2022 Advanced Higher Physics marking instructions

Source: Scottish Qualifications Authority (SQA) / Qualifications Scotland. This is a StemInteract HTML companion, not an official HTML edition. Selectable text is supplied alongside original page images. Use the images or original PDF for equations, powers, fractions, vector notation, tables and diagrams; text extraction cannot fully preserve mathematical layout.

Jump to a question

PDF page 1

Original 2022 Advanced Higher Physics marking instructions, PDF page 1; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
National

                   Qualifications
                   2022

                       2022    Physics

                     Advanced     Higher

             Finalised   Marking    Instructions

© Scottish Qualifications Authority 2022

These marking instructions have been prepared by examination teams for use by SQA appointed
markers when marking external course assessments.

The information in this document may be reproduced in support of SQA qualifications only on a non-
commercial basis. If it is reproduced, SQA must be clearly acknowledged as the source. If it is to be
reproduced for any other purpose, written permission must be obtained from permissions@sqa.org.uk.

PDF page 2

Original 2022 Advanced Higher Physics marking instructions, PDF page 2; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
General marking principles for Physics Advanced Higher

Always assign marks for each candidate response in line with these marking principles, the Physics:
general marking principles (GMPs)
(http://www.sqa.org.uk/files_ccc/Physicsgeneralmarkingprinciples.pdf) and the detailed marking
instructions for this assessment.

(a) Always use positive marking. This means candidates accumulate marks for the demonstration of
    relevant skills, knowledge and understanding; marks are not deducted from a maximum on the
    basis of errors or omissions.

(b) If a specific candidate response does not seem to be covered by either the principles or detailed
    marking instructions, and you are uncertain how to assess it, you must seek guidance from your
    team leader.

(c) Where a candidate incorrectly answers part of a question and carries the incorrect answer
    forward in the following part, award marks if the incorrect answer has then been used correctly
    in the subsequent part or ‘follow-on’. (GMP 17)

(d) Award full marks for a correct final answer (including units if required) on its own, unless a
    numerical question specifically requires evidence of working to be shown, eg in a ‘show’
    question. (GMP 1)

(e) Award marks where a diagram or sketch correctly conveys the response required by the
    question. Clear and correct labels (or the use of standard symbols) are usually required for
    marks to be awarded. (GMP 19)

(f) Award marks for knowledge of relevant relationships alone. When a candidate writes down
    several relationships and does not select the correct one to continue with, for example by
    substituting values, do not award a mark. (GMP 3)

(g) Award marks for the use of non-standard symbols where the symbols are defined and the
    relationship is correct, or where the substitution shows that the relationship used is correct. This
    must be clear and unambiguous. (GMP 22)

(h) Do not award marks if a ‘magic triangle’ (eg) is the only statement in a candidate’s
    response. To gain the mark, the correct relationship must be stated, for example V = IR or
       V
    R=  . (GMP 6)
       I
(i) In rounding to an expected number of significant figures, award the mark for responses that have
    up to two figures more or one figure less than the number in the data with the fewest significant
    figures. (GMP 10)

    For example:
    Data in question is given to 3 significant figures.

    Correct final answer is 8.16 J.
    Final answer 8.2 J or 8.158 J or 8.1576 J – award the final mark.

    Final answer 8 J or 8.15761 J – do not award the final mark
    (Note: the use of a recurrence dot, eg 0.6 , would imply an infinite number of significant
    figures and would therefore not be acceptable).

                                page 02

PDF page 3

Original 2022 Advanced Higher Physics marking instructions, PDF page 3; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(j) Award marks where candidates have incorrectly spelled technical terms, provided that responses
    can be interpreted and understood without any doubt as to the meaning. Where there is
    ambiguity, do not award the mark. Two specific examples of this would be when the candidate
    uses a term that might be interpreted as ‘reflection’, ‘refraction’ or ‘diffraction’ (for example
    ‘defraction’), or one that might be interpreted as either ‘fission’ or ‘fusion’ (for example
    ‘fussion’). (GMP 25)

(k) Only award marks for a valid response to the question asked. Where candidates are asked to:

    • identify, name, give, or state, they need only name or present in brief form.
    • describe, they must provide a statement or structure of characteristics and/or features.

    • explain, they must relate cause and effect and/or make relationships between things clear.
    • determine or calculate, they must determine a number from given facts, figures or
      information.

    • estimate, they must determine an approximate value for something.
    • justify, they must give reasons to support their suggestions or conclusions. For example this
      might be by identifying an appropriate relationship and the effect of changing variables.

    • show that, they must use physics [and mathematics] to prove something, for example a given
      value – all steps, including the stated answer, must be shown.
    • predict, they must suggest what may happen based on available information.

    • suggest, they must apply their knowledge and understanding of physics to a new situation. A
      number of responses are acceptable: award marks for any suggestions that are supported by
      knowledge and understanding of physics.
    • use their knowledge of physics or aspect of physics to comment on, they must apply their
      skills, knowledge and understanding to respond appropriately to the problem/
      situation presented (for example by making a statement of principle(s) involved and/or a
      relationship or equation, and applying these to respond to the problem/situation). Candidates
      are given credit for the breadth and/or depth of their conceptual understanding.

                                page 03

PDF page 4

Original 2022 Advanced Higher Physics marking instructions, PDF page 4; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(l) Marking in calculations

    Example question
    The current in a resistor is 1·5 amperes when the potential difference across it is 7·5 volts.
    Calculate the resistance of the resistor. (3 marks)

        Example response Mark and comment

     1. V = IR          1 mark: relationship
        7.5 = 1.5R      1 mark: substitution

        R = 5.0 Ω       1 mark: correct answer

     2. 5.0 Ω           3 marks: correct answer
     3. 5.0             2 marks: unit missing

     4. 4.0 Ω           0 marks: no evidence, wrong answer

     5. __ Ω            0 marks: no working or final answer
     6.    V  7.5
        R=  =   =4.0 Ω  2 marks: arithmetic error
           I  1.5
     7.    V
        R=  =4.0 Ω      1 mark: relationship only
           I
     8.    V
        R=  = __Ω       1 mark: relationship only
           I
     9.    V  7.5
        R=  =   = __Ω   2 marks: relationship and substitution, no final answer
           I  1.5
    10.    V  7.5
        R=  =   =4.0    2 marks: relationship and substitution, wrong answer
           I  1.5
    11.    V  1.5
        R=  =   =5.0 Ω  1 mark: relationship but wrong substitution
           I  7.5
    12.    V  75
        R=  =   =5.0 Ω  1 mark: relationship but wrong substitution
           I  1.5
    13.    I  1.5
        R = =    =5.0 Ω 0 marks: wrong relationship
           V  7.5
    14. V = IR
        7.5 = 1.5 × R

        R = 0.2 Ω       2 marks: relationship and substitution, arithmetic error
    15. V = IR

           I  1.5
        R = =    =0.2 Ω 1 mark: relationship correct but wrong rearrangement of
           V  7.5              symbols

                                page 04

PDF page 5

Question 1
Original 2022 Advanced Higher Physics marking instructions, PDF page 5; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Marking Instructions for each question

                                       Max
   Question       Expected response               Additional guidance
                                       mark
1.  (a) (i)  (         )                3   Accept: 60, 56.3, 56.32
             v =6.6t² +2.2t
               dv
             a  =  =13.2t+2.2    (1)
               dt 
             a=(13.2×4.1)+2.2      (1)

             a =56 ms⁻²            (1)

        (ii) (             )            3   Accept: 200, 170.1
             s=∫(6.6t² +2.2t).dt
                                            Solution with limits also acceptable
               6.6  2.2
             s=  t³+  t²(+c)       (1)
                                                          
                3    2
                                            s=⁴∫^{.}¹(6.6t²+2.2t).dt
                                                          
             (s=0 when t=0, so c=0)            0          
               6.6     2.2                     6.6 2.2 ⁴
             s=  ×4.1³+  ×4.1²     (1)      s=   t³+  t² ^{.}¹     (1)
                3      2                        3  2  
                                                        0
             s=170 m               (1)        6.6     2.2   
                                            s=   ×4.1³+ ×4.1² (−0) (1)
                                               3      2     
                                            s=170 m                (1)
    (b)                                 1   Single smooth curve with increasing
                                            gradient.
                                            Must start at the origin and extend
                                            to 4.1 s.
                                            Ignore any lines beyond t = 4.1 s

                                page 05

PDF page 6

Question 2
Original 2022 Advanced Higher Physics marking instructions, PDF page 6; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
2.  (a) (i) ω=ω₀  +αt               (1)  3  Accept 0.03, 0.0289, 0.02889
            0.52=0+α×18             (1)
            α =0.029 rads⁻²         (1)

        (ii)        1                    3  Or consistent with (a)(i)
             θ =ω₀t+ αt²            (1)
                                            Accept: 5, 4.70, 4.698
                    2
             θ =0×18+0.5×0.029×18²  (1)
                                             ω² =ω₀² +2αθ         (1)
             θ = 4.7 rad            (1)
                                             0.52² =0² +2×0.029×θ (1)
                                             θ = 4.7 rad          (1)
                                            Accept: 5, 4.66, 4.662
                                               ω₀ +ω
                                             θ =      t           (1)
                                                    
                                                 2  
                                               0+0.52
                                             θ =      ×18       (1)
                                                 2   
                                             θ =4.7 rad           (1)
                                            Accept: 5, 4.68, 4.680
    (b) (i) v = rω                 (1)   2     d
                                             v = (1)
                                                t
            greater r same ω       (1)
                                            greater d same t (1)
        (ii) (Centripetal acceleration of Y is) 2 MUST JUSTIFY
            greater                (1)
                                            Accept as justification:
            Student Y is a greater distance from
            the axis of rotation aᵣ =rω², ω is  v²
                                             aᵣ = both v and r increase but v is
            the same for X and Y.  (1)          r
                                            squared (so more significant) (1)
                                            Could be answered by calculation

                                             aₜ =rα or a =rα

                                            is incorrect justification (0)

                                page 06

PDF page 7

Question 3
Original 2022 Advanced Higher Physics marking instructions, PDF page 7; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
3.  (a)      I ᵣₒ_{d} = 1 ml² and Iₕₒₒₚ =mr² (1), (1) 3 NON-STANDARD SHOW
             ( ) 3      ( )                  1 for rod relationship
                                             1 for hoop relationship

             I =  5× 1 ×0.07×0.14²  + ( 0.38×0.14² )
                                             I _{w}ₕₑₑ =
                                                   
                                                   5×
                                                      1
                                                       ml²
                                                          
                                                          +mr²  (1), (1)
                 3                          ( l)
                                                     3   
                                   (1)
                                             Final answer must be shown,
             I =9.7×10⁻³ kgm²
                                             otherwise max 2.
                                             May also be calculated separately
                                             but addition must be shown before
                                             the final answer.
    (b) (i)  τ =Fr                 (1)   3   Accept: 0.2, 0.168, 0.1680
             τ =1.2×0.14           (1)
             τ =0.17 Nm            (1)
        (ii) τ =Iα                 (1)   4   Or consistent with (b)(i)
             τ =9.7×10⁻³×16        (1)       Accept: 0.01, 0.0148, 0.01480
             (τ_{F} =τ_{A}−τ_{U})
                    (         )
             τ_{F} =0.17− 9.7×10⁻³×16 (1)
             τ_{F} =0.015 Nm       (1)
    (c)     (The angular velocity increases so 2 Accept: central force
            the required) centripetal force
            increases              (1)
            until the friction is insufficient (to
            hold the stone in place) (1)

                                page 07

PDF page 8

Question 4
Original 2022 Advanced Higher Physics marking instructions, PDF page 8; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
4.  (a)           GMm                   2   SHOW
             E_{P} =−              (1)
                   r
                                            Final answer must be shown
                 6.67×10⁻¹¹×6.0×10²⁴×2.30×10³ otherwise MAX 1
             E_{P} =−
                    (            )
                     6.4×10⁶+3.12×10⁵
                                                 GM
                                   (1)      V =−    and  Eₚ =Vm
                                                  r
             E_{P} =−1.4×10¹¹ J             both relationships required for 1^{s}^{t}
                                            mark
                                            all substitutions required for 2ⁿ^{d}
                                            mark.
    (b)      d =vt                 (1)  3   Accept: 7700, 7749, 7749.5
               (            )
             2π× 6.4×10⁶+3.12×10⁵ =v×90.7×60   2π
                                             ω=   and v=rω          (1)
                                   (1)         T
                                                               2π
             v =7750 ms⁻¹          (1)       v=
                                               (
                                               6.4×10⁶+3.12×10⁵
                                                           )
                                                           ×        (1)
                                                            (90.7×60)
                                             v=7750 ms⁻¹            (1)
                                            OR
                                             mv² GMm
                                               =                    (1)
                                             r  r²
                                              2.30×10³×v² 6.67×10⁻¹¹×6.0×10²⁴×2.3×10³
                                                      =
                                             3.12×10⁵+6.4×10⁶ ( 3.12×10⁵+6.4×10⁶ ) ²
                                                                    (1)
                                             v=7720 ms⁻¹            (1)
                                            Accept: 7700, 7722, 7721.7
    (c)     (Eₜₒₜₐₗ = E_{P} +E_{K})     3   Or consistent with (b)
                                            Accept: 7, 7.09, 7.093
                     1
            Eₜₒₜₐₗ = E_{P} + mv²   (1)
                                                   GMm
                    2
                                             Eₜₒₜₐₗ =−             (1)
                                                    2r
                       (             )
            Eₜₒₜₐₗ =−1.4×10¹¹+ 0.5×2.30×10³×7750²
                                                  6.67×10⁻¹¹×6.0×10²⁴×2.30×10³
                                   (1)       Eₜₒₜₐₗ =−
                                                      (           )
                                                    2× 6.4×10⁶+3.12×10⁵
            Eₜₒₜₐₗ =−7.1×10¹⁰J     (1)
                                                                   (1)
                                             Eₜₒₜₐₗ =−6.9×10¹⁰ J   (1)
                                            Accept: 7, 6.86, 6.857
    (d)     (low-altitude orbit satellites 1 Do not accept: drag or friction alone
            experience) greater drag/friction or arguments about gravitational
            from the atmosphere (than high- field strength alone.
            altitude orbit satellites).
            or similar
                                page 08

PDF page 9

Original 2022 Advanced Higher Physics marking instructions, PDF page 9; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
4.  (e)                                 2   Accept 6, 6.12, 6.124
                  M₂  
             r³ = R³   
                   3M₁
                      
                           7.3×10²² 
                (      )
             r³ = 3.84×10⁸ ³×
                                  
                         3×6.0×10²⁴ 
                                   (1)
             r =6.1×10⁷ m          (1)

                                page 09

PDF page 10

Question 5
Original 2022 Advanced Higher Physics marking instructions, PDF page 10; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
  Question          Expected response              Additional guidance
                                          mark
5.  (a)              2GM                   3   Accept: 3.2, 3.246, 3.2461
            rₛ_{c}ₕ_{w}ₐᵣ =           (1)
                zschild
                      c²
                    2×6.67×10⁻¹¹×2.19×10³¹
            rₛ_{c}ₕ_{w}ₐᵣ =           (1)
               zschild   (      )
                         3.00×10⁸ ²
            rₛ_{c}ₕ_{w}ₐᵣ =3.25×10⁴ m (1)
                zschild
    (b)     Hydrogen fusion stops/ceases.  1
    (c)         L                          5   Accept 2, 2.36, 2.357
            b=                        (1)
               4πd²
                                               If 365 used
                                               Accept: 2, 2.36, 2.356
            L=4πr²σT⁴                 (1)
                   (                   )       250 ly conversion mark
            5.0×10⁻⁸×4π 250×365.25×24×60×60×3.00×10⁸ ²
                                               i ndependent
               (      )
            =4π 4.0×10⁹ ²×5.67×10⁻⁸×T⁴ (1),(1)
            T =2.4×10⁴ K              (1)

                                page 10

PDF page 11

Original 2022 Advanced Higher Physics marking instructions, PDF page 11; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
5.  (d)     Award 3 marks where the candidate 3 Candidates may use a variety of
            has demonstrated a good         physics arguments to answer this
            understanding of the physics    question.
            involved. They show a good
            comprehension of the physics of the Award marks based on candidates
            situation and provide a logically demonstrating overall good,
            correct answer to the question  reasonable, limited, or no
            posed. This type of response might understanding.
            include a statement of the
            principles involved, a relationship or
            an equation, and the application of
            these to respond to the problem.
            The answer does not need to be
            ‘excellent’ or ‘complete’ for the
            candidate to gain full marks.
            Award 2 marks where the candidate
            has demonstrated a reasonable
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to
            the situation, showing that they
            have understood the problem.

            Award 1 mark where the candidate
            has demonstrated a limited
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to
            the situation, showing that they
            have understood at least a little of
            the physics within the problem.

            Award 0 marks where the candidate
            has not demonstrated an
            understanding of the physics
            involved. There is no evidence that
            they have recognised the area of
            physics involved, or they have not
            given any statement of a relevant
            physics principle.
            Award this mark also if the
            candidate merely restates the
            physics given in the question.

                                page 11

PDF page 12

Question 6
Original 2022 Advanced Higher Physics marking instructions, PDF page 12; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
6.  (a)     It is not possible to know the 1 It is not possible to know the
            (precise) momentum and position of (precise) lifetime and associated
            a quantum particle simultaneously. energy change of a quantum particle
                                            simultaneously.
    (b)     The momentum of the alpha    2  Second mark is dependent on the
            particle is known precisely therefore first mark being awarded.
            its position is not known precisely
                                   (1)      The lifetime of the alpha particle is
            there is a (small) probability that known precisely therefore its energy
            the particle could exist outside the is not known precisely (1)
            nucleus (even although classically it
            does not have sufficient energy to there is a (small) probability that
            escape).               (1)      the particle could escape from the
                                            nucleus (even although classically it
                                            does not have sufficient energy to
                                            escape).               (1)

    (c)           h                      3  Accept: 8, 7.54, 7.537
             ΔEΔt ≥                (1)
                  4π
                            6.63×10⁻³⁴      Accept:
             ΔEₘᵢₙ ×0.70×10⁻⁶ =
               ( )                                   h
                               4π
                                             ΔEₘᵢₙΔt =
                                   (1)              4π
             ΔE ₘᵢₙ =7.5×10⁻²⁹ J   (1)
               ( )                          Do not accept as starting point:
                                                     h
                                             ΔEₘᵢₙΔt ≥
                                                    4π
                                                   h
                                             ΔEΔt =
                                                  4π
                                            Do not accept as final answer:
                                             ΔEₘᵢₙ ≥7.5×10⁻²⁹ J
                                             ΔE ≥7.5×10⁻²⁹ J

                                page 12

PDF page 13

Question 7
Original 2022 Advanced Higher Physics marking instructions, PDF page 13; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
7.          Award 3 marks where the candidate 3 Candidates may use a variety of
            has demonstrated a good          physics arguments to answer this
            understanding of the physics     question.
            involved. They show a good
            comprehension of the physics of the Award marks based on candidates
            situation and provide a logically demonstrating overall good,
            correct answer to the question   reasonable, limited, or no
            posed. This type of response might understanding.
            include a statement of the
            principles involved, a relationship or
            an equation, and the application of
            these to respond to the problem.
            The answer does not need to be
            ‘excellent’ or ‘complete’ for the
            candidate to gain full marks.
            Award 2 marks where the candidate
            has demonstrated a reasonable
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to
            the situation, showing that they
            have understood the problem.

            Award 1 mark where the candidate
            has demonstrated a limited
            understanding of the physics
            involved. They make some
            statement(s) that are relevant to
            the situation, showing that they
            have understood at least a little of
            the physics within the problem.

            Award 0 marks where the candidate
            has not demonstrated an
            understanding of the physics
            involved. There is no evidence that
            they have recognised the area of
            physics involved, or they have not
            given any statement of a relevant
            physics principle.
            Award this mark also if the
            candidate merely restates the
            physics given in the question.

                                page 13

PDF page 14

Question 8
Original 2022 Advanced Higher Physics marking instructions, PDF page 14; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
8.  (a) (i)    h                        3   Accept: 4.2, 4.159, 4.1587
             λ=                    (1)
               p
                                            Accept:
                   6.63×10⁻³⁴                   h
             λ=                    (1)       λ=    (1)
               9.11×10⁻³¹×1.75×10⁷             mv
             λ=4.16×10⁻¹¹ m        (1)
        (ii) Yes,                       1   Or consistent with (a)(i)
        (A) as 4.16 × 10⁻¹¹ (m) < 2.6 × 10⁻¹⁰ (m)
            OR                              Accept:
                                            Yes, as the de Broglie wavelength is
            Yes, as the de Broglie wavelength is smaller than the diameter of the
            of the same magnitude as the    atom
            diameter of the atom

        (B) mass three orders of magnitude 2 Can show by calculation.
            greater (and velocity three orders of
            magnitude less)        (1)

            de Broglie wavelength is similar to 2ⁿ^{d} mark is dependent on the 1^{s}^{t} mark
            diameter of gold atom. (1)      being awarded.
    (b)     A single value from 398 – 410 nm 1

                                page 14

PDF page 15

Question 9
Original 2022 Advanced Higher Physics marking instructions, PDF page 15; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response              Additional guidance
                                        mark
9.  (a) (i)  v ₚₐᵣₐ =1.38×10⁷ ms⁻¹       1   Accept: 1.4, 1.375, 1.3750
             (  llel)
        (ii) v ₚₑᵣₚ  =2.38×10⁷ ms⁻¹      1   Accept: 2.4, 2.382, 2.3816
             (  endicular)
    (b) (i)  F =qvB                 (1)  2   SHOW
                                             Accept:
             F =1.60×10⁻¹⁹×2.38×10⁷×23×10⁻⁶  F=qvBsinθ
                                    (1)      F=1.60×10⁻¹⁹×2.75×10⁷×23×10⁻⁶×sin60.0

             F =8.8×10⁻¹⁷N
                                             Must have final answer, otherwise
                                             max 1.
        (ii)    mv²                      3   Or consistent with (a)(ii)
        (A)
             F =                    (1)
                r
                                             Accept: 1, 1.08, 1.077
                    1.673×10⁻²⁷×(2.38×10⁷)²
             8.8×10⁻¹⁷ =
                                                mv
                            r                r =    ok as starting point
                                    (1)         qB
                                             Accept: 1, 1.08, 1.082
             r =1.1×10⁴ m           (1)
        (ii)            2π               3   Or consistent with (a)(ii) and
        (B)  v=rω and ω=            (1)      (b)(ii)(A)
                        T
                                             Accept:3, 2.90, 2.904
               2πr
             
             T =
                   
                v 
                                             Accept: d =vt and d =2πr
                                             as starting point
               2π×1.1×10⁴
            T =                     (1)
                2.38×10⁷
                                                       2π
                                             F=mrω² and ω=          (1)
            T =2.9×10⁻³ s           (1)                 T
                                                    1.673×10⁻²⁷×1.1×10⁴×4×π²
                                             8.8×10⁻¹⁷ =
                                                           T²
                                                                    (1)
                                             T =2.9×10⁻³ s          (1)
                                             Accept: 3, 2.87, 2.873
        (iii) d =vt                 (1)  3   Or consistent with (a)(i) and
                                             (b)(ii)(B)
             d =1.38×10⁷×2.9×10⁻³   (1)
                                             Accept: 4, 4.00, 4.002
             d =4.0×10⁴ m           (1)
    (c)     radius decreases        (1)  2
            pitch decreases         (1)

                                page 15

PDF page 16

Question 10
Original 2022 Advanced Higher Physics marking instructions, PDF page 16; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response               Additional guidance
                                         mark
10. (a)     Displacement is proportional to and in 1 F =−ky or equivalent.
            the opposite direction to the
            acceleration/unbalanced force.
    (b)             k                   2    NON-STANDARD SHOW
             y = Acos t
                      
                     m
                                             1 mark for both differentiations
             dy     k    k                   When first differentiation shown,
               =−A   sin  t
                                             it must be correct, otherwise 0
             dt     m     m
                           
                                               marks.
             d²y    k    k 
                                               Final relationship must be shown,
                =−A  cos  t        (1)
                           
             dt²    m     m                    otherwise max 1.
                           
              d²y        k 
             m   =−kAcos  t
                           
              dt²         m
                           
            OR                       (1)
              d²y
             m   =−ky
              dt²
              d²y
             m   +ky =0
              dt²
    (c) (i)                               2    NON-STANDARD SHOW
                 k
             ω=                      (1)
                 m
                                               Final answer must be shown,
                 24
             ω=                      (1)       otherwise max 1
                 0.75
             ω=5.7 rads⁻¹
        (ii) a=(-)ω²y
                                     (1)
                                          3    Accept:1, 1.23, 1.235
                                               Accept: a=(−)ω²A
             a ₘₐₓ =(-)5.7²×0.038    (1)
             (  )
             a ₘₐₓ =(-)1.2 ms⁻²      (1)
             (  )
        (iii)                             2    Or consistent with (c)(ii)
                                               If harmonic function shown:
                                               1 for values of a
                                               1 for shape (cos ^{m}o^{a}r^{x} -cos curve)
                                               Non-harmonic function (0)
                                               Can show damping if done
                                               correctly.
                                page 16

PDF page 17

Question 11
Original 2022 Advanced Higher Physics marking instructions, PDF page 17; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
11. (a) (i)  E =kA²                (1)  3   Accept: 2.0, 2.043, 2.0425
             (          )
             8.17 =k×12.6²                  Accept:
                                             E₁  E₂
                                               =       (1)
                 8.17                        A²  A₂²
             E₂ =     ×6.3²        (1)        1
                 12.6²                       8.17  E₂
                                                 =     (1)
                                             12.6² 6.3²
             E₂ =2.04 mJ           (1)
                                             E₂ =2.04 mJ (1)
    (a) (ii) y =6.3sin2π(1.32t+1.04x)   2   1 for all numerical values
                                            1 for change of sign
    (b)        2πx                      3   Accept: 3, 2.5, 2.51, 2.513
            φ=                     (1)
                λ
               2π×(3.6−2.0)
            φ=                     (1)
                   4.0
               4π
            φ=   rad               (1)
                5

                                page 17

PDF page 18

Question 12
Original 2022 Advanced Higher Physics marking instructions, PDF page 18; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
12. (a) (i)     λD                      3   Accept: 4, 4.03, 4.031
             Δx=                   (1)
                 d
                633×10⁻⁹×2.42
             Δx=                   (1)
                  0.38×10⁻³
             Δx=4.0×10⁻³m          (1)
        (ii)                            3   Or consistent with (a)(i)
             Δ(Δx)
                     ΔD²  Δd ²
                  =     +      (1)
              Δx     D    d             Suspend significant figures rule
              Δ(Δx)   0.02²  0.01²      Accept: rule of three applied
                    =     +    (1)
             4.0×10⁻³ 2.42 0.38
                                            Accept calculations using
             Δ(Δx)=1.1×10⁻⁴m       (1)      percentages.
    (b)      Δx =(3.90±0.03) mm         1   Suspend significant figures rule
                                            Accept uncertainty as a %

    (c)     (b) or 3.90 mm         (1)  2   MUST JUSTIFY
                                            Or consistent with (a) and/or (b)

            As it has a smaller             Accept:
            (absolute/fractional/percentage) It is more precise. (1)
            uncertainty            (1)
                                            Smaller random/systematic/scale
                                            reading uncertainty is incorrect.

    (d)     (The fringe separation) decreases (1) 2 MUST JUSTIFY

            λ decreases, d and D remain     Accept:
            constant               (1)       ∆x∝λ for second mark

                                page 18

PDF page 19

Question 13
Original 2022 Advanced Higher Physics marking instructions, PDF page 19; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question        Expected response               Additional guidance
                                         mark
13. (a)     (The electric field vector) oscillates (or 1 Do not accept:
            vibrates) in one plane only.       direction instead of plane
                                               or
                                               travels instead of oscillates
    (b) (i)                                1   Accept a range of 1 to 4
               I (W m⁻²)   cos²θ
                                               significant figures
                 4.0       0.75
                 3.2       0.59

                 2.8       0.50

                 1.6       0.25
                 0.5       0.03

        (ii)                               3   1 mark for labels including unit
                                               and suitable scales
                                               1 mark for accurate plotting
                                               (±½ box tolerance and consistent
                                               with (b)(i))
                                               1 mark for line of best fit

                                               Non-linear scale(s) across the
                                               range of the data
                                               – award 0 marks
                                               Do not penalise for swapping the
                                               axes

        (iii) (1) for substitution into gradient 2 Must be consistent with
            relationship (may be implied)      candidate’s line
            (1) for answer                     Determine gradient
                                               Must use two points on the line.

        (iv) (1) for value of cos²θ from graph 2 Must be consistent with
            (1) for θ                          candidate’s line

                                               If using the equation of a
                                               straight line, must include y-axis
                                               intercept, otherwise 0 marks.
        (v) intercept of candidate’s line with I axis 1 Must be consistent with
                                               c andidate’s line.

                                page 19

PDF page 20

Original 2022 Advanced Higher Physics marking instructions, PDF page 20; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
13. (c) (i) Reduce the background light level 1
            OR
            Place a black cloth on the bench

            OR
                                            Measurements of angle only not
            Repeat measurements (and take the
                                            acceptable. 0 marks
            mean)
        (ii) Repeat measurements (and take the 1 Measurements of angle only not
            mean)                           acceptable. 0 marks
            OR
            Use a (light) meter that measures to
            more decimal places/finer
            graduations on scale

                                page 20

PDF page 21

Question 14
Original 2022 Advanced Higher Physics marking instructions, PDF page 21; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response                 Additional guidance
                                        mark
14. (a)      1                            3    Accept:2, 2.39, 2.394
              mv² =QV              (1)
             2
                                               Accept negative value for Q.
             0.5×9.11×10⁻³¹×(2.9×10⁷)² =1.60×10⁻¹⁹×V
                                   (1)
            V =2.4×10³ V           (1)
    (b)                                   1    Ignore end effects.

                                               Field lines must be straight/spaced
                                               uniformly.

                                               Field lines must start and end on the
                                               plates.
    (c)     The electrons travel with (constant) 2 No force in the horizontal direction
            horizontal speed/velocity. (1)     (1)

                                               Unbalanced force in the vertical
            Electrons travel with (constant)
                                               direction (1)
            vertical acceleration. (1)
                                               Accept:
                                               Perpendicular to field in place of
                                               horizontal
                                               Parallel to field in place of vertical.
                                               Do not accept:
                                               Attracted to the top/positive plate
                                               without reference to unbalanced
                                               force for second mark
    (d) (i)  v² =u² +2as           (1)    2    SHOW
                                               Final answer must be shown,
             (1.2×10⁷)² =0² +2×a×4.0×10⁻³      otherwise MAX 1.
                                   (1)
             a=1.8×10¹⁶ ms⁻²

        (ii) (F =ma)                      4    Accept: 9, 8.78, 8.782

             F =9.11×10⁻³¹×1.8×10¹⁶ (1)
                         V
             F =QE and E =         (1)
                         d
               QV 
             F = 
                d 
                                 0.90×10³
             9.11×10⁻³¹×1.8×10¹⁶ =1.60×10⁻¹⁹×
                                   d
                                   (1)
             d =8.8×10⁻³ m         (1)

                                page 21

PDF page 22

Question 15
Original 2022 Advanced Higher Physics marking instructions, PDF page 22; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
15. (a) (i)     μ₀I                     3   Accept: 1, 1.20, 1.200
             B=                    (1)
                2πr
                4π×10⁻⁷×1.8×10³
             B=                    (1)
                   2π×30.0
             B=1.2×10⁻⁵ T          (1)
        (ii) F =IlB                (1)  3   or consistent with (a)(i)

             F
              =1.8×10³×1.2×10⁻⁵    (1)      Accept: 2, 2.16, 2.160
             l
                                            Where l is substituted as 1 accept
             F
               =2.2×10⁻² Nm⁻¹      (1)      final answer in N
             l
    (b)                               2   Accept:3.9, 3.892, 3.8919
                     1
             vₘ =       
                        
                 εᵣ ε₀ μᵣ μ₀              If unit given in final answer
                                            (1) max.
                            1
            1.52×10⁸ =
                    εᵣ×8.85×10⁻¹²×1.00×4π×10⁻⁷
            (1)
             εᵣ =3.89              (1)

                                page 22

PDF page 23

Question 16
Original 2022 Advanced Higher Physics marking instructions, PDF page 23; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
16. (a)     Inductive reactance is the  1
            opposition (of an inductor) to
            changing current       (1)
    (b) (i)               1           2   NON-STANDARD SHOW
              X_{L} =2πfL, X_{C} =        1 mark for both relationships
                        2πfC              1 mark for equating using f₀
                                            If equated using f then maximum 1
                    1
             2πf₀L=             (1), (1)    mark
                  2πf₀C
                                            Final relationship must be shown
                  1
             f₀ =                           otherwise maximum 1 mark
                2π LC
        (ii)      1                     3   Accept: 8, 8.25, 8.246
             f₀ =
                2π LC
                         1                  1 mark for f₀ =160×10³ (Hz)
            160×10³ =           (1), (1)
                    2π 120×10⁻⁶×C
             C =8.2×10⁻⁹ F         (1)
    (c) (i)  τ =RC                 (1)  3   Accept: 2, 2.00, 2.000
             250=125×10³×C         (1)

             C =2.0×10⁻³ F         (1)

        (ii) At 250 s, voltage=4.4 V (1) 2  NON-STANDARD SHOW

             4.4                             37%×12 = 4.4 (V)      (1)
                                   (1)
             12.0
                                             4.4 (V) gives a time of 250 s (1)
            (=0.37)=37%
                                            Accept 4.44 (V)
                                            Do not accept: 4 (V)

                       [END OF MARKING INSTRUCTIONS]

                                page 23