2025 Higher Chemistry - Paper 2 marking instructions

Source: Scottish Qualifications Authority (SQA) / Qualifications Scotland. This is a StemInteract HTML companion, not an official HTML edition. Selectable text is supplied alongside original page images. Use the images or original PDF for equations, powers, fractions, vector notation, tables and diagrams; text extraction cannot fully preserve mathematical layout.

Jump to a question

PDF page 1

Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 1; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
National

                   Qualifications
                   2025

                      2025   Chemistry

                     Higher    – Paper   2

  Question     Paper   Finalised   Marking    Instructions

© Scottish Qualifications Authority 2025

These marking instructions have been prepared by examination teams for use by SQA appointed
markers when marking external course assessments.

The information in this document may be reproduced in support of SQA qualifications only on a non-
commercial basis. If it is reproduced, SQA must be clearly acknowledged as the source. If it is to be
reproduced for any other purpose, written permission must be obtained from permissions@sqa.org.uk.

                                                                    ©

PDF page 2

Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 2; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
General marking principles for Higher Chemistry

Always apply these general principles. Use them in conjunction with the detailed marking
instructions, which identify the key features required in candidates’ responses.

(a) Always use positive marking. This means candidates accumulate marks for the
    demonstration of relevant skills, knowledge and understanding; marks are not deducted for
    errors or omissions.

(b) If a candidate response does not seem to be covered by either the principles or detailed
    marking instructions, and you are uncertain how to assess it, you must seek guidance from
    your team leader.

(c) Do not award half marks.

(d) Where a candidate makes an error at an early stage in a multi-stage calculation, award
    marks for correct follow-on working in subsequent stages, unless the error significantly
    reduces the complexity of the remaining stages. Apply the same principle for questions
    that require several stages of non-mathematical reasoning. The exception to this rule is
    where the marking instructions for a numerical question assign separate ‘concept marks’
    and an ‘arithmetic mark’. In such situations, the marking instructions will give clear
    guidance on the assignment or partial marks.

(e) Unless a numerical question specifically requires evidence of working to be shown, award
    full marks for a correct final response (including units) on its own.

(f) Candidates may fully access larger mark allocations whether their responses are in
    continuous prose, linked statements, or a series of developed bullet points.
(g) Do not deduct marks for inaccurate or unconventional spelling or vocabulary as long as the
    meaning of the word(s) is conveyed. For example, responses that include ‘distilling’ for
    ‘distillation’, or ‘it gets hotter’ for ‘the temperature rises’, are acceptable.

(h) In many questions, the unit in which the answer is to be expressed is given. In these
    questions, the candidate does not need to state a unit in their answer; but if they do, the
    unit must be correct. The full mark allocation cannot be awarded if an incorrect unit is
    shown. In these questions, incorrect units would only be penalised once in any paper.

(i) If a correct response is followed by a wrong response, award no marks. For example in
    response to the question, ‘State the colour seen when blue Fehling’s solution is warmed
    with an aldehyde’, do not award marks for the response ‘red green’. However, if a correct
    response is followed by additional information which does not conflict with that, ignore
    the additional information, whether correct or not. For example in response to a question
    concerned with melting point, ‘State why the tube should not be made of copper’, the
    response ‘Copper has a low melting point and is coloured grey’ would gain marks.

(j) Award full marks for the correct response to a calculation without working. Award partial
    marks, as shown in the detailed marking instructions, when working is given but the final
    response is incorrect. An exception is when candidates are asked to ‘Find, by calculation’ -
    do not award full marks for the correct response without working.

(k) Ignore the omission of one H atom from a full structural formula provided the bond is
    shown.

(l) Award marks for a symbol or correct formula in place of a name unless stated otherwise
    in the detailed marking instructions.

                                page 02

PDF page 3

Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 3; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(m) When formulae of ionic compounds are given as responses, candidates only need to show
    ion charges if these have been specifically asked for. However, if ion charges are shown,
    they must be correct. If incorrect charges are shown, do not award marks.

(n) If an answer comes directly from the text of the question, do not award marks. For
    example, in response to the question, ‘A student found that 0·05 mol of propane, C₃H₈
    burned to give 82·4 kJ of energy. C₃H₈(g) + 5O₂(g) → 3CO₂(g) + 4H₂O(ℓ). Name the kind of
    enthalpy change that the student measured’, do not award marks for ‘burning’ since the
    word ‘burned’ appears in the text.

(o) A guiding principle in marking is to give credit for correct elements of a response rather
    than to look for reasons not to give marks.

    Example 1: The structure of a hydrocarbon found in petrol is shown below.

    Name the hydrocarbon
    • Award the full mark for ‘3, methyl-hexane’, although the punctuation is not correct.

    Example 2: A student measured the pH of four carboxylic acids to find out how their
    strength is related to the number of chlorine atoms in the molecule. The results are
    shown.

      CH₃COOH        1.65

      CH₂ClCOOH      1.27

      CHCl₂COOH      0.90
      CCl₃COOH       0.51

    Describe the relationship between the number of chlorine atoms in the molecule and the
    strengths of the acids.
    • Award the full mark for a response such as ‘the more Cl₂, the stronger the acid’,
      although not completely correct.

(p) Unless the question is clearly about a non-chemistry issue, for example costs in an
    industrial chemical process, do not award marks for a non-chemical response.
    For example, in response to the question, ‘Why does the (catalytic) converter have a
    honeycomb structure?’, do not award a mark for ‘To make it work’. This response may be
    correct but it is not a chemical response.

                                page 03

PDF page 4

Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 4; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(q) Only award marks for a valid response to the question asked. Where candidates are asked
    to:
    • identify, name, give or state, they must only name or present in brief form.
    • describe, they must provide a statement or structure of characteristics and/or
      features.
    • explain, they must relate cause and effect and/or make relationships between things
      clear.
    • compare, they must demonstrate knowledge and understanding of the similarities
      and/or differences between things.
    • complete, they must finish a chemical equation or fill in a table with information.
    • determine or calculate, they must determine a number from given facts, figures or
      information.

    • draw, they must draw a diagram or structural formula, for example ‘Draw a diagram to
      show the part of a poly(propene) molecule formed from two propene molecules.’
    • estimate, they must determine an approximate value for something.
    • predict, they must suggest what may happen based on available information.
    • evaluate, they must make a judgement based on criteria.
    • suggest, they must apply their knowledge and understanding of chemistry to a new
      situation. A number of responses are acceptable: award marks for any suggestions that
      are supported by knowledge and understanding of chemistry.
    • use their knowledge of chemistry or aspect of chemistry to comment on, they must
      apply their skills, knowledge and understanding to respond appropriately to the
      problem/situation presented (for example by making a statement of principle(s)
      involved and/or a relationship or equation, and applying these to respond to the
      problem/situation). Candidates gain marks for the breadth and/or depth of their
      conceptual understanding.
    • write, they must complete a chemical or word equation, for example ‘Write the word
      equation for the complete combustion of ethanol.’

                                page 04

PDF page 5

Paper 2, Question 1
Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 5; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Marking instructions for each question

                                        Max
   Question       Expected response               Additional guidance
                                       mark
1.  (a) (i) Na(g)  Na⁺(g)+ e⁻           1   State symbols must be shown,
                                            negative sign on electron not
                                            required.
        (ii) 1735 (kJ mol⁻¹)            1   No units required. No mark can be
                                            awarded for correct answer if wrong
                                            unit is given (where no unit
                                            required, wrong units would only be
                                            penalised once in any paper). kJ is
                                            acceptable in place of kJ mol−1 (KJ
                                            or Kj or KJ mol−1 or Kj mol−1
                                            accepted).
        (iii) The second ionisation energy (in 2 Correct statements made about the
            sodium) involves removal of an  2ⁿ^{d} ionisation energy/electron of
            electron from an (electron) shell magnesium can also be credited as
            that is inner/full/(more)       long as magnesium is named.
            stable/closer to the nucleus.

            OR
                                            Stating that the 2ⁿ^{d} electron requires
            Second electron is removed from an more energy than the 1^{s}^{t} electron is
            (electron) shell that is        not sufficient on its own.
            inner/full/(more) stable/closer to
            the nucleus.        (1 mark)
                                            Shielding is acceptable in place of
            The second electron is less     screening.
            screened/the second (electron) shell
            is less screened.               Energy level is acceptable in place
                                            of electron shell.
            OR
                                            Increased attraction of the electron
            The second electron is more strongly for the nucleus would be considered
            attracted to/pulled towards the cancelling.
            nucleus.           (1 mark)

        (iv) (They have the same number of 1
            occupied electron shells but) there
            are more protons/increased nuclear
            charge of the Mg²⁺ ion.

                                page 05

PDF page 6

Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 6; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
1.  (b) (i) (Ionic bonds are) the electrostatic 1 Accept reference to a single ionic
            attraction between positive and bond being the electrostatic
            negative ions.                  attraction between a positive ion
                                            and a negative ion.
            OR
            (An ionic bond is) the electrostatic
            attraction between oppositely
            charged ions.

        (ii) 6 bananas (if working shown must be 2 2627.52 (mg) accepted for partial
            correct)                        mark.

            Partial marks

            --------------------------------------------

            Mass of potassium in 7 day dose=
            8 × 7 × 0.0012 × 39.1 = 2.62752 (g)
                                (1 mark)

            Any calculated mass of potassium
            divided by 0.450.   (1 mark)

                                page 06

PDF page 7

Paper 2, Question 2
Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 7; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
2.  (a)                                 2   Covalent lattice is accepted for
                Bonding
                                            (covalent) network.
                metallic
                covalent
                covalent

                covalent
                                (1 mark)

                 Structure

                  lattice
             (covalent) network

                 molecular

                 (discrete)
             molecular/molecule
                                (1 mark)
    (b) (i) (The covalent radius) decreases. 1

        (ii) Argon does not form (covalent) 1 Argon is unreactive/monatomic is
            bonds.                          not accepted on its own.

    (c)     (van der Waals) forces increase/get 3 Mention of increasing/stronger
            stronger (going down the group). covalent/ionic/metallic bonds –
                                (1 mark)    cancels the first mark.

            LDFs are the forces (broken between This mark can only be awarded if no
            the atoms).         (1 mark)    other forces are mentioned (as being
                                            broken).

            The number of electrons increases Mention of (breaking) bonds/forces
            (and so the stronger the forces). b e t w een molecules cancels one
                                (1 mark)    mark.

                                page 07

PDF page 8

Paper 2, Question 3
Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 8; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
3.          Award 1 mark where the candidate 3
            has demonstrated, at an appropriate
            level, a limited understanding of the
            chemistry involved. They have made
            some statement(s) which are
            relevant to the situation, showing
            that they have understood at least a
            little of the chemistry within the
            problem.
            Award 2 marks where the candidate
            has demonstrated, at an appropriate
            level, a reasonable understanding of
            the chemistry involved. They make
            some statement(s) which are
            relevant to the situation, showing
            that they have understood the
            problem.

            Award 3 marks where the candidate
            has demonstrated, at an appropriate
            level, a good understanding of the
            chemistry involved. They show a
            good comprehension of the
            chemistry of the situation and
            provide a logically correct answer to
            the question posed. This type of
            response might include a statement
            of the principles involved, a
            relationship or an equation, and the
            application of these to respond to
            the problem. The answer does not
            need to be ‘excellent’ or ‘complete’
            for the candidate to gain full marks.

            Award 0 marks where the candidate
            has not demonstrated, at an
            appropriate level, an understanding
            of the chemistry involved. There is
            no evidence that they have
            recognised the area of chemistry
            involved, or they have not given any
            statement of a relevant chemistry
            principle. Award this mark also if the
            candidate merely restates the
            chemistry given in the question.

                                page 08

PDF page 9

Paper 2, Question 4
Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 9; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response              Additional guidance
                                       mark
4.  (a) (i)  C₃H₇OH + 4¹₂ O₂→ 3CO₂ + 4H₂O 1  Multiples not accepted.
        (ii) -1050.04 (kJ mol⁻¹)         3   1050.04 (kJ mol⁻¹) (2 marks)

             If incorrect answer given, a    No units required. if wrong unit is
             maximum of two partial marks can given (where no unit required,
             be awarded for demonstration of wrong units would only be penalised
             the two concepts:               once in any paper).

             1 mark for a demonstration of the kJ is acceptable in place of kJ mol⁻¹
             correct use of the relationship (KJ or Kj or KJ mol⁻¹ or Kj mol⁻¹
             Eh = cm∆T as shown by (4.18 × (an accepted).
             order of magnitude 150) × 13.9).
             (ignore units for this mark).

             1 mark for evidence of scaling up of
             a calculated value of energy
             released to one mole. This can be
             demonstrated by:

             • correct scaling of calculated Eh
              from 0.498 to 60 g
             • 0.498 g Eh
               60 g    60 x Eh
                        0.498
             • 0.498 (0.0083) Eh
               60
                       1    X

        (iii) • balance                  2   Bomb calorimeter worth maximum
             • (alcohol) burner              of 1 mark.
             • (copper) can/beaker
             • thermometer
             • measuring cylinder/volume
               measurement
             • clamp stand/tripod/can
               suspension method

             Any four for 2 marks.

             Any two for 1 mark.

        (iv)                             1   Evaporation on its own is not
             Heat/energy loss to the surroundings
                                             sufficient.
             OR
             Incomplete combustion.
             OR
             Evaporation of alcohol/fuel.

    (b) (i)  1:3                         1   Hydrogen:oxygen ratio accepted if
                                             labelled.
             OR
             2:6

                                page 09

PDF page 10

Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 10; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response              Additional guidance
                                       mark
4.  (b) (ii) Acidified (potassium/sodium) 1  Copper(II)oxide without mention of
        (A)  dichromate.                     heating is insufficient for the mark.
             OR

             Hot copper(II)oxide.

        (ii)                             1   Correct structure of
        (B)                                  2-methylpropanoic acid is also
                                             accepted.

        (ii) Butanone/butan-2-one.       1   Structure not accepted.
        (C)
    (c) (i)  Volumetric/standard flask.  1

        (ii) Rinse with sodium hydroxide (before 1
        (A)  filling).

        (ii) 20.4 (cm³)                  1   Units are not required but must be
        (B)                                  correct if given.
                                             (wrong units would only be
                                             penalised once in any paper).

                                page 10

PDF page 11

Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 11; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response              Additional guidance
                                       mark
4.  (c) (ii) 0.08316 (moll⁻¹)            3   Units are not required but must be
        (C)                                  correct if given.
             If incorrect answer given, partial (wrong units would only be
             marks can be awarded using a    penalised once in any paper)
             scheme of two “concept” marks,
             and one “arithmetic” mark.
             1 mark for knowledge of the
             relationship between moles,
             concentration and volume.

             This could be shown by one of the
             following steps:

             Calculation of moles sodium
             hydroxide solution e.g. 0·105 x
             0.0198 = 2.079 x 10⁻³ moles.
             OR

             Calculation of concentration of
             ethanoic acid e.g. 2.079 x 10⁻³ ÷
             0.025
             OR
             Insertion of correct pairings of
             values for concentration and volume
             in a valid titration formula

             If the relationship between moles,
             concentration and volume is used
             more than once, it must be used
             correctly every time.

             1 mark for knowledge of relationship
             between moles of sodium hydroxide
             and ethanoic acid.

             This could be shown by one of the
             following steps:

             Calculation of moles ethanoic acid
             from moles sodium hydroxide i.e.
             calculated moles of sodium
             hydroxide used again to calculate
             concentration of ethanoic acid.
             OR
             Insertion of correct stoichiometric
             values in a valid titration formula.

             1 mark is awarded for correct
             arithmetic through the calculation.

             This mark can only be awarded if
             both concept marks have been
             awarded.

                                page 11

PDF page 12

Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 12; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response              Additional guidance
                                       mark
4.  (c) (iii) CH₃COO⁻K⁺                  1   K⁺CH₃COO⁻ is also acceptable.
        (A)
        (iii) 5.4 (g)                    1   Units are not required but must be
        (B)                                  correct if given.
                                             (wrong units would only be
                                             penalised once in any paper)

                                page 12

PDF page 13

Paper 2, Question 5
Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 13; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
5.  (a)     (Sucrose) is polar due to its hydroxyl 2 (-)OH accepted as hydroxyl.
            groups.
            OR

            (Sucrose) can form hydrogen bonds
            due to its hydroxyl groups.
                               (1 mark)     “Like dissolves like” on its own is not
                                            sufficient for the second mark.
            An explanation which links solubility
            of the molecule (sucrose) to the
            polarity of water/hydrogen bonding
            of water.          (1 mark)

    (b) (i) Tyr-Pro-Phe-Pro-Gly-Pro-Iso. 1

            OR

            Iso-Pro-Gly-Pro-Phe-Pro-Tyr.
        (ii) Essential (amino acid)     1

    (c) (i) Ester(s)                    1   Triglyceride accepted

        (ii) Glycerol/propane-1,2,3-triol 1 propan-1,2,3-triol accepted
        (A)

        (ii) Palmitic acid              1
        (B)
        (iii) Addition                  1   Reduction accepted

    (d) (i) Ethanal                     1

        (ii) Carbonyl                   1
        (iii) Diterpenoid               1
        (A)

        (iii) A correctly circled isoprene unit. 1 Including the OH is not accepted.
        (B)

    (e)     3                           1

                                page 13

PDF page 14

Paper 2, Question 6
Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 14; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
6.  (a)     H₂O₂(aq) + 2H⁺(aq) + 2e⁻ → 2H₂O(ℓ) 1 Ignore state symbols. Charge on
                                            electron not required.
    (b)     2S₂O₃²⁻(aq) + I₂(aq) → S₄O₆²⁻(aq) + 2I⁻ 1 Ignore state symbols.
            (aq)

    (c) (i) 10                          1
        (ii) To keep the concentration (of the 1
            reactants) constant.

            OR

            Adding water will change/affect/
            dilute/decrease the concentration
            (of the reactants).

    (d) (i) (As concentration doubles the rate 1
            of reaction) doubles.

        (ii) 16.129 (s), 16.13(s)       1   Units are not required but must be
                                            correct if given.
                                            (wrong units would only be penalised
                                            once in any paper)
        (iii) The more particles/ions (in a given 2
            volume).            (1 mark)

            More successful collisions (and the
            faster the reaction). (1 mark)

                                page 14

PDF page 15

Paper 2, Question 7
Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 15; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
7.  (a)     1129.4 (kJ mol⁻¹)           2   Retrieval of a fourth bond enthalpy
                                            (ie 360 for CO) is not considered
            Partial marks                   cancelling for the first mark.
            -------------------------------------------- Units not required, but if stated
                                            must be correct. Incorrect units
            Correctly retrieving 3 bond     would only be penalised once per
            enthalpies from data book       paper.
            (243, 804, 338).   (1 mark)
                                            kJ is acceptable in place of kJ mol⁻¹
            Correct manipulation of incorrect (KJ or Kj or KJ mol⁻¹ or Kj mol⁻¹
            bond enthalpies (must include the accepted).
            given ΔH = -107.6 kJ mol⁻¹).
                               (1 mark)

    (b)     (Cooling favours) exothermic 2
            reaction.          (1 mark)

            Cooling below 100 °C removes
            H₂O(g) from equilibrium as H₂O(ℓ)
                               (1 mark)
    (c) (i) 1 mark for workable apparatus 2 Treat each mark and associated
            showing reaction of hydrochloric labels separately.
            acid with calcium carbonate.

            1 mark for showing gas being passed
            through sealed container of sodium
            hydroxide.

        (ii) 16.92/16.9/17(%)           2

            Partial marks

            ---------------------------------------------

            Correct use of atom economy
            relationship without correct use of
            stoichiometry (working must be
            shown).             (1 mark)

            Correct working with no correct
            answer given.       (1 mark)

            Incorrect use of stoichiometry.
            Answer and working must be shown.
                                (1 mark)

            0⋅1692              (1 mark)

                                page 15

PDF page 16

Paper 2, Question 8
Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 16; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
8.  (a) (i) 198.4 (g)                   2
            Partial marks
            --------------------------------------------

            Calculating number of moles of SnO₂
            required (1.316).  (1 mark)

            OR

            Calculating the theoretical mass of
            tin required to produce 100 g at 64%
            yield (156.25).    (1 mark)

            OR

            Calculating mass of SnO₂ required for
            100% yield (126.96). (1 mark)

            OR
            Follow through from an incorrectly
            calculated 100% yield. (1 mark)

        (ii) Carbon is in excess by 0.083 (moles). 2 A maximum of 1 mark can be
                                            awarded if carbon is not stated as
            Partial marks                   being the reactant in excess.

            -------------------------------------------- 1 mark can be awarded for
                                            identification of tin(IV) oxide as the
            Moles of SnO₂ = 0.167 AND moles of reactant in excess if supported by
            C = 0.25            (1 mark)    candidates working.

            OR

            Allow for follow through from
            correctly applying mole ratio and
            subtraction to calculated number of
            moles               (1 mark)

            --------------------------------------------

            By proportion 25.2 2.007 grams
                                (1 mark)

            OR

            Allow for follow through from
            calculated mass of excess carbon
            converted to moles. (1 mark)

                                page 16

PDF page 17

Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 17; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
8.  (a) (iii) 49.92 (g)                 2
            Partial marks
            --------------------------------------------
            Calculating moles of CO₂ (1 mark)

            Correctly applying mole ratio to
            work out a mass for an incorrect
            number of moles.    (1 mark)
            --------------------------------------------
            By proportion 150.7 g 80 litres
                                (1 mark)

    (b) (i) Filtration                  1

        (ii) Seawater is a free/cheap raw 1
            material.

            OR
            Calcium chloride can be sold as a by
            product.

                                page 17

PDF page 18

Paper 2, Question 9
Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 18; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
9.  (a) (i) Propagation                 1
        (ii) An (unpaired) electron     1   Do not accept electrons.

    (b)     Denaturing                  1

    (c)     Cosmetics/food products/plastics 1

    (d) (i) Oxygen/gas is escaping      1
        (ii) Two from:                  2   Either from
            • mass/volume/surface area/size    • type/variety of potato, or
              of potato discs                  • (discs from the) same potato
            • concentration of H₂O₂         Accepted for 1 mark
            • temperature (of H₂O₂or pH
              solution)                     Weight is accepted for mass (of
                                            potato discs).

        (iii) As the pH increases the rate (of 1 Rate must be mentioned.
            reaction) increases up to pH 10/
            reaches a maximum/optimum at pH
            10 (and then decreases).

            OR

            As the pH increases the rate (of
            reaction) increases and then
            decreases.

                                page 18

PDF page 19

Paper 2, Question 10
Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 19; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question          Expected response               Additional guidance
                                            mark
10. (a) (i)                                  1

        (ii) Bromine solution would quickly/rapidly 1
            decolourise with CAP/capsaicin.
            OR

            Bromine solution will decolourise with
            CAP/capsaicin but not with DHC/
            dihydrocapsaicin.
            OR
            Bromine solution will not decolourise with
            DHC/dihydrocapsaicin but will with
            CAP/capsaicin.

    (b)     One from:                        1   An answer referring to a
              •  Capsaicinoids do not dissolve/are named capsaicinoid is
                 (relatively) insoluble in water accepted.
              •  Capsaicinoids are hydrophobic
              •  Capsaicinoids are non-polar     It/they is taken as referring
                                                 to capsaicinoid.

    (c)     135 (s)                          1   2.25 minutes is not accepted
                                                 Sec(s) is not accepted as unit.
    (d)     3(p)                             2   £0.03 is accepted.

                                                 Rounding of the final answer
            Partial marks
                                                 to the nearest correct
            ------------------------------------------------------
                                                 monetary unit.
            Mass of CAP in cream = 0.015 (g).
            OR
            Evidence of a calculated
            mass of CAP × (£)1.93/193(p).
            OR
            60 g of CAP costs £115.82

            OR

            0.025% of a calculated cost of 60 g CAP
            OR
            60 x £48.26
            1000

    (e)     C₆H₈O₆ → C₆H₆O₆ + 2H⁺ + 2e⁻      1   State symbols are not
                                                 required, but if shown must
                                                 be correct. Negative sign on
                                                 electron not required.

                                page 19

PDF page 20

Paper 2, Question 11
Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 20; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
11.         Award 1 mark where the candidate 3
            has demonstrated, at an appropriate
            level, a limited understanding of the
            chemistry involved. They have made
            some statement(s) which are
            relevant to the situation, showing
            that they have understood at least a
            little of the chemistry within the
            problem.
            Award 2 marks where the candidate
            has demonstrated, at an appropriate
            level, a reasonable understanding of
            the chemistry involved. They make
            some statement(s) which are
            relevant to the situation, showing
            that they have understood the
            problem.

            Award 3 marks where the candidate
            has demonstrated, at an appropriate
            level, a good understanding of the
            chemistry involved. They show a
            good comprehension of the
            chemistry of the situation and
            provide a logically correct answer to
            the question posed. This type of
            response might include a statement
            of the principles involved, a
            relationship or an equation, and the
            application of these to respond to
            the problem. The answer does not
            need to be ‘excellent’ or ‘complete’
            for the candidate to gain full marks.

            Award 0 marks where the candidate
            has not demonstrated, at an
            appropriate level, an understanding
            of the chemistry involved. There is
            no evidence that they have
            recognised the area of chemistry
            involved, or they have not given any
            statement of a relevant chemistry
            principle. Award this mark also if the
            candidate merely restates the
            chemistry given in the question.

                                page 20

PDF page 21

Paper 2, Question 12
Original 2025 Higher Chemistry - Paper 2 marking instructions, PDF page 21; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
12. (a)     2,7-dimethyloctane          1
    (b)                                 1   Any correct structure for 4-
                                            methylhex-2-ene

    (c)                                 1

                       [END OF MARKING INSTRUCTIONS]

                                page 21