2022 Higher Physics - Paper 2 marking instructions

Source: Scottish Qualifications Authority (SQA) / Qualifications Scotland. This is a StemInteract HTML companion, not an official HTML edition. Selectable text is supplied alongside original page images. Use the images or original PDF for equations, powers, fractions, vector notation, tables and diagrams; text extraction cannot fully preserve mathematical layout.

Jump to a question

PDF page 1

Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 1; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
National

                  Qualifications
                  2022

                       2022    Physics

                      Higher   Paper    2

             Finalised   Marking    Instructions

© Scottish Qualifications Authority 2022

These marking instructions have been prepared by examination teams for use by SQA appointed markers
when marking external course assessments.

The information in this document may be reproduced in support of SQA qualifications only on a non-
commercial basis. If it is reproduced, SQA must be clearly acknowledged as the source. If it is to be
reproduced for any other purpose, written permission must be obtained from permissions@sqa.org.uk.

PDF page 2

Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 2; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
General marking principles for Physics Higher

Always assign marks for each candidate response in line with these marking principles, the Physics:
general marking principles (GMPs)
(http://www.sqa.org.uk/files_ccc/Physicsgeneralmarkingprinciples.pdf) and the detailed marking
instructions for this assessment.

(a) Always use positive marking. This means candidates accumulate marks for the demonstration of
    relevant skills, knowledge and understanding; marks are not deducted from a maximum on the
    basis of errors or omissions.

(b) If a specific candidate response does not seem to be covered by either the principles or detailed
    marking instructions, and you are uncertain how to assess it, you must seek guidance from your
    team leader.

(c) Where a candidate incorrectly answers part of a question and carries the incorrect answer
    forward in the following part, award marks if the incorrect answer has then been used correctly
    in the subsequent part or ‘follow-on’. (GMP 17)

(d) Award full marks for a correct final answer (including units if required) on its own, unless a
    numerical question specifically requires evidence of working to be shown, eg in a ‘show’
    question. (GMP 1)

(e) Award marks where a diagram or sketch correctly conveys the response required by the
    question. Clear and correct labels (or the use of standard symbols) are usually required for
    marks to be awarded. (GMP 19)

(f) Award marks for knowledge of relevant relationships alone. When a candidate writes down
    several relationships and does not select the correct one to continue with, for example by
    substituting values, the mark allocated for stating an appropriate relationship is not awarded.
    (GMP 3)

(g) Award marks for the use of non-standard symbols where the symbols are defined and the
    relationship is correct, or where the substitution shows that the relationship used is correct. This
    must be clear and unambiguous. (GMP 22)

(h) Do not award marks if a ‘magic triangle’ (eg) is the only statement in a candidate’s
    response. To gain the mark for the relationship, the correct relationship must be stated, for
                    V
    example V = IR or R = . (GMP 6)
                    I
(i) In rounding to an expected number of significant figures, award the mark for correct answers
    that have up to two figures more or one figure less than the number in the data with the fewest
    significant figures. (GMP 10)
    (Note: the use of a recurrence dot, eg 0.6, would imply an infinite number of significant figures
    and would therefore not be acceptable.)

(j) Award marks where candidates have incorrectly spelled technical terms, provided that responses

    can be interpreted and understood without any doubt as to the meaning. Where there is
    ambiguity, do not award the mark. Two specific examples of this would be when the candidate
    uses a term that might be interpreted as ‘reflection’, ‘refraction’ or ‘diffraction’ (for example
    ‘defraction’), or one that might be interpreted as either ‘fission’ or ‘fusion’ (for example
    ‘fussion’). (GMP 25)

                                page 02

PDF page 3

Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 3; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(k) Only award marks for a valid response to the question asked. Where candidates are asked to:

    • identify, name, give, or state, they need only name or present in brief form.
    • describe, they must provide a statement or structure of characteristics and/or features.
    • explain, they must relate cause and effect and/or make relationships between things clear.

    • determine or calculate, they must determine a number from given facts, figures or
      information.
    • estimate, they must determine an approximate value for something.
    • justify, they must give reasons to support their suggestions or conclusions. For example this
      might be by identifying an appropriate relationship and the effect of changing variables.
    • show that, they must use physics [and mathematics] to prove something, for example a given
      value – all steps, including the stated answer, must be shown.

    • predict, they must suggest what may happen based on available information.
    • suggest, they must apply their knowledge and understanding of physics to a new situation. A
      number of responses are acceptable: award marks for any suggestions that are supported by
      knowledge and understanding of physics.
    • use their knowledge of physics or aspect of physics to comment on, they must apply their
      skills, knowledge and understanding to respond appropriately to the problem/
      situation presented (for example by making a statement of principle(s) involved and/or a
      relationship or equation, and applying these to respond to the problem/situation). Candidates
      are given credit for the breadth and/or depth of their conceptual understanding.

Standard three marker
The examples over the page set out how to apportion marks to answers requiring calculations. These
are the ‘standard three marker’ type of questions.

Award full marks for a correct answer to a numerical question, even if the steps are not shown
explicitly, unless it specifically requires evidence of working to be shown.
For some questions requiring numerical calculations, there may be alternative methods
(eg alternative relationships) that would lead to a correct answer.
Sometimes, a question requires a calculation that does not fit into the ‘standard three marker’ type of
response. In these cases, the detailed marking instructions will contain guidance for marking the
question.

When marking partially correct answers, apportion individual marks as shown over the page “Marking
in calculations”.

                                page 03

PDF page 4

Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 4; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(l) Marking in calculations

    Example question
    The current in a resistor is 1·5 amperes when the potential difference across it is 7·5 volts.
    Calculate the resistance of the resistor. (3 marks)

       Example response Mark and comment

     1. V = IR          1 mark: relationship
       7.5 = 1.5R       1 mark: substitution

       R = 5.0 Ω        1 mark: correct answer

     2. 5.0 Ω           3 marks: correct answer
     3. 5.0             2 marks: unit missing

     4. 4.0 Ω           0 marks: no evidence, wrong answer

     5. __ Ω            0 marks: no working or final answer
     6.    V  7.5
        R = =   =4.0 Ω  2 marks: arithmetic error
           I  1.5
     7.    V
        R = =4.0 Ω      1 mark: relationship only
           I
     8.   V
        R=  =__Ω        1 mark: relationship only
           I
     9.    V  7.5
        R = =   = __Ω   2 marks: relationship and substitution, no final answer
           I  1.5
    10.    V  7.5
        R = =   =4.0    2 marks: relationship and substitution, wrong answer
           I  1.5
    11.   V   1.5
        R=  =   =5.0 Ω  1 mark: relationship but wrong substitution
           I  7.5
    12.   V   75
        R=  =   =5.0 Ω  1 mark: relationship but wrong substitution
           I 1.5
    13.    I  1.5
        R=  =   =5.0 Ω  0 marks: wrong relationship
          V   7.5
    14. V = IR
       7.5 = 1.5 × R
       R = 0.2 Ω        2 marks: relationship and substitution, arithmetic error
    15. V = IR
           I  1.5
        R=  =   =0.2 Ω  1 mark: relationship correct but wrong rearrangement of
          V   7.5
                               symbols

                                page 04

PDF page 5

Paper 2, Question 1
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 5; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Marking Instructions for each question

                                        Max
   Question       Expected response               Additional guidance
                                       mark
1.  (a) (i) uₕ =17.0cos24.0              1  Accept: 16, 15.53, 15.530
        (A)
            uₕ =15.5 ms⁻¹           (1)
        (i) uᵥ =17.0sin24.0              1  Accept: 6.9, 6.915, 6.9145
        (B)
            uᵥ =6.91 ms⁻¹           (1)
        (ii) s =vt                  (1)  2  SHOW question

            11=15.5×t               (1)
                                            Accept:
             t =0.71 s                       s=vt
                                             s=ut
                                             d =vt
                                             d =vt

                                                  1
                                             s=ut+ at² (with a=0)
                                                  2
                                               1
                                             s=  (u+v)t (with u =v)
                                               2
                                            Alternative method: (as ball is at its
                                            maximum height)
                                             v =u+at (u and a must have
                                            opposite signs)

                                page 05

PDF page 6

Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 6; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question       Expected response               Additional guidance
                                      mark
1.     (iii)     1                      3  OR consistent with (a)(i)(B)
            s =ut+ at²             (1)
                 2
                      1                    Accept: 2, 2.44, 2.436
            s =6.91×0.71+ ×−9.8×0.71² (1)
                      2
                                           Alternative methods:
            s =2.4 m               (1)
                                            v² =u² +2as
                                            0² =6.91² +2×−9.8×s
                                            s =2.4 m
                                           Accept: 2, 2.44, 2.436 for this
                                           method.
                                              1
                                            s= (u+v)t
                                              2
                                              1
                                            s= ×(6.91+0)×0.71
                                              2
                                            s=2.5 m
                                           Accept: 2, 2.45, 2.453 for this
                                           method.
   (b)     under                   (1)  2  JUSTIFY question
           The ball has a smaller (initial) Accept: below
           vertical (component of) velocity (so
           never reaches the same height). (1) Accept: speed instead of velocity

                               page 06

PDF page 7

Paper 2, Question 2
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 7; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
2.  (a) (i) v² =u² +2as            (1)   3  Accept: -0.1, -0.141, -0.1408
            0² =0.78² +2×a×2.160   (1)
                                            Accept ‘0.14 m s⁻² to the left’
             a=−0.14 m s⁻²         (1)
                                            a must be opposite sign from u and s
                                            Alternative methods:
                                            Both relationships (1)
                                            Both substitutions (1)
                                            Final answer   (1)

                                            Do not accept ‘a= —0.14 m s⁻² to the
                                            left’

        (ii) F =ma                 (1)   3  OR consistent with (a)(i)

             F =0.350×(−)0.14      (1)
                                            Accept: 0.05, 0.0490, 0.04900
             F =(−)0.049 N         (1)
                                            In this question, ignore negative
                                            signs in both the substitution and
                                            final answer for force.
                                            Alternative method:
                                                1
                                             Fd = mv²
                                                2
                                                     1
                                             F×2.160= ×0.350×0.78²
                                                     2
                                            F = 0.049 N
                                            Both relationships (1)
                                            Both substitutions (1)
                                            Final answer   (1)
                                            Accept: 0.05, 0.0493, 0.04929
                                            for this method.
    (b)     Mass does not have the largest 1 Accept:
            percentage uncertainty.         ‘%’ for percentage
                                            ‘fractional’ for percentage
            OR
                                            Absolute uncertainty on its own,
            Initial speed has largest percentage (0) marks.
            uncertainty.

                                page 07

PDF page 8

Paper 2, Question 3
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 8; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
3.  (a) (i)  Δmv=mv−mu             (1)   3  Accept: 0.4, 0.350, 0.3500
             Δmv=(0.25×1.80)−(0.25×0.40) (1)
                                            Accept:
             Δmv=0.35 kg m s⁻¹     (1)       ∆p=m∆v
                                             Ft =mv−mu
                                             p=mv

                                            Do
                                             p=ⁿ^{o}m^{t}v^{a}−^{c}^{c}m^{e}u^{p}^{t}–^{:} 0 marks

                                            For alternative methods:
                                            Acceptable relationship (1)
                                            all substitutions including
                                            subtraction         (1)
                                            Final answer        (1)

                                            Sign convention must be consistent
                                            within this part of the question.
                                            v and u must have same sign.

                                            Accept N s

        (ii) Ft =mv−mu             (1)   3  OR consistent with (a)(i)
            6.25×t =0.35           (1)
                                            Accept: 0.06, 0.0560, 0.05600
            t =0.056 s             (1)

                                            Alternative method:
                                             F =ma

                                             6.25=0.25×a
                                             v=u+at
                                                      (   )
                                                      6.25
                                            1.80=0.40+    ×t
                                                      0.25
                                            t =0.056 s
                                            Both relationships (1)
                                            Both substitutions (1)
                                            Final answer   (1)

                                page 08

PDF page 9

Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 9; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
3.  (b)     (total momentum before = total 3 Accept: -0.3, -0.300, -0.3000
            momentum after)
                                            Equating the total momenta before
            mₓuₓ +m_{y}u_{y} =mₓvₓ +m_{y}v_{y} (1) and after      (1)
                                            All substitutions     (1)
            (0.50×0.40)+(0.25×0.40)
                                            Final answer          (1)
            =(0.50vₓ)+(0.25×1.80)  (1)
                                            Sign convention must be consistent.
            vₓ =−0.30 m s⁻¹        (1)
                                            Do not accept:
            OR
                                            ‘v = —0.30 m s⁻¹ to the left’
                                              x
            (mₓ +m_{y})u =mₓvₓ +m_{y}v_{y} (1)
                                            Alternative methods:
            (0.50+0.25)×0.40
                                             Δmv=mv−mu
            =(0.50vₓ)+(0.25×1.80)   (1)
                                             −0.35=(0.50v)−(0.50×0.40)
            vₓ =−0.30 m s⁻¹         (1)
                                             v=−0.30 m s⁻¹
                                            Δmv and u must have opposite signs
            (Accept ‘0.30 m s⁻¹ to the left’)
                                             Ft =mv−mu
                                             −6.25×0.056
                                             =(0.50v)−(0.50×0.40)
                                             v=−0.30 m s⁻¹
                                            F and u must have opposite signs
                                             F =ma
                                             −6.25=0.50×a
                                             v=u+at
                                                    (    )
                                                     −6.25    
                                             v=0.40+     ×0.056
                                                     0.5      
                                             v=−0.30 m s⁻¹
                                            F and u must have opposite signs
                                            Both relationships (1)
                                            Both substitutions (1)
                                            Final answer   (1)

                                page 09

PDF page 10

Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 10; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
3.  (c)     Calculate/compare the total kinetic 2 Accept: Eₖfor ‘kinetic energy’.
            energy before and (total kinetic
            energy) after.          (1)     Look for a statement relating to
                                            calculating/finding the total E
                                            before and after first, otherwis^{k}e (0)
                                            marks.
            If (total) kinetic energy before is
            equal to (total) kinetic energy after, There must be an indication of total
            the interaction is elastic. (1) kinetic energy or equivalent term.
            OR                              Accept:
                                            Can show by calculation but would
            If (total) kinetic energy is conserved, still require a statement for the
            the interaction is elastic.     second mark.

                                            Do not accept:
                                            If (total) kinetic energy is not
                                            conserved, the interaction is
                                            inelastic, on its own.

    (d) (i) Photovoltaic (effect)        1

        (ii) Electrons gain/absorb energy from 3 Look for reference to both
            photons/light           (1)     conduction and valence band first,
                                            otherwise (0) marks.
            Electrons move from valence band to
            conduction band         (1)     Bands must be named correctly,
                                            e.g. do not accept ‘valency’ or
            Electrons move towards n-type   ‘conductive’.
            semiconductor (producing a
            potential difference).  (1)     Third statement is dependent on
                                            second statement.

                                            The direction the electrons move
                                            must be clear.

                                page 10

PDF page 11

Paper 2, Question 4
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 11; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response               Additional guidance
                                        mark
4.          Award 3 marks where the candidate 3 Candidates may use a variety of
            has demonstrated a good          physics arguments to answer this
            understanding of the physics     question.
            involved. They show a good       Award marks based on candidates
            comprehension of the physics of the demonstrating overall good,
            situation and provide a logically reasonable, limited, or no
            correct answer to the question posed. understanding.
            This type of response might include a
            statement of the principles involved,
            a relationship or an equation, and the
            application of these to respond to the
            problem. The answer does not need
            to be ‘excellent’ or ‘complete’ for
            the candidate to gain full marks.
            Award 2 marks where the candidate
            has demonstrated a reasonable
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood the problem.
            Award 1 mark where the candidate
            has demonstrated a limited
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood at least a little of the
            physics within the problem.
            Award 0 marks where the candidate
            has not demonstrated an
            understanding of the physics
            involved. There is no evidence that
            they have recognised the area of
            physics involved, or they have not
            given any statement of a relevant
            physics principle. Award this mark
            also if the candidate merely restates
            the physics given in the question.

                                page 11

PDF page 12

Paper 2, Question 5
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 12; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response               Additional guidance
                                        mark
5.  (a)     When moving away from the    2   Look for reference to
            students:                        wavefronts/wavelengths/waves
            Statement that there are fewer   first, otherwise (0) marks.
            wavefronts per second
            OR
            The wavefronts are further apart
                                    (1)
            When moving towards the students:
            Statement that there are more
            wavefronts per second
            OR
            The wavefronts are closer together
                                    (1)
            OR

            diagram showing wavefronts closer In a diagram, there must be an
            together ahead of the buzzer (1) implication of direction of travel.
            and further apart behind it. (1)

            or any similar response

    (b) (i)    λₒ_{b}ₛₑᵣᵥ −λᵣₑₛₜ         3   Accept: 0.05, 0.0517, 0.05172
             z =   ed               (1)
                   λᵣₑₛₜ
                                                λₒ_{b}ₛₑᵣ −λᵣₑₛₜ
                                              z =   ved
               610×10⁻⁹ −580×10⁻⁹
             z =                    (1)             λᵣₑₛₜ
                   580×10⁻⁹
                                                610−580
             z =0.052               (1)       z =
                                                  580
                                              z =0.052
        (ii)      v                      5   OR consistent with (b)(i)
                z =                 (1)
                  c
                                             Accept: 7, 6.78, 6.783
                     v
            0.052=                  (1)
                  3.00×10⁸                      v
                                              z =   relationship anywhere (1)
                                                c
                                              v=H₀d relationship anywhere (1)
                v= H₀d              (1)
            0.052×3.00×10⁸ =2.3×10⁻¹⁸×d (1)
                d =6.8×10²⁴m        (1)
    (c) (i)      m₁m₂                    3   Accept: 2.2, 2.222, 2.2219
             F =G                   (1)
                  r²
                      2.19×10³⁰ ×1.80×10³⁰
             F =6.67×10⁻¹¹×         (1)
                         (3.44×10¹²)²
             F =2.22×10²⁵ N         (1)
        (ii) (Force is) four (times greater). 1

                                page 12

PDF page 13

Paper 2, Question 6
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 13; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response                Additional guidance
                                        mark
6.  (a)     Meson(s)                     1
    (b) (i) Anti-up                      1   Both required

            strange                          Do not accept: anti anti-strange

        (ii) Weak (nuclear force)        1

    (c) (i)   d =vt                 (1)  3   Accept: 1.1, 1.053, 1.0526
            30.0 =(0.95 × 3.00×10⁸) × t (1)

               t = 1.05 × 10⁻⁷ s    (1)

        (ii)                             3   Accept: 9.4, 9.367, 9.3675
                   v²
            l^{'} = l 1−            (1)
                    
                   c
                                             Accept:
                      0.95c²
            l^{'} = 30.0 1−         (1)
                        c                 l^{'} = 30.0 1−(0.95)²
            l^{'} = 9.37 m          (1)
    (d)     For a stationary observer’s frame of 1 The response must involve a
            reference, the mean lifetime of the statement referring to, or
            pion is greater (than 26 ns)     implying, a frame of reference.
            OR
            In a pion’s frame of reference, the
            distance is shorter (than 30.0 m).

                                page 13

PDF page 14

Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 14; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
6.  (e)     Award 3 marks where the candidate 3 Candidates may use a variety of
            has demonstrated a good         physics arguments to answer this
            understanding of the physics    question.
            involved. They show a good      Award marks based on candidates
            comprehension of the physics of the demonstrating overall good,
            situation and provide a logically
                                            reasonable, limited, or no
            correct answer to the question
                                            understanding.
            posed. This type of response might
            include a statement of the principles
            involved, a relationship or an
            equation, and the application of
            these to respond to the problem.
            The answer does not need to be
            ‘excellent’ or ‘complete’ for the
            candidate to gain full marks.
            Award 2 marks where the candidate
            has demonstrated a reasonable
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood the problem.
            Award 1 mark where the candidate
            has demonstrated a limited
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to the
            situation, showing that they have
            understood at least a little of the
            physics within the problem.
            Award 0 marks where the candidate
            has not demonstrated an
            understanding of the physics
            involved. There is no evidence that
            they have recognised the area of
            physics involved, or they have not
            given any statement of a relevant
            physics principle. Award this mark
            also if the candidate merely restates
            the physics given in the question.

                                page 14

PDF page 15

Paper 2, Question 7
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 15; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
7.  (a)     Protons are (positively) charged (1) 2 Must state protons are charged
                                            otherwise, maximum (1) mark.
            Protons experience a force (in the
            electric field)         (1)     Any mention of protons being
                                            negatively charged or uncharged –
                                            award (0) marks.
                                            Charged particles experience a
                                            force, on its own, award (1) mark.

    (b) (i)     1                        2  SHOW question
             Eₖ = mv²               (1)
                2
                1
             Eₖ = ×1.673×10⁻²⁷ ×(3.8×10⁵)² (1)
                2
             Eₖ =1.2×10⁻¹⁶ J
        (ii) W =QV                  (1)  3  Accept: 4, 4.48, 4.480
            W =1.60×10⁻¹⁹ × 2.8×10³ (1)
            W = 4.5×10⁻¹⁶ J         (1)

        (iii)        −                   4  OR consistent with (b)(ii)
             Eₖ =1.2×10 ¹⁶ + 4.5×10⁻¹⁶ (1)
            (Eₖ =5.7×10⁻¹⁶ J)               Accept: 8, 8.25, 8.255

                                                1
                 1                           Eₖ = mv² anywhere (1)
             Eₖ = mv²              (1)          2
                2
                                            Must attempt addition of kinetic
            (1.2×10⁻¹⁶ + 4.5×10⁻¹⁶)
                                            energy and work done, otherwise
                 1                          maximum (1) mark.
               =   ×1.673×10⁻²⁷ × v² (1)
                 2
                                            Demonstrated arithmetic mistake
              v=8.3×10⁵ m s⁻¹      (1)
                                            can be carried forward through the
                                            response.
                                            If using 4.48 × 10⁻¹⁶ (J),
                                            accept: 8, 8.2, 8.24, 8.240
    (c)                                  2  MUST JUSTIFY
            No effect               (1)     Look for this statement first – if
                                            incorrect or missing then (0) marks.
            Work done is the same           charge and potential difference are
            OR                              unchanged, on its own, is
            gain in kinetic energy is the same (1) insufficient for second mark.
                                            Any mention of magnetic field/force
                                            on its own is insufficient for second
                                            mark.

                                page 15

PDF page 16

Paper 2, Question 8
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 16; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
8.  (a) (i) (     )                      4  Accept: 0.01, 0.0120, 0.01202
             A=πr²
             A=π×(15×10⁻³)²         (1)     The use of 3.14 is acceptable for π.
                                            For use of 3.14, accept: P = 0.01201
                P
             I =                    (1)         P
                A                            I =  anywhere  (1)
                                                A
                    P
            17 =                    (1)
                π×(15×10⁻³)²                If no attempt to calculate area,
                                            maximum (1) mark for irradiance
             P=0.012 W              (1)
                                            relationship.
        (ii) (Experimental setup is) not a point 1 Accept: The beam of light does not
            source                          diverge
            OR
                                            Sodium lamp is not a point source,
            Parallel beam so the irradiance does on its own – award (0) marks.
            not change with distance.
    (b) (i) Lower (energy level)         1
        (ii) v= fλ                 (1)   5  Accept: 3.4, 3.377, 3.3769

            3.00×10⁸ = f ×589.0×10⁻⁹ (1)

                                            Accept:
                                             ∆E =hf
             E =hf                 (1)
                                            OR
                         3.00×10⁸ 
             E =6.63×10⁻³⁴×
                                
                                   (1)
                                             E₂−E₁=hf
                        589.0×10⁻⁹ 
             E =3.38×10⁻¹⁹ J       (1)       v= fλ anywhere  (1)
                                             E =hf anywhere  (1)
                                            Alternative method:
                                                  hc
                                             (Δ)E =
                                                  λ
                                            OR
                                                   hc
                                             E₂ −E₁ =
                                                    λ
                                            Combined relationship (2)
                                            Substitution for c and λ (1)
                                            Substitution for h (1)
                                            Final answer      (1)

                                page 16

PDF page 17

Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 17; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
8.  (b) (iii) There are more electrons (per 2 Do not accept greater brightness due
            second) making the transition for the to greater frequency/energy of the
            589.0 nm line.          (1)     photons.

            Meaning more photons (per second)
            are emitted.            (1)

            OR

            There are fewer electrons (per
            second) making the transition for the
            589.6 nm line.          (1)

            Meaning fewer photons (per second)
            are emitted.            (1)

                                page 17

PDF page 18

Paper 2, Question 9
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 18; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
9.  (a)     (f =) 7.0 × 10¹⁴ Hz          1  Accept: 7 × 10¹⁴ Hz
             0
                                            Accept: 6.9 × 10¹⁴ - 7.1 × 10¹⁴ Hz
    (b)      E =hf₀                (1)   4  OR consistent with (a)
             E =6.63×10⁻³⁴×7.0×10¹⁴ (1)
                                            Accept: 5, 4.64, 4.641
             E =4.6×10⁻¹⁹ (J)      (1)
                                            If calcium is correctly identified with
            Calcium/Ca             (1)      no calculation, maximum (1) mark.

                                            If there is a calculation with a value
                                            consistent with (a), then the metal
                                            chosen must be consistent with their
                                            calculation. If this calculated value
                                            does not match a value in the table,
                                            then maximum (3) marks.

                                            A unit is not required but, if a unit is
                                            given, it must be correct. If a
                                            candidate completes a calculation
                                            but does not go on to identify a
                                            metal, then a unit is required.
                                            In this question, if an incorrect
                                            metal or no metal identified,
                                            maximum (3) marks.

                                            Accept:
                                             E =hf

                                            Alternative method:
                                                  E =hf₀            (1)
                                             4.6×10⁻¹⁹ =6.63×10⁻³⁴× f₀ (1)

                                                  f₀ =6.9×10¹⁴ (Hz) (1)
                                             Therefore calcium      (1)

                                            Accept: 7, 6.94, 6.938

                                            Where more than one calculation is
                                            shown all substitutions must be
                                            correct for substitution mark,
                                            and all calculated values must be
                                            correct for calculated value mark.

                                            Accept: Eₖ =hf −hfₒ    (1)
                                            Substituted values must be
                                            consistent with the line or the table,
                                            depending on the method chosen.

                                page 18

PDF page 19

Paper 2, Question 10
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 19; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response               Additional guidance
                                        mark
10. (a)     (The sound waves from the    1   Accept: constant phase difference
            loudspeakers have a) constant phase
            relationship (and have the same  ‘In phase’ is not sufficient.
            frequency, wavelength, and velocity).
    (b)     Waves meet in phase.         1   Accept: peak for crest.

            OR
                                             Can be shown by diagram e.g.
            Crest meets crest.
            OR
            Trough meets trough.
            OR
                                             Diagram must imply addition of two
            Path difference = mλ             waves in phase.

                                             Do not accept: ‘join’ or ‘merge’
                                             alone.

    (c)     path difference = mλ    (1)  4   Accept: 4.8, 4.800, 4.8000
            path difference = 3 × 0.400 (1)

                                             OR
            path difference = L P − L P       L P − L P = mλ
                         2   1                 2   1
               (3 × 0.400) = 6.00 −L P (1)   6.00 − L P = 3 × 0.400
                              1                    1
                     L P = 4.80 m   (1)           L P = 4.80 m
                     1                             1
                                             An indication that
                                             path difference = m λ (1)
                                             Substitution for m and λ (1)
                                             Equate path difference to 6 – L₁P
                                                                   (1)
                                             Final answer          (1)
    (d)     Destructive (interference)   1   Do not accept: deconstructive

                                page 19

PDF page 20

Paper 2, Question 11
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 20; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
11. (a)        sinθ₁                     3  Accept: 62, 62.21, 62.211
            n=                     (1)
               sinθ₂
                                            Accept:
                  sinθ₁
            1.47 =                 (1)        n₂  sinθ₁
                 sin37.0                        =           (1)
                                              n₁  sinθ₂
            θ₁=62.2                (1)
                                             1.47  sinθ₁
                                                =           (1)
                                              1   sin37.0
                                               θ₁ =62.2     (1)
    (b)           1                      3  Accept: 43, 42.86, 42.865
            sinθ_{c} =              (1)
                  n
                   1
            sinθ_{c} =              (1)
                  1.47
            θ_{c} =42.9             (1)
    (c)     (point) P               (1)  2  Look for this statement first – if
                                            incorrect or missing then (0) marks.
            The (absolute) refractive index of
            the vegetable oil (for this light) is Indication of point P being selected
            the same as the (absolute) refractive on the diagram can be accepted as
            index of the glass (therefore there is an alternative for a statement.
            no refraction/change in speed/
            wavelength/direction).  (1)     Accept:
                                            The refractive indices/indexes are
                                            the same.
                                            The refractive index is the same.
                                            The (value of) refractive index has
                                            not changed.

                                page 20

PDF page 21

Paper 2, Question 12
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 21; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
12. (a)     The energy gained by/supplied to 1 Accept: ‘number of joules’ for
            1 coulomb (of charge passing    energy
            through the battery).
                                            Accept: ‘unit charge’ for 1 coulomb.
    (b) (i) 6.0 V                        1  Accept: 6 V

                                            Accept: 5.95 - 6.05 V

        (ii)   y₂ − y₁                 3  Accept: 8, 8.00, 8.000
            m=      
               x₂ −x₁                     Gradient = r is wrong physics,
                                            award (0) marks.
                2.0−4.0
            m=                     (1)      substitution of any valid pair of
               0.50−0.25
                                            points into gradient formula (1)
            m=−8.0                 (1)      accept any point on a correctly
                                            extrapolated line e.g. (0.00,6.0)
            (m=−r)
                                            calculated value of gradient (1)
            r =8.0 Ω               (1)
                                            Alternative method:
                                             E =V +Ir               (1)
                                            6.0=2.0+0.50×r          (1)

                                             r =8.0 Ω               (1)

                                            If using this method, must use data
                                            from the line.
                                            Or value of E consistent with (b)(i)

    (c)     Open the switch, and take the 1 Accept:
            reading on the voltmeter (which is
                                            reading on the voltmeter for an open
            the EMF)
                                            circuit
                                            OR
                                            reading on voltmeter before closing
                                            switch
    (d)     (As resistance decreases,) current 2 If there is wrong physics in the
            increases               (1)     answer, award (0) marks.
            Lost volts increases, (terminal
            potential difference decreases) (1)

    (e)     The line drawn can be extrapolated 2
            to intercept y-axis at less than 6.0 V
                                    (1)

            Passably straight line of same
            gradient                (1)

                                page 21

PDF page 22

Paper 2, Question 13
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 22; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response               Additional guidance
                                        mark
13. (a)     (Close the switch and) take readings 2
            on voltmeter at (regular) time
            intervals               (1)
            Plot a graph of voltage against time
                                    (1)
    (b) (i)     1                        3   Accept: 3, 3.38, 3.384
             E = CV²                (1)
                2
                                             Alternative methods:
                1
             E = ×47×10⁻⁶×12²       (1)
                                             Both relationships (1)
                2
                                             Both substitutions (1)
             E =3.4×10⁻³ J          (1)
                                             Final answer   (1)
        (ii) Increase the supply voltage 1   Must clearly indicate the supply
                                             voltage is increased/greater.
                                             If a value is given for the supply
                                             voltage then it must be greater
                                             than 12 V and less than or equal to
                                             15 V.
                                             Accept:
                                             ‘increase the voltage supplied to
                                             the circuit’.
                                             ‘increase the voltage supplied to
                                             the capacitor’.
                                             Do not accept:
                                             ‘increase the voltage across the
                                             capacitor’ on its own.
                                             Do not accept: any implication of
                                             power supply being replaced by
                                             another power supply.

                                page 22

PDF page 23

Paper 2, Question 14
Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 23; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
14. (a)     Appropriate labels and units (1) 3 Allow for axes starting at zero, or
                                            broken axes, or at an appropriate
            Suitable scales         (1)     value.
            Plotting and line of best fit (1) Accuracy of plotting should be
                                            easily checkable with the scale
                                            chosen.

                                            An origin is not essential and can be
                                            implied by a suitable linear scale.
                                            If the origin is shown, the scale
                                            must either be continuous or the
                                            axis must be ‘broken’. Otherwise
                                            maximum (2) marks.
                                            An appropriate scale must be linear
                                            over the range of the data.

                                            Accept: graph of L against T².

    (b)        y₂ − y₁                 2  Must be consistent with graph drawn
            m=                            for (a).
                x₂ −x₁
                    
                                            Candidates are asked to calculate
                                            the gradient of their graph.
                 4−2
            m=        (for example) (1)
               0.96−0.48                    Tolerance required depending upon
                                            best fit line drawn by the candidate.
            m=4.2 (s² m⁻¹)          (1)
                                            If candidates use values from the
                                            table, these points must lie on their
                                            line.
                                            A unit is not required in the final
                                            answer, but if stated it must be
                                            correct.
                                            If candidate has a non-linear scale
                                            over the range of the values used in
                                            the substitution, (0) marks.

                                            If candidate has drawn a ‘dot to dot’
                                            graph or no line, (0) marks.

                                page 23

PDF page 24

Original 2022 Higher Physics - Paper 2 marking instructions, PDF page 24; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
14. (c)      T²  4π²                     2  Must be consistent with (b)
            (  =    =gradient)
              L   g
                                            Must substitute the gradient of their
                                            graph, and not a single data point.
             4π²
                =4.2                (1)     If a single data point is substituted
             g                              into in the calculation, award (0)
                                            marks.
             g =9.4 N kg⁻¹          (1)     The use of 3.14 is acceptable for π.
                                            Accept m s⁻².

                                            If a candidate has plotted L against
                                            T², this becomes

                                              L   g
                                             (  =   =gradient)
                                             T²  4π²
                                             g
                                                =0.24               (1)
                                             4π²
                                             g =9.5 N kg⁻¹          (1)

                       [END OF MARKING INSTRUCTIONS]

                                page 24