2026 Advanced Higher Chemistry marking instructions

Source: Scottish Qualifications Authority (SQA) / Qualifications Scotland. This is a StemInteract HTML companion, not an official HTML edition. Selectable text is supplied alongside original page images. Use the images or original PDF for equations, powers, fractions, vector notation, tables and diagrams; text extraction cannot fully preserve mathematical layout.

Jump to a question

PDF page 1

Original 2026 Advanced Higher Chemistry marking instructions, PDF page 1; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
National

                   Qualifications
                   2026

                      2026   Chemistry

                     Advanced     Higher

  Question     Paper   Finalised   Marking    Instructions

These marking instructions have been prepared by examination teams for use by Qualifications
Scotland appointed markers when marking external course assessments.

The information in this document may be reproduced in support of Qualifications Scotland
qualifications only on a non-commercial basis. If it is reproduced, Qualifications Scotland must
be clearly acknowledged as the source. If it is to be reproduced for any other purpose, written
permission must be obtained from Qualifications Scotland.

 © Qualifications Scotland 2026

PDF page 2

Original 2026 Advanced Higher Chemistry marking instructions, PDF page 2; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
General marking principles for Advanced Higher Chemistry

This information is provided to help you understand the general principles you must apply when
marking candidate responses to questions in this paper. These principles must be read in conjunction
with the detailed marking instructions, which identify the key features required in candidate
responses.

(a) Marks for each candidate response must always be assigned in line with these general marking
    principles and the detailed marking instructions for this assessment.

(b) Marking should always be positive. This means that, for each candidate response, marks are
    accumulated for the demonstration of relevant skills, knowledge and understanding: they are
    not deducted from a maximum on the basis of errors or omissions.

(c) If a specific candidate response does not seem to be covered by either the principles or detailed
    marking instructions, and you are uncertain how to assess it, you must seek guidance from your
    team leader.

(d) Where a candidate makes an error at an early stage in a multi stage calculation, credit should
    normally be given for correct follow on working in subsequent stages, unless the error
    significantly reduces the complexity of the remaining stages. The same principle should be
    applied in questions which require several stages of non-mathematical reasoning. The exception
    to this rule is where the marking instructions for a numerical question assign separate “concept
    marks” and an “arithmetic mark”. In such situations, the marking instructions will give clear
    guidance on the assignment of partial marks.

(e) In many cases, marks can still be awarded for inaccurate or unconventional spelling or
    vocabulary as long as the meaning of the word(s) is conveyed. For example, responses that
    include ‘distilling’ for ‘distillation’, or ‘it gets hotter’ for ‘the temperature rises’, should be
    accepted.

(f) If a correct answer and a wrong answer are present, it should be treated as a cancelling error
    and no marks should be given. For example, in response to the question, ‘State the colour seen
    when blue Fehling’s solution is warmed with an aldehyde’, the answer ‘red green’ gains no
    marks.
    However, if a correct answer and additional information, which does not conflict, are present,
    the additional information should be ignored, whether correct or not. For example, in response
    to a question concerned with melting point, ‘State why the tube should not be made of copper’,
    the response ‘Copper has a low melting point and is coloured grey’ would not be treated as
    having a cancelling error.

(g) Full marks are usually awarded for the correct answer to a calculation without working and the
    partial marks shown in the Detailed Marking Instructions are for use when working is given but
    the final answer is incorrect. An exception is when candidates are asked to ‘Clearly show your
    working for the calculation’, when full marks cannot be awarded for the correct answer without
    working.

                                page 02

PDF page 3

Original 2026 Advanced Higher Chemistry marking instructions, PDF page 3; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
(h) Significant figures.

    This marking instruction only applies to correct final answers. If the data in a question is
    given to three significant figures, the final answer should also have three significant
    figures. However one fewer significant figure and up to two more significant figures is
    acceptable.

    For example if a correct final answer is 8.16 J then 8.2 J, 8.158 J and 8.1576 J would also
    be acceptable. Answers out with this range would not be acceptable and one mark would
    not be awarded.
                            .
    The use of a recurrence dot, eg 0.6, would imply an infinite number of significant figures
    and would therefore not be acceptable.

    This marking instruction must only be applied a maximum of once per paper and cannot be
    applied if instruction (i) has already been applied in the paper.

 (i) Units

    This marking instruction only applies to correct final answers. In most questions units are
    not required. However, if the candidate writes units then they must be correct. The
    symbols L and l are both acceptable for litres.
    An incorrect unit would not be acceptable, and one mark would not be awarded.
    This marking instruction must only be applied a maximum of once per paper and cannot be
    applied if instruction (h) has already been applied in the paper.

(j) Intermediate rounding.

    Ideally, calculated intermediate values should not be rounded. However, if the candidate
    has correctly rounded, the calculated intermediate values can have one significant figure
    fewer than the data given in the question, but no fewer, otherwise full marks may not be
    awarded and partial marking would apply.
    For example, if the data in a question is given to three significant figures, the
    intermediate value should have no fewer than two significant figures.

(k) If a structural formula is asked for, CH₃ is acceptable as a methyl group, and CH₃CH₂ and
    C₂H₅ are acceptable as an ethyl group.

    If a name is asked for such as 3-methylhexane, then 3, methyl-hexane would be
    acceptable, ie ignore incorrect use of commas and dashes.

(l) When drawing structural formulae, a mark should only be awarded if the bonds point to
    the appropriate atoms.
    The example below would be incorrect.

                                page 03

PDF page 4

Paper 1, Question 1Paper 1, Question 2Paper 1, Question 3Paper 1, Question 4Paper 1, Question 5Paper 1, Question 6Paper 1, Question 7Paper 1, Question 8Paper 1, Question 9Paper 1, Question 10Paper 1, Question 11Paper 1, Question 12Paper 1, Question 13Paper 1, Question 14Paper 1, Question 15Paper 1, Question 16Paper 1, Question 17Paper 1, Question 18Paper 1, Question 19Paper 1, Question 20Paper 1, Question 21Paper 1, Question 22Paper 1, Question 23Paper 1, Question 24Paper 1, Question 25
Original 2026 Advanced Higher Chemistry marking instructions, PDF page 4; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Marking instructions for each question

Section 1

  Question  Answer     Mark

    1.        C         1
    2.        D         1

    3.        C         1

    4.        D         1

    5.        A         1
    6.        D         1

    7.        B         1

    8.        B         1

    9.        A         1

    10.       C         1
    11.       B         1

    12.       A         1

    13.       C         1

    14.       C         1

    15.       B         1
    16.       B         1

    17.       A         1

    18.       C         1

    19.       A         1
    20.       B         1

    21.       D         1

    22.       B         1

    23.       A         1

    24.       C         1
    25.       B         1

                                page 04

PDF page 5

Paper 2, Question 1
Original 2026 Advanced Higher Chemistry marking instructions, PDF page 5; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Section 2

                                        Max
   Question       Expected response               Additional guidance
                                       mark
1.  (a)                                  1  All of the orbital boxes must be
                                            shown and clearly labelled.
    (b)                                  1  l must be subscript in m
             Quantum                                         l
                     n    l   m   m
             number            l   s
             Value   4    0   0   + ½

    (c) (i) (Electrons) promoted/excited 1
            (to higher energy levels).

            OR

            (Electrons) move to higher energy
            levels.

        (ii) Different (electron)        1  An answer that implies only 2 levels
            transitions/energy gaps.        is not acceptable on its own.
            OR                              Direction of electron movement is
                                            not required but must be correct if
            A suggestion that there are more given.
            than 2 energy levels/subshells.
                                            An answer that suggests absorption
            OR                              only is not acceptable.

            A suitable diagram with explanation.

        (iii) 286(nm)                    2  290/285.8/285.77 are also
        (A)                                 acceptable answers.
            Partial marking
                                            Units not required but must be
            1 mark may be awarded for       correct if given.

            E = Lhc/λ.                      There may be other acceptable
                                            answers based on correct
            OR                              intermediate rounding.

            E = Lhf  and  c= fλ.

            OR

            Correct substitution into the above
            equation(s).
        (iii) Longer wavelength.         1
        (B)
            OR

            Shorter wavelength in potassium.

                                page 05

PDF page 6

Paper 2, Question 2
Original 2026 Advanced Higher Chemistry marking instructions, PDF page 6; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
2.  (a) (i) (+)108 (J K⁻¹ mol⁻¹)         1  110/107.8 are also acceptable
                                            answers.
                                            Units not required but must be
                                            correct if given.

        (ii) 840 (K).                    2  839.8/839.81 are also acceptable
                                            answers.
            Partial marking
                                            If the candidate uses ∆S = 107.8 then
            1 mark may be awarded for       the acceptable answers are
                                            841/841.4/841.37
            ΔG = 0.
                                            ΔH must be +90.7 if working given.
            OR
                                            Units not required but must be
            T = ΔH/ΔS.                      correct if given.

            OR                              Allow correct follow through from
                                            (a)(i).
            ΔH = (+)90.7.
    (b)     0.07 (mg)                    1  0.072/0.0720 are also acceptable.

                                            Units not required but must be
                                            correct if given.

    (c)     Absorbance/intensity measured (at a 2
            specific wavelength).

            OR

            The greater the concentration the
            greater the absorbance/intensity.
                                    (1)

            Compared to standard/reference of
            known concentration.

            OR

            Using a calibration graph. (1)

                                page 06

PDF page 7

Paper 2, Question 3
Original 2026 Advanced Higher Chemistry marking instructions, PDF page 7; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
3.  (a) (i) Reaction 2                  1
        (A)
            AND
            more negative/lower ∆G^{o}.

            OR

            Reaction 1 and less negative/higher
            ∆G^{o}.

        (B) (∆Gis) not standard conditions. 1

            OR

            ∆G^{o} is determined under standard
            conditions.

            OR

            A statement which recognises that It must be clear that the differences
            ∆G is at different              described are between ∆G and ∆G^{o}
            temperatures/pressures/         and not between Reaction 1 and
            concentrations to ∆G^{o}.       Reaction 2.
        (ii) Hexacyanidoferrate(II)     1   Answer must be correctly spelled as
        (A)                                 shown.

        (ii) Electrons move to higher energy 2 The first mark may not be awarded
        (B) d orbitals.             (1)     if the candidate refers to HOMO/
                                            LUMO.

            Blue absorbed/435 – 480 nm      The second mark may not be
            absorbed/complementary colour   awarded if there is any mention of
            (to yellow) absorbed.   (1)     emission.

    (b) (i) 3.45 x 10⁻³ (moles)         1   3.4 x 10⁻³/3.446 x 10⁻³/3.4456 x 10⁻³
                                            also acceptable answers.

                                            Unit is not required but if given must
                                            be correct.

                                            There may be other acceptable
                                            answers based on correct
                                            intermediate rounding.

                                page 07

PDF page 8

Original 2026 Advanced Higher Chemistry marking instructions, PDF page 8; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
3.  (b) (ii) 1.72 (%).                   2  1.7/1.721/1.7206 are also
                                            acceptable answers.
            Partial marking
                                            If the candidate uses 3.4 x 10⁻³ then
            1 mark may be awarded for:      the acceptable answers are
                                            1.8/1.78/1.776/1.7761
            1.55 x 10⁻³ moles of Ag⁺/AgNO₃
            reacted or Cl⁻/NaCl present in 5.27 g If the candidate uses 3.446 x 10⁻³
            cheese.                         then the acceptable answers are
                                            1.7/1.73/1.725/1.7250
            OR
                                            If the candidate uses 3.4456 x 10⁻³
            0.0907 g NaCl present in 5.27 g then the acceptable answers are
            cheese.                         1.7/1.73/1.726/1.7255
            OR                              Unit is not required but if given must
                                            be correct.
            Correct % by mass calculated from
            an incorrectly calculated mass of Allow follow through from (b)(i).
            sodium chloride in 5.27g.
                                            There may be other acceptable
                                            answers based on correct
                                            intermediate rounding.

                                page 08

PDF page 9

Paper 2, Question 4
Original 2026 Advanced Higher Chemistry marking instructions, PDF page 9; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
4.          This is an open-ended question. 3 Award 0 marks where the candidate
                                            has not demonstrated, at an
            1 mark: The candidate has       appropriate level, an understanding
            demonstrated, at an appropriate of the chemistry involved. There is
            level, a limited understanding of the no evidence that they have
            chemistry involved. They have made recognised the area of chemistry
            some statement(s) that are relevant involved, or they have not given any
            to the situation, showing that they statement of a relevant chemistry
            have understood at least a little of principle. Award zero marks also if
            the chemistry within the context. the candidate merely restates the
                                            chemistry given in the question.
            2 marks: The candidate has
            demonstrated, at an appropriate
            level, a reasonable understanding of
            the chemistry involved. They make
            some statement(s) that are relevant
            to the situation, showing that they
            understand the context.
            3 marks: The maximum available
            mark would be awarded to a
            candidate who has demonstrated, at
            an appropriate level, a good
            understanding, of the chemistry
            involved. The candidate shows a
            good comprehension of the
            chemistry of the situation and has
            provided a logically correct answer
            to the question posed. This type of
            response might include a statement
            of the principles involved, a
            relationship or an equation, and the
            application of these to respond to
            the context. The answer does not
            need to be ‘excellent’ or ‘complete’
            for the candidate to gain full marks.

                                page 09

PDF page 10

Paper 2, Question 5
Original 2026 Advanced Higher Chemistry marking instructions, PDF page 10; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
5.  (a) (i) Complexometric               1
        (A)
        (i) Hexadentate                  1
        (B)

        (i) Non-bonding pairs/lone pairs of 1 0 marks if there is mention of
        (C) electrons donated (to the central calcium atom.
            ion).

            OR

            Dative (covalent) bonds.
        (ii) Any one from:               1  Does not absorb moisture from the air
        (A) • be available in a high state of is not an acceptable response on its
              purity                        own.
            • be stable (when solid and in
              solution)
            • be soluble
            • have a reasonably high GFM

        (ii) To determine the accurate/exact 1 To determine the known
        (B) concentration.                  concentration on its own is not
                                            acceptable.

        (iii) 0.00269 (mol l⁻¹)          1  0.0027, 0.002691, 0.0026913 are also
                                            acceptable answers.

                                            Units not required but if given must
                                            be correct.

                                            There may be other acceptable
                                            answers based on correct
                                            intermediate rounding.
    (b)     247 (mg l⁻¹).                1  250/247.2/247.25 are also
                                            acceptable answers.
            AND
                                            Units not required but if given must
            Hard.                           be correct.

                                page 10

PDF page 11

Paper 2, Question 6
Original 2026 Advanced Higher Chemistry marking instructions, PDF page 11; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
6.  (a) (i) H₂                           1  The word hydrogen on its own is not
                                            acceptable.
        (ii) Ethoxide (ion)              1

        (iii) Correct curly arrows  (1)  2  Wedged bonds are not necessary.

                                            The structure of the nucleophile
                                            must be correct for the first mark.

            Correct transition state (1)

                                            Transition state must have dashed
                                            bonds and square brackets with
                                            negative charge on outside as
                                            shown.

        (iv) methoxyethane               1  Accept: 1-methoxyethane.

                                            Must be the systematic name.
    (b) (i) 1.05 x 10⁻⁶ (mol l⁻¹ s⁻¹)    1  General marking principle (h) is
                                            suspended for this question.

                                            Units not required but if given must
                                            be correct.

        (ii) 7 x 10⁻⁴               (1)  2  6.6/6.56 x 10⁻⁴ are also acceptable
                                            answers.
            l mol⁻¹ s⁻¹             (1)
                                            Allow units in any order.

        (iii) 58.2 (kJ mol⁻¹)            1  60/58/58.16/58.160 are also
                                            acceptable answers.

                                            Units not required but if given must
                                            be correct.
                                            There may be other acceptable
                                            answers based on correct
                                            intermediate rounding.

                                page 11

PDF page 12

Paper 2, Question 7
Original 2026 Advanced Higher Chemistry marking instructions, PDF page 12; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
7.  (a) (i) Reduction                    1
        (ii) (Carbon atom) has a partial positive 1
        (A) (δ+) charge/is electron
        (I) deficient/less electronegative than
            the O.

        (ii) (Pi bond) requires less energy to 1 The opposite statements referring to
        (A) break (than a sigma bond).      sigma bonds are also acceptable
        (II)                                answers as long as sigma bond is
            OR                              stated.

            (Pi bond) is higher in energy/less
            stable (than a sigma bond).

            OR

            (Pi bond) is weaker/easier to break
            (than a sigma bond).
         (ii) Donates a proton/hydrogen ion/H⁺ 1 Donates hydrogen is not an
         (B)                                acceptable answer.

    (b)                                  1

            OR

            Any other correct structural formula.

                                page 12

PDF page 13

Original 2026 Advanced Higher Chemistry marking instructions, PDF page 13; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
7.  (c) (i) methylpropan-1-ol            1  2-methylpropan-1-ol is also an
                                            acceptable answer.
         (ii) Less steric hindrance.     1  An answer describing less steric
                                            hindrance is also acceptable.
            OR

            Fewer/smaller atoms around the
            carbon.

            OR

            More steric hindrance around the
            other carbon atom.

            OR

            Bulky groups around the other
            carbon atom.

            OR

            More/larger atoms around the other
            carbon atom.

                                page 13

PDF page 14

Paper 2, Question 8
Original 2026 Advanced Higher Chemistry marking instructions, PDF page 14; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
8.  (a) (i) Heating under reflux         1
        (A)
        (i) Anti-bumping granules        1
        (B)

        (ii) The following 4 points:     2  2 marks awarded for all 4 points.
            • hot water/solvent             1 mark awarded for 2 or 3 points.
            • minimum/small volume          0 marks awarded for 1 point.
              (of solvent)
            • cool                          The order must be correct for the
            • filter                        process – dissolving in a minimum
                                            volume of hot solvent must be
                                            before cooling and then filtering
                                            must come after cooling.

                                            If there is mention of hot filtering
                                            then this must take place before
                                            cooling.
                                            Answers that do not mention
                                            dissolving the vanillin may be
                                            awarded a maximum of 1 mark.

        (iii) 0.47 (g).                  2  0.5/0.469/0.4686 are also
                                            acceptable answers.
            Partial marking
                                            Unit is not required but if given must
            1 mark may be awarded for:      be correct.

            2.93 (g) (theoretical mass of   There may be other acceptable
            vanillin).                      answers based on correct
                                            intermediate rounding.
            OR

            Correctly calculating 16% of an
            incorrect value for the theoretical
            mass of vanillin.

            OR

            0.00308 (actual moles of vanillin).

            OR

            Correctly multiplying an incorrect
            number of moles of vanillin by 152.

                                page 14

PDF page 15

Original 2026 Advanced Higher Chemistry marking instructions, PDF page 15; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
8.  (a) (iv) Lower melting point.        2
            OR

            Over a wider range/melting point
            not sharp.              (1)

            Disruption in (intermolecular)
            bonding in the crystal lattice.

            OR

            Disruption/weakening of the crystal
            lattice.

            OR

            Weakening of (intermolecular)
            forces/van der Waals/H-bonds/LDFs
            between molecules.      (1)

    (b) (i) Electrophilic substitution   1  Substitution on its own is not an
                                            acceptable answer.

        (ii) Acidified (potassium) permanganate. 1 MnO₄⁻ and Cr₂O₇²⁻ are also acceptable
                                            answers but must be
            OR                              acidified/H⁺/H₃O⁺
            Acidified (potassium) dichromate.

            OR

            Hot copper(II) oxide.           Hot CuO is also an acceptable
                                            answer.

                                            Hot copper oxide on its own is not an
                                            acceptable answer.

                                page 15

PDF page 16

Paper 2, Question 9
Original 2026 Advanced Higher Chemistry marking instructions, PDF page 16; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
9.          This is an open-ended question. 3 Award 0 marks where the candidate
                                            has not demonstrated, at an
            1 mark: The candidate has       appropriate level, an understanding
            demonstrated, at an appropriate of the chemistry involved. There is
            level, a limited understanding of the no evidence that they have
            chemistry involved. They have made recognised the area of chemistry
            some statement(s) that are relevant involved, or they have not given any
            to the situation, showing that they statement of a relevant chemistry
            have understood at least a little of principle. Award zero marks also if
            the chemistry within the context. the candidate merely restates the
                                            chemistry given in the question.
            2 marks: The candidate has
            demonstrated, at an appropriate
            level, a reasonable understanding of
            the chemistry involved. They make
            some statement(s) that are relevant
            to the situation, showing that they
            understand the context.
            3 marks: The maximum available
            mark would be awarded to a
            candidate who has demonstrated, at
            an appropriate level, a good
            understanding, of the chemistry
            involved. The candidate shows a
            good comprehension of the
            chemistry of the situation and has
            provided a logically correct answer
            to the question posed. This type of
            response might include a statement
            of the principles involved, a
            relationship or an equation, and the
            application of these to respond to
            the context. The answer does not
            need to be ‘excellent’ or ‘complete’
            for the candidate to gain full marks.

                                page 16

PDF page 17

Paper 2, Question 10
Original 2026 Advanced Higher Chemistry marking instructions, PDF page 17; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
10. (a) (i) —OOCCH(OH)CH(OH)COO^{—}(aq) + 1 State symbols are not required but if
            H₃O⁺(aq).                       given must be correct.
            OR                              H⁺ is not acceptable for H₃O⁺.

            O^{—}OCCH(OH)CH(OH)COO^{—}(aq) +
            H₃O⁺(aq).

            OR

            (OOCCH(OH)CH(OH)COO)²^{—}(aq) +
            H₃O⁺(aq).

            OR

            (CH(OH)COO) ²⁻(aq) + H₃O⁺(aq).
                     2
            OR

            (CH(OH)COO⁻) (aq) + H₃O⁺(aq).
                      2
        (ii) 0.00302 (mol l^{—}¹).       2  0.0030/0.003020/0.0030200
                                            Unit not required but must be
            Partial marking
                                            correct, if given.
            1 mark may be awarded for:

            pH = ½pK - ½log₁ c.
                   a    0
            OR

            Correct rearrangement/substitution
            of pH = ½pK - ½log₁ c.
                     a    0
            OR
            log₁ c = -2.52.
               0
            OR

            Correctly calculated concentration
            from an incorrectly calculated value
            for log₁ c.
                 0
    (b) (i)                              1

        (ii) Separating funnel           1
        (A)

        (ii) K = [tartaric acid(MIBK)]   1  Must be an uppercase K.
        (B)    [tartaric acid(aq)]
        (I)                                 Both state symbols are required.

                                            Must have square brackets.

                                page 17

PDF page 18

Original 2026 Advanced Higher Chemistry marking instructions, PDF page 18; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
10. (b) (ii) 0.00367 (mol)               1  0.0037/0.003675/0.0036749 are also
        (B)                                 acceptable answers.
        (II)
                                            Allow follow through from part
                                            (B)(I).
                                            Unit not required but must be
                                            correct, if given.

        (ii) Use a higher number of extractions 1 Any suggestion that more than
        (C) with a smaller volume of MIBK.  50 cm³ of MIBK is used would not be
                                            awarded the mark.
            OR

            Correct description/example using
            50 cm³ of MIBK.

    (c) (i)                              1

            Both carbon atoms circled.
        (ii)                             1
        (A)

            Half box tolerance.

                                page 18

PDF page 19

Original 2026 Advanced Higher Chemistry marking instructions, PDF page 19; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response               Additional guidance
                                       mark
10. (c) (ii) 10.8 (^{o}).                2  11 is also an acceptable answer.
        (B)
            Partial marking                 General marking principle (h) is
                                            suspended for this question.
            1 mark may be awarded for:
                                            Unit not required but must be
            4^{o} (correct specific rotation from correct if given.
            graph).
            OR

            Correctly calculating an observed
            rotation using an incorrect specific
            rotation read from the graph.

                                page 19

PDF page 20

Paper 2, Question 11
Original 2026 Advanced Higher Chemistry marking instructions, PDF page 20; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response                Additional guidance
                                        mark
11. (a) (i) Active site                  1
        (ii) Covalent/sigma bond (to enzyme) 1

    (b) (i) Antagonist                   1
        (ii) Hydrolysis                  1

        (A)
        (ii) C₉H₁ O₃                     1    Any order.
               0
        (B)

                                page 20

PDF page 21

Paper 2, Question 12
Original 2026 Advanced Higher Chemistry marking instructions, PDF page 21; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response                Additional guidance
                                        mark
12. (a)     C₄N₃O₂H₉                     2    Any order.
                  .
            Partial marking                   Working must be shown.
            1 mark may be awarded for:

            Calculating moles of each element
            (C=3.05, N=2.29, O=1.53, H=6.9).

            OR

            Multiplying incorrect moles by an Rounding of an incorrect ratio is
            appropriate factor to get ratio.  only acceptable if it is rounded
                                              within +/- 0.1

    (b) (i) 131                          1

        (ii) [CH₃]⁺.                     1    Positive charge must be shown on
                                              ion fragment.
            OR
                                              If no bracket + charge must be on
            +CH₃.                             the C atom.
    (c) (i) Vibrate/bend/stretch         1

        (ii)                             1    All must be correct.
                               Wave
              Bond responsible number
                 for peak      (cm⁻¹)

                   O-H         2798

                   C=O         1700

                   C-H         1449

                   C-N         1242

    (d)     (All) peaks are singlets.    1    No effect (on splitting) is
                                              acceptable.
            OR
                                              Any suggestion that there is only
            No splitting/multiplets.          one peak in the spectrum would
                                              not be an acceptable answer.

                                page 21

PDF page 22

Original 2026 Advanced Higher Chemistry marking instructions, PDF page 22; open the image for mathematical layout and diagrams.
Original page image: preserves diagrams, equations, tables and symbols.
Selectable page text
Max
   Question       Expected response                Additional guidance
                                        mark
12. (e)                                  1

            OR

            Any other correct structural formula.

                       [END OF MARKING INSTRUCTIONS]

                                page 22