2024 Higher Chemistry - Paper 2 marking instructions

Source: Scottish Qualifications Authority (SQA) / Qualifications Scotland. This is a StemInteract HTML companion, not an official HTML edition. Selectable text is supplied alongside original page images. Use the images or original PDF for equations, powers, fractions, vector notation, tables and diagrams; text extraction cannot fully preserve mathematical layout.

Jump to a question

PDF page 1

Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 1; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
National

                   Qualifications
                   2024

                      2024   Chemistry

                     Higher    – Paper   2

  Question     Paper   Finalised   Marking    Instructions

 Scottish Qualifications Authority 2024

These marking instructions have been prepared by examination teams for use by SQA appointed
markers when marking external course assessments.

The information in this document may be reproduced in support of SQA qualifications only on a non-
commercial basis. If it is reproduced, SQA must be clearly acknowledged as the source. If it is to be
reproduced for any other purpose, written permission must be obtained from permissions@sqa.org.uk.

PDF page 2

Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 2; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
General marking principles for Higher Chemistry

Always apply these general principles. Use them in conjunction with the detailed marking
instructions, which identify the key features required in candidates’ responses.

(a) Always use positive marking. This means candidates accumulate marks for the
    demonstration of relevant skills, knowledge and understanding; marks are not deducted for
    errors or omissions.

(b) If a candidate response does not seem to be covered by either the principles or detailed
    marking instructions, and you are uncertain how to assess it, you must seek guidance from
    your team leader.

(c) Do not award half marks.

(d) Where a candidate makes an error at an early stage in a multi-stage calculation, award
    marks for correct follow-on working in subsequent stages, unless the error significantly
    reduces the complexity of the remaining stages. Apply the same principle for questions
    that require several stages of non-mathematical reasoning. The exception to this rule is
    where the marking instructions for a numerical question assign separate ‘concept marks’
    and an ‘arithmetic mark’. In such situations, the marking instructions will give clear
    guidance on the assignment or partial marks.

(e) Unless a numerical question specifically requires evidence of working to be shown, award
    full marks for a correct final response (including units) on its own.

(f) Candidates may fully access larger mark allocations whether their responses are in
    continuous prose, linked statements, or a series of developed bullet points.
(g) Do not deduct marks for inaccurate or unconventional spelling or vocabulary as long as the
    meaning of the word(s) is conveyed. For example, responses that include ‘distilling’ for
    ‘distillation’, or ‘it gets hotter’ for ‘the temperature rises’, are acceptable.

(h) In many questions, the unit in which the answer is to be expressed is given. In these
    questions, the candidate does not need to state a unit in their answer; but if they do, the
    unit must be correct. The full mark allocation cannot be awarded if an incorrect unit is
    shown. In these questions, incorrect units would only be penalised once in any paper.

(i) If a correct response is followed by a wrong response, award no marks. For example in
    response to the question, ‘State the colour seen when blue Fehling’s solution is warmed
    with an aldehyde’, do not award marks for the response ‘red green’. However, if a correct
    response is followed by additional information which does not conflict with that, ignore
    the additional information, whether correct or not. For example in response to a question
    concerned with melting point, ‘State why the tube should not be made of copper’, the
    response ‘Copper has a low melting point and is coloured grey’ would gain marks.

(j) Award full marks for the correct response to a calculation without working. Award partial
    marks, as shown in the detailed marking instructions, when working is given but the final
    response is incorrect. An exception is when candidates are asked to ‘Find, by calculation’ -
    do not award full marks for the correct response without working.

(k) Ignore the omission of one H atom from a full structural formula provided the bond is
    shown.

(l) Award marks for a symbol or correct formula in place of a name unless stated otherwise
    in the detailed marking instructions.

                                page 02

PDF page 3

Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 3; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(m) When formulae of ionic compounds are given as responses, candidates only need to show
    ion charges if these have been specifically asked for. However, if ion charges are shown,
    they must be correct. If incorrect charges are shown, do not award marks.

(n) If an answer comes directly from the text of the question, do not award marks. For
    example, in response to the question, ‘A student found that 0·05 mol of propane, C₃H₈
    burned to give 82·4 kJ of energy. C₃H₈(g) + 5O₂(g) → 3CO₂(g) + 4H₂O(ℓ). Name the kind of
    enthalpy change that the student measured’, do not award marks for ‘burning’ since the
    word ‘burned’ appears in the text.

(o) A guiding principle in marking is to give credit for correct elements of a response rather
    than to look for reasons not to give marks.

    Example 1: The structure of a hydrocarbon found in petrol is shown below.

    Name the hydrocarbon
    • Award the full mark for ‘3, methyl-hexane’, although the punctuation is not correct.

    Example 2: A student measured the pH of four carboxylic acids to find out how their
    strength is related to the number of chlorine atoms in the molecule. The results are
    shown.

      CH₃COOH        1.65

      CH₂ClCOOH      1.27

      CHCl₂COOH      0.90
      CCl₃COOH       0.51

    Describe the relationship between the number of chlorine atoms in the molecule and the
    strengths of the acids.
    • Award the full mark for a response such as ‘the more Cl₂, the stronger the acid’,
      although not completely correct.

(p) Unless the question is clearly about a non-chemistry issue, for example costs in an
    industrial chemical process, do not award marks for a non-chemical response.
    For example, in response to the question, ‘Why does the (catalytic) converter have a
    honeycomb structure?’, do not award a mark for ‘To make it work’. This response may be
    correct but it is not a chemical response.

                                page 03

PDF page 4

Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 4; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(q) Only award marks for a valid response to the question asked. Where candidates are asked
    to:
    • identify, name, give or state, they must only name or present in brief form.
    • describe, they must provide a statement or structure of characteristics and/or
      features.
    • explain, they must relate cause and effect and/or make relationships between things
      clear.
    • compare, they must demonstrate knowledge and understanding of the similarities
      and/or differences between things.
    • complete, they must finish a chemical equation or fill in a table with information.
    • determine or calculate, they must determine a number from given facts, figures or

      information.
    • draw, they must draw a diagram or structural formula, for example ‘Draw a diagram to
      show the part of a poly(propene) molecule formed from two propene molecules.’
    • estimate, they must determine an approximate value for something.
    • predict, they must suggest what may happen based on available information.
    • evaluate, they must make a judgement based on criteria.
    • suggest, they must apply their knowledge and understanding of chemistry to a new
      situation. A number of responses are acceptable: award marks for any suggestions that
      are supported by knowledge and understanding of chemistry.
    • use their knowledge of chemistry or aspect of chemistry to comment on, they must
      apply their skills, knowledge and understanding to respond appropriately to the
      problem/situation presented (for example by making a statement of principle(s)
      involved and/or a relationship or equation, and applying these to respond to the
      problem/situation). Candidates gain marks for the breadth and/or depth of their
      conceptual understanding.
    • write, they must complete a chemical or word equation, for example ‘Write the word
      equation for the complete combustion of ethanol.’

                                page 04

PDF page 5

Paper 2, Question 1
Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 5; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Marking instructions for each question

                                        Max
   Question       Expected response               Additional guidance
                                       mark
1.  (a) (i) (The first ionisation energy is) the 1
            energy required to remove one mole
            of electrons from one mole of
            gaseous atoms.
        (ii) P(g) → P⁺(g) + e⁻          1   State symbols must be shown.
                                            Negative sign on electron not
                                            required.

    (b)     Stronger intermolecular/Van der 3 Any mention of breaking
            Waals forces between phosphorus covalent/ionic/metallic bonds is
            compared with nitrogen. (1 mark) cancelling.
            London dispersion forces/LDFs are
            the intermolecular forces present.
                               (1 mark)

            There are more electrons in
            phosphorus/P₄ compared to
            nitrogen/N₂.       (1 mark)

    (c)     230 (kJ mol⁻¹)              2   -230 (kJ mol⁻¹) 1 mark

            Partial marks:
                                            No units required. (Wrong units
            (6 x 201) + (2 x (-)488) (1 mark) would only be penalised once in any
                                            paper).
            OR
            recognising that bond breaking is (KJ mol⁻¹ or Kj mol⁻¹ or KJ mol⁻¹
            endothermic and bond making is  accepted).
            exothermic.        (1 mark)
    (d) (i) 77/77.1(%)                  2
            Partial marks:

            Calculates theoretical mass = 149.85
            (g)                (1 mark)

            OR
            Correctly calculates the number of
            moles of reactant (2.42) and product
            (1.21).            (1 mark)

            OR
            Follow through from incorrectly
            calculated theoretical mass using
            relationship correctly. (1 mark)

        (ii) Reducing agent             1

                                page 05

PDF page 6

Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 6; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
1.  (d) (iii) 145 (litres)              2   No units required. (Wrong units
                                            would only be penalised once in any
            Partial marks:                  paper).
            280/28 = 10        (1 mark)

            OR
            1450 divided by incorrectly
            calculated ratio   (1 mark)

            OR
            1450/280 = 5.18    (1 mark)

            OR
            Incorrectly calculated ratio x 28
                               (1 mark)
            OR

            by proportion

            280 (g) = 1450 (l) (1 mark)

                                page 06

PDF page 7

Paper 2, Question 2
Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 7; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
2.  (a) (i) Activation energy           1
        (ii) (-)52.43, (-)52.4, (-)52 (kJ) 1 No units required. (Wrong units
                                            would only be penalised once in any
            Negative sign is not required   paper).

                                            (KJ or Kj or KJ accepted).

                                            kJ mol⁻¹ is not acceptable

        (iii) -/1-/-1                   1   The word negative is not accepted
                                            on its own.
    (b)     10Na + 2KNO₃ → K₂O + 5Na₂O + N₂ 1 Or correct multiples

    (c)     Silicon dioxide is a covalent network 2 ‘Covalent lattice’ is acceptable, but
                                (1 mark)    lattice on its own is not.

                                            Naming silicon as the covalent
                                            network is cancelling for first mark.

                                            Covalent network molecule is
                                            cancelling for first mark.

            (Strong) covalent bonds are broken A diagram of a molecule is
                                (1 mark)    cancelling for the first mark.

    (d)     47.26, 47.3, 47 (litres) OR 47260, 2 No units required. Only 1 mark can
            47300, 47000 (cm³⁾ ^{} (2 marks) be awarded for the correct answer if
                                            wrong unit is given.
            Partial marks:
                                            (wrong units would only be penalised
            Correctly calculated number of  once in any paper)
            moles of sodium azide multiplied by
            1.6 to give number of moles of
            nitrogen eg moles of nitrogen =
            1.969               (1 mark)
            OR
            An incorrectly calculated number of
            moles nitrogen x 24 (1 mark)

            OR
            by proportion
            65 g → 38.4 l       (1 mark)

            Allow follow through from incorrect
            multiple of 24 l    (1 mark)

    (e)     (Powders) have larger/higher surface 2
            area                (1 mark)

            More successful collisions (1 mark)

                                page 07

PDF page 8

Paper 2, Question 3
Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 8; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
3.          Award 1 mark where the candidate 3
            has demonstrated, at an appropriate
            level, a limited understanding of the
            chemistry involved. They have made
            some statement(s) which are
            relevant to the situation, showing
            that they have understood at least a
            little of the chemistry within the
            problem.
            Award 2 marks where the candidate
            has demonstrated, at an appropriate
            level, a reasonable understanding of
            the chemistry involved. They make
            some statement(s) which are
            relevant to the situation, showing
            that they have understood the
            problem.

            Award 3 marks where the candidate
            has demonstrated, at an appropriate
            level, a good understanding of the
            chemistry involved. They show a
            good comprehension of the
            chemistry of the situation and
            provide a logically correct answer to
            the question posed. This type of
            response might include a statement
            of the principles involved, a
            relationship or an equation, and the
            application of these to respond to
            the problem. The answer does not
            need to be ‘excellent’ or ‘complete’
            for the candidate to gain full marks.

            Award 0 marks where the candidate
            has not demonstrated, at an
            appropriate level, an understanding
            of the chemistry involved. There is
            no evidence that they have
            recognised the area of chemistry
            involved, or they have not given any
            statement of a relevant chemistry
            principle. Award this mark also if the
            candidate merely restates the
            chemistry given in the question.

                                page 08

PDF page 9

Paper 2, Question 4
Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 9; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
4.  (a) (i) Water                       1
        (ii) Oxidation/condensation     1   Accept dehydrogenation

        (iii) An amino acid that must be/is 1
            obtained from the diet/cannot be
            made in the body

        (iv) Denaturing                 1   Accept denature(s)/denatured.
        (A)
        (iv) Any of the three correct amino acid 1 All bonds and atoms must be correct
        (B) structures                      to award this mark.

                                page 09

PDF page 10

Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 10; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
4.  (a) (iv)                            1   If more than one hydrogen bond
        (C)                                 indicated, all must be correct.
                                            If partial charges are shown they
                                            must be correct.

    (b) (i) 0.467/0.47                  1   Ignore any units.
        (ii) The spots for glycine and lysine 1
            overlap/are close together.

            OR
            The R values are similar/close
            togeth^{f}er for glycine and lysine.

        (iii) Threonine                 1

                                page 10

PDF page 11

Paper 2, Question 5
Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 11; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
5.  (a)     Fats are a concentrated source of 1
            energy
            OR
            Fats are essential for the
            transport/storage of fat-soluble
            vitamins in the body

    (b) (i)                             1   Accept correct shortened structural
                                            formula.

        (ii) Ester (link)               1

    (c)     Fats are more saturated (with more 3 Accept correct answer in terms of
            regular shape).     (1 mark)    oils.

            This means they can pack together
            more closely/more compact
            structure.          (1 mark)

            Stronger LDF/forces of attraction
            between the molecules. (1 mark)
    (d) (i) Rancid                      1

        (ii) Bromine solution will quickly/rapidly 1
            decolourise with molecule B.
            OR

            Bromine solution will decolourise
            with molecule B but not molecule A
            OR

            Bromine solution will not decolourise
            with molecule A but will with
            molecule B.
        (iii) Atoms or molecules with unpaired 1 Accept species in place of atoms or
        (A) electron(s).                    molecules.
                                            If reference is made to a singular
                                            atom, electron must also be
                                            singular.

        (iii) Initiation                1
        (B)

                                page 11

PDF page 12

Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 12; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
5.  (d) (iv) Can react with free radicals forming 1 Accept:
        (A) stable molecules.
                                            Donates/provides electron(s) (to pair
                                            with an unpaired electron)
                                            OR
                                            Acts as a reducing agent

        (iv) Vitamin E is less polar (than vitamin 2 Accept response in terms of vitamin
        (B) C)                              C.
                                (1 mark)

            An explanation that links solubility
            of vitamin E to the polarity of fats
            and oils
                                (1 mark)

    (e) (i) C₁ H₂ COONa                 1   Accept structural formula.
              3 7
            OR
                                            Bond between O and Na is
            C₁ H₂ COO⁻Na⁺                   cancelling.
              3 7
            OR
            (C₁ H₂ COO⁻)(Na⁺)
              3 7
        (ii) To prevent scum forming    1   Accept an answer in terms of soap
        (iii) 2-methylbuta-1,3-diene    1   Apply GMP (o).
        (A)
        (iii) 3                         1
        (B)

                                page 12

PDF page 13

Paper 2, Question 6
Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 13; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
6.  (a) (i) Methyl octanoate            1
        (ii) Diagram shows a labelled safe 2
        (A) method of heating (eg water/sand
            bath or heating mantle) and labelled
            reaction mixture.   (1 mark)

            Diagram shows a labelled method of A closed system/stoppered test tube
            preventing the vapours escaping e.g. is not acceptable for the second
            wet paper towel/small test tube of mark.
            cold water/condenser at neck of test
            tube.               (1 mark)

        (ii)                            1   The peak drawn shows a higher
        (B)                                 activation energy.

                                            The line drawn by the candidate
                                            must start and finish at the same
                                            potential energies and positions on
                                            the reaction pathway.

    (b) (i) Correctly identifies that the 2
            molecule has two parts with
            different polarities. (1 mark)

            Correctly identifies that the polar
            part/hydroxyl groups dissolve in
            water/polar liquids/are hydrophillic
            whilst the non-polar
            part/hydrocarbon chain dissolve in
            biodiesel/non-polar liquids/are
            hydrophobic         (1 mark)
            OR

            Correctly identifies that the
            molecule has two parts that are
            hydrophillic and hydrophobic.
                                (1 mark)
            Correctly identifies that the
            hydrophillic part dissolves in
            water/polar liquids and the
            hydrophobic part dissolves in
            biodiesel/non-polar liquids
                                (1 mark)

        (ii) Reacting (edible oils) with glycerol 1

                                page 13

PDF page 14

Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 14; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
6.  (c) (i) 1 from:                     1
            Distance between                Distance from fuel to container is
            burner/wick/flame and container not accepted.
            Material/type of container
            Stirring water in both          Same mass of fuel is not accepted
            Size of wick                    Same mass/volume of water is not
            Use same draught shield         accepted.
            Indication of same insulation in both
            experiments
        (ii) 1 from:                    1
            Use a draught shield
            Move flame closer to container
            Fit a lid on the container
            Insulate container

        (iii) (-)41.8 (kJ g⁻¹) (3 marks) 3  No units required. A maximum of 2
                                            marks can be awarded for correct
            If final answer is wrong a maximum answer if wrong unit is given (where
            of 2 marks for the following may be no unit required, wrong units would
            awarded:                        only be penalised once in any
                                            paper).
            1 mark for a demonstration of the
            correct use of the relationship kJ is acceptable in place of kJ g⁻¹ (KJ
            Eh = cmΔT as shown by           or Kj or KJ g⁻¹ or Kj g⁻¹ accepted).
            (4∙18 x (an order of magnitude of 2)
            x 21)
            (ignore units for this mark).
            1 mark for evidence of scaling up of
            a calculated value of energy
            released to 1 gram.

    (d)     £12.75                      1

                                page 14

PDF page 15

Paper 2, Question 7
Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 15; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
7.  (a)     19/19.4/19.37 (g l⁻¹)        2  Answer must be given in g l⁻¹^{.}
            Partial marks:

            19373.4             (1 mark)

            OR
            Correct conversion of incorrectly
            calculated value to g l⁻¹ (1 mark)

    (b) (i) Solution of accurately/precisely/ 1
        (A) exactly known concentration

        (i) Rinse with                   2  Rinse with water is not accepted.
        (B) seawater/sample/solution
                                (1 mark)

            Fill above the mark and allow liquid
            to drop down to the mark (and read
            from the bottom of the meniscus)
                                (1 mark)
            OR
            Fill to mark, read from the bottom
            of the meniscus     (1 mark)

        (ii) To identify the end point.  1

        (iii) Only concordant values are 1
        (A) used/(the titre for) sample 1 is not
            concordant.
        (iii) 0.5775 (mol l⁻¹)           3  No units required. Only two marks
        (B)                                 can be awarded if wrong unit is
            If incorrect answer given, a    given.
            maximum of two marks can be     (wrong units would only be penalised
            awarded for demonstration of    once in any paper).
            knowledge of the two concepts:

            1 mark for knowledge of the
            relationship between moles,
            concentration and volume.

            1 mark for application of mole ratio.

                                page 15

PDF page 16

Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 16; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
7.  (b) (iii) 17.47 g                    2  No units required. Only one mark
        (C)                                 can be awarded if wrong unit is
            Partial marking:                given.
                                            (wrong units would only be penalised
            Calculation of mass of chloride in 10 once in any paper).
            cm³ sample = 0.1747 (g) (1 mark)
            OR
            multiplying calculated mass of
            chloride ions by 100 (1 mark)

            OR
            Calculation of total number of moles
            in 1 litre = 0.492  (1 mark)

            OR
            For multiplying calculated number of
            moles by 35.5       (1 mark)

    (c)     Chloromethane has permanent  2
            dipole to permanent dipole
            interactions whereas water has
            hydrogen bonding.   (1 mark)

            Hydrogen bonding is stronger than
            permanent dipole to permanent
            dipole interactions. (1 mark)

                                page 16

PDF page 17

Paper 2, Question 8
Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 17; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
8.          Award 1 mark where the candidate 3
            has demonstrated, at an appropriate
            level, a limited understanding of the
            chemistry involved. They have made
            some statement(s) which are
            relevant to the situation, showing
            that they have understood at least a
            little of the chemistry within the
            problem.
            Award 2 marks where the candidate
            has demonstrated, at an appropriate
            level, a reasonable understanding of
            the chemistry involved. They make
            some statement(s) which are
            relevant to the situation, showing
            that they have understood the
            problem.

            Award 3 marks where the candidate
            has demonstrated, at an appropriate
            level, a good understanding of the
            chemistry involved. They show a
            good comprehension of the
            chemistry of the situation and
            provide a logically correct answer to
            the question posed. This type of
            response might include a statement
            of the principles involved, a
            relationship or an equation, and the
            application of these to respond to
            the problem. The answer does not
            need to be ‘excellent’ or ‘complete’
            for the candidate to gain full marks.

            Award 0 marks where the candidate
            has not demonstrated, at an
            appropriate level, an understanding
            of the chemistry involved. There is
            no evidence that they have
            recognised the area of chemistry
            involved, or they have not given any
            statement of a relevant chemistry
            principle. Award this mark also if the
            candidate merely restates the
            chemistry given in the question.

                                page 17

PDF page 18

Paper 2, Question 9
Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 18; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
9.  (a) (i) 2843.55 (kg)                 2  No units required. Only one mark
                                            can be awarded if wrong unit is
            Partial marking:                given.
                                            (wrong units would only be penalised
            1 mark for moles Cl₂required =  once in any paper).
            40050 moles         (1 mark)
            OR
            Follow through for an arithmetically
            correct answer derived by
            multiplying a wrongly calculated
            number of moles     (1 mark)

            OR
            By proportion

            79.9(g) = (71 x 2) 142 (g) (1 mark)

            OR
            A correctly calculated mass of
            chlorine from an incorrect mole
            ratio
            OR

            Correct application of the mole ratio
            to an incorrectly calculated number
            of moles of TiO₂.
        (ii) Covalent molecular.         1  Accept discrete covalent molecular.

    (b) (i) 20%/20.1%/20.08 %            2

            Partial marking:
            Correct use of atom economy
            relationship without correct use of
            stoichiometry (ie using 1 mole of Mg)
            (working must be shown)
                                (1 mark)
            OR

            Correct use of atom economy
            relationship with correct use of
            stoichiometry (working must be
            shown) for magnesium chloride
                                (1 mark)
            OR
            Correct retrieval of GFMs and use of
            stoichiometry.      (1 mark)
            OR

            Correct working with no correct
            answer given.       (1 mark)

                                page 18

PDF page 19

Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 19; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
9.  (b) (ii) Mg(s) → Mg²⁺(aq) + 2e⁻      1  Ignore state symbols. Negative sign
                                            on e not required.
                                            Accept double headed arrow.
                                            Accept correct multiples.
        (iii) 10854 (moles of magnesium) 3

            Partial marking:

            Using moles:
            Correct calculation of moles of
            titanium chloride = 10005 and moles
            magnesium = 30864   (1 mark)
            OR

            Correct application of mole ratio.
            eg 20010 moles magnesium requires
            10005 moles titanium chloride (or
            any order of magnitude eg 20 or 10).
                                (1 mark)

            Allow for follow through from
            calculated number of moles of
            magnesium minus a calculated
            number of moles derived from
            titanium chloride   (1 mark)

        (iv) Argon is inert/unreactive   1

    (c)     Can be carried out at lower  1
            temperature/requires less energy/
            has a higher atom economy

                                page 19

PDF page 20

Paper 2, Question 10
Original 2024 Higher Chemistry - Paper 2 marking instructions, PDF page 20; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
10. (a)     6.0 - 4.5                    1
    (b)     Propanone/acetone            1

    (c)                                  1

                       [END OF MARKING INSTRUCTIONS]

                                page 20