

                                page 26

PDF page 27

Paper 2, Question 16
Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 27; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                        mark
16. (a) (i) Axes appropriately labelled (quantity 3 If the origin is shown the scale must
            and units) and axes linearly scaled (1) either be continuous, or the axis
                                             must be ‘broken’.
            [Allow for axes starting at zero or Otherwise, maximum 2 marks.
            broken axes or an appropriate value]
                                             If non-linear scale is used over the
            Data points plotted accurately (1) range of the data on either axis eg
                                             values from the table are used as
            Appropriate line of best-fit (1) the scale points, (0) marks.
                                             Do not penalise if candidates plot e
                                             against F.

                                             Accuracy of plotting should be
                                             easily checkable with the scale
                                             chosen.
                                             An appropriate scale to allow the
                                             accuracy of plotting to be checked
                                             must be linear over the range of the
                                             data.

                                page 27

PDF page 28

Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 28; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response              Additional guidance
                                        mark
16. (a) (ii)
             (gradient =k)
                                         2   Must be consistent with (a)(i).
                         5.9−2.6
              gradient =             (1)
                                             If relationship to calculate gradient
                     24×10⁻³ −10×10⁻³
                                             is stated incorrectly (0) marks, eg
              k =240 Nm⁻¹           (1)
                                             y² − y¹
                                             x² −x¹
                                             Tolerance required depending upon
                                             best fit line drawn by the
                                             candidate.
                                             If candidates use values from the
                                             table, these points must lie on their
                                             line.
                                             If (×10⁻³) is not accounted for in the
                                             final answer, maximum 1 mark
                                             unless this being omitted is
                                             consistent with the graph drawn in
                                             (a)(i).
                                             If the candidate has drawn a
                                             straight line through the origin,
                                             then any point on the line can be
                                             used to calculate the spring
                                             constant using F = ke
                                             If the line drawn (or extrapolated
                                             line) does NOT pass through the
                                             origin, the gradient of the line must
                                             be used and not one single point
                                             selected, otherwise 0 marks.

                                             If the candidate uses a broken scale
                                             on either axis, or does not start
                                             their scale at zero, they must use
                                             the gradient in their calculation of
                                             k, otherwise 0 marks.

                                             If candidate has plotted e against F,
                                             then any implication of
                                             k = gradient, 0 marks, as in this
                                             case:
                                                  1
                                             k =
                                                gradient

                                page 28

PDF page 29

Original 2024 Higher Physics - Paper 2 marking instructions, PDF page 29; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response                Additional guidance
                                        mark
16. (a) (iii) Repeat the measurements and 1  Accept: ‘Average’ for ‘mean’
            calculate the mean
                                             Accept: use smaller increments
            OR

            Use a greater range of
            masses/forces
                                             Do not accept:
                                             ‘Repeat the experiment and take
                                             the mean’ on its own.

                                             OR

                                             ‘Take more measurements’ on its
                                             own.

                                             OR

                                             Answers addressing precision of
                                             measuring instruments.

                                             OR

                                             Answers addressing a systematic
                                             uncertainty.

    (b)         ke²                      2   Must be consistent with (a)(ii)
             Eₑ =
                 2
                    (     )
                240× 22×10⁻³ ²
             Eₑ =                  (1)
                     2
             Eₑ = 5.8×10⁻² J       (1)

                       [END OF MARKING INSTRUCTIONS]

                                page 29